UART WITH 16-BYTE FIFO?셲

GENERAL DESCRIPTION The ST16C550 (550) is a universal asynchronous receiver and transmitter with 16 byte transmit and receive FIFO. It operates at 2.97 to 5.5 volts. A programmable baud rate generator can select transmit and receive clock rates from 50 bps to 1.5 Mbps. FEATURES • Pin to pin and

UART WITH 16-BYTE FIFO’s

GENERAL DESCRIPTION The ST16C550 (550) is a universal asynchronous receiver and transmitter with 16 byte transmit and receive FIFO. It operates at 2.97 to 5.5 volts. A programmable baud rate generator can select transmit and receive clock rates from 50 bps to 1.5 Mbps. The ST16C550 is an imp

UART WITH 16-BYTE FIFO?셲

文件：241.15 Kbytes Page：35 Pages

封装/外壳：40-DIP（0.600"，15.24mm） 包装：托盘 描述：IC UART FIFO 16BYTE 40DIP 集成电路（IC） UART（通用异步接收器发送器）

封装/外壳：40-DIP（0.600"，15.24mm） 包装：托盘 描述：IC UART 40DIP 集成电路（IC） UART（通用异步接收器发送器）

UART WITH 16-BYTE FIFO’s

GENERAL DESCRIPTION The ST16C550 (550) is a universal asynchronous receiver and transmitter with 16 byte transmit and receive FIFO. It operates at 2.97 to 5.5 volts. A programmable baud rate generator can select transmit and receive clock rates from 50 bps to 1.5 Mbps. The ST16C550 is an imp

FIFO UART

DESCRIPTION The Epic Ei16C550 Universal Asynchronous Receiver Transmitter (UART) is a CMOS-VLSI communication device in a single package. FEATURES • 5V Operation • Full duplex asynchronous receiver and transmitter • Easily interfaces to most popular microprocessors • Adds or deletes st

FIFO UART

DESCRIPTION The Epic Ei16C550 Universal Asynchronous Receiver Transmitter (UART) is a CMOS-VLSI communication device in a single package. FEATURES • 5V Operation • Full duplex asynchronous receiver and transmitter • Easily interfaces to most popular microprocessors • Adds or deletes st

ASYNCHRONOUS COMMUNICATIONS ELEMENT WITH FIFOs

Descriptions The GM16C550 is an asynchronous communications element (ACE) that is functionally equivalent to the GM16C450, and addition-ally incorporates a 16byte FIFOs are available on both the transmitter and receiver, and can be activated by placing the device in the FIFO mode. After a reset,

ASYNCHRONOUS COMMUNICATIONS ELEMENT

文件：434.79 Kbytes Page：31 Pages