5V Powered multi-channel RS-232 drivers and receivers

Description The ST202 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ± 12 V is not available. The ST202 uses a single 5 V power supply and only four external capacitors (0.1 µF). Typical application are

5V Powered multi-channel RS-232 drivers and receivers

Description The ST202 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ± 12V is not available. The ST202 uses a single 5V power supply and only four external capacitors (0.1µF). Typical application are in:

5 V powered multi-channel RS-232 drivers and receivers

文件：711.5 Kbytes Page：17 Pages

5V Powered multi-channel RS-232 drivers and receivers

Description The ST202 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ± 12V is not available. The ST202 uses a single 5V power supply and only four external capacitors (0.1µF). Typical application are in:

5V Powered multi-channel RS-232 drivers and receivers

Description The ST202 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ± 12 V is not available. The ST202 uses a single 5 V power supply and only four external capacitors (0.1 µF). Typical application are

5 V powered multi-channel RS-232 drivers and receivers

文件：711.5 Kbytes Page：17 Pages

封装/外壳：16-SOIC（0.154"，3.90mm 宽） 包装：管件 描述：IC TRANSCEIVER FULL 2/2 16SO 集成电路（IC） 驱动器，接收器，收发器

SUPERFAST RECOVERY RECTIFIERS(VOLTAGE - 50 to 600 Volts CURRENT - 2.0 Amperes)

FEATURES ● Superfast recovery times-epitaxial construction ● Low forward voltage, high current capability ● Exceeds environmental standards of MIL-S-19500/228 ● Hermetically sealed ● Low leakage ● High surge capability ● Plastic package has Underwriters Laboratories Flammability Classificat

IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

FEATURES • Plastic material has Underwriters Laboratory Flammability Classification 94V-O • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • Surge overload rating : 60 Amperes peak

FAST SWITCHING PLASTIC RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes FEATURES High current capability Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound 2.0 ampere operation at TA =55 ¢J with no thermal runaway

SCHOTTKY BARRIER RECTIFIERS(2.0A,20-60V)

Using the Schottky Barrier principle with a Molybdenum barrier metal. These state-of-the-art geometry features epitaxial construction with oxide passivation and metal overly contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity protection diodes.

ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

VOLTAGE 50 to 1000 Volts CURRENT 2.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound • Exceeds environmental standards of MIL-S-19500/228. • Ultra Fast switching for high efficiency. • In