10 10W STEREO AMPLIFIER FOR CAR RADIO

DESCRIPTION The TDA2004A is a class B dual audio power amplifier in MULTIWATT package specifically designedfor car radioapplications; stereoamplifiersare easily designed using this device that provides a high current capability(up to 3.5 A) and that can drive very low impedance loads (down to 1.

1010W STEREO AMPLIFIER FOR CAR RADIO

■ DESCRIPTION The UTC TDA2004 is a class B dual audio power amplifier and is designed for car radio applications. ■ FEATURES * Low distortion. * Low noise.

10 10W STEREO AMPLIFIER FOR CAR RADIO

10+10W STEREO AMPLIFIER FOR CAR RADIO

10 10W STEREO AMPLIFIER FOR CAR RADIO

DESCRIPTION The TDA2004A is a class B dual audio power amplifier in MULTIWATT package specifically designedfor car radioapplications; stereoamplifiersare easily designed using this device that provides a high current capability(up to 3.5 A) and that can drive very low impedance loads (down to 1.

1010W STEREO AMPLIFIER FOR CAR RADIO

■ DESCRIPTION The UTC TDA2004 is a class B dual audio power amplifier and is designed for car radio applications. ■ FEATURES * Low distortion. * Low noise.

1010W STEREO AMPLIFIER FOR CAR RADIO

■ DESCRIPTION The UTC TDA2004 is a class B dual audio power amplifier and is designed for car radio applications. ■ FEATURES * Low distortion. * Low noise.

1010W STEREO AMPLIFIER FOR CAR RADIO

■ DESCRIPTION The UTC TDA2004 is a class B dual audio power amplifier and is designed for car radio applications. ■ FEATURES * Low distortion. * Low noise.

1010W STEREO AMPLIFIER FOR CAR RADIO

■ DESCRIPTION The UTC TDA2004 is a class B dual audio power amplifier and is designed for car radio applications. ■ FEATURES * Low distortion. * Low noise.

10 10 W stereo amplifier for car radio

Description The TDA2004R is a class B dual audio power amplifier in Multiwatt11 package specifically designed for car radio applications. Power booster amplifiers can be easily designed using this device that provides a high current capability (up to 3.5 A) and can drive very low impedance loads

10 10 W stereo amplifier for car radio

Features ■ Low distortion ■ Low noise ■ Protection against: – Output AC short circuit to ground – Overrating chip temperature – Load dump voltage surge – Fortuitous open ground – Very inductive loads

10 10 W stereo amplifier for car radio

Features ■ Low distortion ■ Low noise ■ Protection against: – Output AC short circuit to ground – Overrating chip temperature – Load dump voltage surge – Fortuitous open ground – Very inductive loads

1010W STEREO AMPLIFIER FOR CAR RADIO

文件：316.39 Kbytes Page：8 Pages

1010W STEREO AMPLIFIER FOR CAR RADIO

文件：316.39 Kbytes Page：8 Pages

1010W STEREO AMPLIFIER FOR CAR RADIO

文件：316.39 Kbytes Page：8 Pages

1010W STEREO AMPLIFIER FOR CAR RADIO

文件：316.39 Kbytes Page：8 Pages

1010W STEREO AMPLIFIER FOR CAR RADIO

文件：316.39 Kbytes Page：8 Pages

Dual SE output power amplifier

RECTIFIER DIODE

RECTIFIER DIODE Repetitive voltage up to 2600 V Mean forward current 3180 A Surge current 33.6 kA

Quad GTL/GTL to LVTTL/TTL bidirectional latched translator

DESCRIPTION The GTL2004 is a quad translating transceiver designed for 3.3V system interface with a GTL/GTL+ bus. The direction pin allows the part to function as either a GTL to TTL sampling receiver or as a TTL to GTL interface. Separate latch enables allow sampling and holding of data from th

Quad GTL/GTL to LVTTL/TTL bidirectional latched translator

DESCRIPTION The GTL2004 is a quad translating transceiver designed for 3.3V system interface with a GTL/GTL+ bus. The direction pin allows the part to function as either a GTL to TTL sampling receiver or as a TTL to GTL interface. Separate latch enables allow sampling and holding of data from th

256KB and 512KB BurstRAM Secondary Cache Modules for PowerPC PReP/CHRP Platforms

The MPC2004 and MPC2005 are designed to provide burstable, high performance 256KB/512KB L2 cache for the PowerPC 60x microprocessor family in conformance with the PowerPC Reference Platform (PReP) and the PowerPC Common Hardware Reference Platform (CHRP) specifications. The modules are configured

900 MHz DRIVER & RAMP SILICON MONOLITHIC INTEGRATED CIRCUIT

The MRFIC2004 is an integrated Driver and Ramp designed for transmitters operating in the 800 MHz to 1.0 GHz frequency range. The Ramp is an integrator which can be used for burst control for TDD/TDMA systems. The Driver uses a cascode configuration for high gain and reverse isolation. A power dow

Integrated Circuit 20W Bridge Booster for Car Radio

20W BRIDGE AMPLIFIER FOR CAR RADIO