Transmissive Optical Sensor with Phototransistor Output

Description This device has a compact construction where the emitting-light sources and the detectors are located face-to-face on the same optical axis. The operating wavelength is 950 nm. The detector consists of a phototransistor. Features ● Compact construction ● No setting efforts ● Polyc

Subminiature Transmissive Optical Sensor with Transistor Output

DESCRIPTION The TCPT1350X01 is a compact transmissive sensor that includes an infrared emitter and a phototransistor detector, located face-to-face in a surface mount package. TCPT1350X01 is especially designed to meet high operating temperature requirements and is released for operating temperat

Transmissive Optical Sensor with Phototransistor Output

FEATURES • Package type: leaded • Detector type: phototransistor • Dimensions (L x W x H in mm): 11.9 x 6.3 x 10.8 • Gap (in mm): 3.1 • Typical output current under test: IC = 4 mA (TCST1103) • Typical output current under test: IC = 2 mA (TCST1202) • Typical output current under test: IC

Transmissive Optical Sensor with Phototransistor Output

DESCRIPTION The TCST1103, TCST1202, and TCST1300 are transmissive sensors that include an infrared emitter and phototransistor, located face-to-face on the optical axes in a leaded package which blocks visible light. These part numbers include options for aperture width. FEATURES • Packag

封装/外壳：开槽模块，4 引线双排 包装：散装 描述：SENSOR OPT SLOT PHOTOTRANS MODUL 传感器，变送器 光学传感器 - 光电遮断器 - 槽型 - 晶体管输出

Transmissive Optical Sensor with Phototransistor Output

Transmissive Optical Sensor with Phototransistor Output

文件：241.51 Kbytes Page：12 Pages

Transmissive Optical Sensor with Phototransistor Output

文件：153.64 Kbytes Page：9 Pages

Reflective Optical Sensor with Transistor Output

文件：263.57 Kbytes Page：11 Pages

Transmissive Optical Sensor with Phototransistor Output

文件：266.57 Kbytes Page：12 Pages

Transmissive Optical Sensor with Phototransistor Output

DESCRIPTION The TCST1103, TCST1202, and TCST1300 are transmissive sensors that include an infrared emitter and phototransistor, located face-to-face on the optical axes in a leaded package which blocks visible light. These part numbers include options for aperture width. FEATURES • Packag

Transmissive Optical Sensor with Phototransistor Output

Transmissive Optical Sensor with Phototransistor Output

文件：266.57 Kbytes Page：12 Pages

Continuous-Time Switch Family

Description The Allegro®A1101-A1104 and A1106 Hall-effect switches are next generation replacements for the popular Allegro 312x and 314x lines of unipolar switches. The A110x family, produced with BiCMOS technology, consists of devices that feature fast power-on time and low-noise operation. Dev

Continuous-Time Switch

Features and Benefits ▪ Continuous-time operation ▫ Fast power-on time ▫ Low noise ▪ Stable operation over full operating temperature range ▪ Reverse battery protection ▪ Solid-state reliability ▪ Factory-programmed at end-of-line for optimum performance ▪ Robust EMC performance ▪ High E

Unipolar Hall-Effect Digital Switch

General Descriptions The A1103 is a unipolar Hall-effect sensor IC fabricated from bipolar technology. The device integrates a voltage regulator, reverse battery protection diode, Hall sensor with dynamic offset cancellation system, temperature compensation circuitry, small signal amplifier, Schm

The Allegro A1101-A1104 and A1106 Hall-effect switches are next generation replacements for the popular Allegro 312x and 314x lines of unipolar switches.

文件：285.9 Kbytes Page：13 Pages

Continuous-Time Switch Family

文件：756.39 Kbytes Page：13 Pages