4-Wire Ionization Duct Smoke Detector

The DH100ACDCI senses smoke in velocities from 500 to 4,000 feet per minute. When smoke is detected, all interconnected Innovairs will initiate their relays. However, to quickly locate the fre source, only the detector sensing smoke will alarm. Two DPDT Form-C relay contacts, connected to auxiliar

Analog addressable low-flow photoelec-tronic non-relay duct smoke sensor

Description The Gamewell-FCI Velociti® Series, low-flow photoelectronic air duct smoke sensors are capable of sensing smoke in air velocities from 100 to 4,000 feet per minute (0.5 to 20.32 m/sec.). ADPF sensors feature low-flow technology that enables duct smoke detection throughout a broad ran

Intelligent Duct Smoke Detectors

文件：266.2 Kbytes Page：4 Pages

High-Temperature Duct Smoke Detector

文件：169.56 Kbytes Page：2 Pages

Intelligent Duct Smoke Detector

文件：800.97 Kbytes Page：2 Pages

Intelligent Low-Flow Photoelectric Duct Smoke Detectors

文件：225.75 Kbytes Page：4 Pages

Intelligent Low-Flow Duct Smoke Detectors

文件：404.84 Kbytes Page：4 Pages

Customer Specification

Construction 1) Tubing Type Dual Wall Heat Shrinkable Tubing 2) Tubing Material Semi Rigid Cross Linked Polyolefin 3) Minimum Supplied ID(In) 1.000 4) Maximum Recovered ID (In) 0.400 5) Nominal Recovered Wall Thickness(In) 0.075 6) Nominal Recovered Melt Wall (In) 0.040 7) Color(s) BLACK

PHOTOTRANSISTORS

[SUNSHINE SCIENCE] The ST-302 a high-sensitivity NPN silicon phototransistor mounted in a clear low profile and side-viewing package. This phototransistor is both compact and easy to mount. FEATURES • Side-viewing plastic package • Low profile package APPLICATIONS • Photointerrupters

RoHS-Compliant Commencing With 11/5/2005 Production

Construction 1) Tubing Type Adhesive Lined Heat Shrinkable Tubing 2) Tubing Material Irradiated Polyolefin w/ Adhesive 3) Minimum Supplied ID(In) 0.125 4) Maximum Recovered ID(In) 0.062 5) Minimum Recovered Adhesive Wall Thickness(In) 0.026 6) Color(s) BLACK

RoHS-Compliant Commencing With 11/5/2005 Production

Construction 1) Tubing Type Adhesive Lined Heat Shrinkable Tubing 2) Tubing Material Irradiated Polyolefin w/ Adhesive 3) Minimum Supplied ID(In) 0.187 4) Maximum Recovered ID(In) 0.093 5) Minimum Recovered Adhesive Wall Thickness(In) 0.026 6) Color(s) BLACK

RoHS-Compliant Commencing With 11/5/2005 Production

Construction 1) Tubing Type Adhesive Lined Heat Shrinkable Tubing 2) Tubing Material Irradiated Polyolefin w/ Adhesive 3) Minimum Supplied ID(In) 0.187 4) Maximum Recovered ID(In) 0.093 5) Minimum Recovered Adhesive Wall Thickness(In) 0.026 6) Color(s) BLACK

RoHS-Compliant Commencing With 11/5/2005 Production

Construction 1) Tubing Type Adhesive Lined Heat Shrinkable Tubing 2) Tubing Material Irradiated Polyolefin w/ Adhesive 3) Minimum Supplied ID(In) 0.187 4) Maximum Recovered ID(In) 0.093 5) Minimum Recovered Adhesive Wall Thickness(In) 0.026 6) Color(s) BLACK

RoHS-Compliant Commencing With 12/5/2005 Production

Construction 1) Tubing Type Dual Wall Heat Shrinkable Tubing 2) Tubing Material Flexible Dual Lined Irradiated Polyolefin 3) Minimum Supplied ID(In) 0.748 4) Maximum Recovered ID (In) 0.236 5) Nominal Recovered Wall Thickness(In) 0.071 6) Nominal Recovered Melt Wall (In) 0.035 7) Color(s) B

RoHS-Compliant Commencing With 12/1/2005 Production

Construction 1) Tubing Type Dual Wall Heat Shrinkable Tubing 2) Tubing Material Flexible Dual Lined Irradiated Polyolefin 3) Minimum Supplied ID(In) 0.374 4) Maximum Recovered ID (In) 0.118 5) Nominal Recovered Wall Thickness(In) 0.051 6) Nominal Recovered Melt Wall (In) 0.025 7) Color(s) B

RoHS-Compliant Commencing With 12/1/2005 Production

Construction 1) Tubing Type Dual Wall Heat Shrinkable Tubing 2) Tubing Material Flexible Dual Lined Irradiated Polyolefin 3) Minimum Supplied ID(In) 0.374 4) Maximum Recovered ID (In) 0.118 5) Nominal Recovered Wall Thickness(In) 0.051 6) Nominal Recovered Melt Wall (In) 0.025 7) Color(s) B

RoHS-Compliant Commencing With 12/5/2005 Production

Construction 1) Tubing Type Dual Wall Heat Shrinkable Tubing 2) Tubing Material Flexible Dual Lined Irradiated Polyolefin 3) Minimum Supplied ID(In) 0.748 4) Maximum Recovered ID (In) 0.236 5) Nominal Recovered Wall Thickness(In) 0.071 6) Nominal Recovered Melt Wall (In) 0.035 7) Color(s) B

RoHS-Compliant Commencing With 12/5/2005 Production

Construction 1) Tubing Type Dual Wall Heat Shrinkable Tubing 2) Tubing Material Flexible Dual Lined Irradiated Polyolefin 3) Minimum Supplied ID(In) 0.748 4) Maximum Recovered ID (In) 0.236 5) Nominal Recovered Wall Thickness(In) 0.071 6) Nominal Recovered Melt Wall (In) 0.035 7) Color(s) B

RoHS-Compliant Commencing With 12/1/2005 Production

Construction 1) Tubing Type Dual Wall Heat Shrinkable Tubing 2) Tubing Material Flexible Dual Lined Irradiated Polyolefin 3) Minimum Supplied ID(In) 0.374 4) Maximum Recovered ID (In) 0.118 5) Nominal Recovered Wall Thickness(In) 0.051 6) Nominal Recovered Melt Wall (In) 0.025 7) Color(s) B

RoHS-Compliant Commencing With 12/1/2005 Production

Construction 1) Tubing Type Dual Wall Heat Shrinkable Tubing 2) Tubing Material Flexible Dual Lined Irradiated Polyolefin 3) Minimum Supplied ID(In) 0.374 4) Maximum Recovered ID (In) 0.118 5) Nominal Recovered Wall Thickness(In) 0.051 6) Nominal Recovered Melt Wall (In) 0.025 7) Color(s) B

RoHS-Compliant Commencing With 12/5/2005 Production

Construction 1) Tubing Type Dual Wall Heat Shrinkable Tubing 2) Tubing Material Flexible Dual Lined Irradiated Polyolefin 3) Minimum Supplied ID(In) 0.748 4) Maximum Recovered ID (In) 0.236 5) Nominal Recovered Wall Thickness(In) 0.071 6) Nominal Recovered Melt Wall (In) 0.035 7) Color(s) B

RoHS-Compliant Commencing With 12/1/2005 Production

Construction 1) Tubing Type Dual Wall Heat Shrinkable Tubing 2) Tubing Material Flexible Dual Lined Irradiated Polyolefin 3) Minimum Supplied ID(In) 0.374 4) Maximum Recovered ID (In) 0.118 5) Nominal Recovered Wall Thickness(In) 0.051 6) Nominal Recovered Melt Wall (In) 0.025 7) Color(s) B

RoHS-Compliant Commencing With 12/1/2005 Production

Construction 1) Tubing Type Dual Wall Heat Shrinkable Tubing 2) Tubing Material Flexible Dual Lined Irradiated Polyolefin 3) Minimum Supplied ID(In) 0.374 4) Maximum Recovered ID (In) 0.118 5) Nominal Recovered Wall Thickness(In) 0.051 6) Nominal Recovered Melt Wall (In) 0.025 7) Color(s) B

Photo transistors(a high-sensitivity NPN silicon phototransistor mounted in a clear sidelooking)

The ST-305 a high-sensitivity NPN silicon phototransistor mounted in a clear sidelooking package, is compact, low profile and easy to mount. FEATURES • Low profile package • Compact • Low - cost • Sidelooking plastic package APPLICATIONS • Photointerrupters • Optical switches

Photo transistors(high-sensitivity Silicon phototransistor)

The ST-309 is a doble type high-sensitivity Silicon phototransistor. This phototransistor is compact size FEATURES • Side-viwering plastic package • Bult-in 2ch phototransistors APPLICATIONS • Optical mouses • Encoders

PHOTO INTERRUPTERS

PHOTO INTERRUPTERS

Photo transistors(high-sensitivity Silicon phototransistor with two-phaseoutput)

The ST-313R4 is a high-sensitivity Silicon phototransistor with two-phaseoutput. This phototransistor is compact, and the best for the mouse. FEATURES • Visible ray cut off mold type • Bult-in 2ch phototransistors APPLICATIONS • Optical mouses • Encoders

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Photo transistors(high sensitivity NPN silicon phototransistor mounted)

The ST–325 is a high–sensitivity NPN silicon phototransistor mounted in a red low profile side– viewing package. This phototransistor is both ultra– compact and easy to mount. FEATURES •Side–viewering plastic package •Ultra– Compact / Low–profile package APPLICATIONS •Photo Interrupters •Tap

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Surface Mount Cermet Trimmers (single turn)

FEATURES • Lead (Pb)-free soldering, Cadmium-free • Top and side adjustment styles • Rotor with a cross slot for ease of adjustment • Leaded terminals provide strong as adhesive strength    against P.C.B. bending • J-hook, Gull wing and leaded terminal configurations • Sealed / Washable •

Lockit™ ST and RDD Strain Relief Bushings

文件：63.38 Kbytes Page：1 Pages