Programmable Charge Pump

DESCRIPTION... The SP782 and SP784 are monolithic programmable voltage converters that produce a positive and negative voltage from a single supply. The SP782 and SP784 are programmable such that the charge pump outputs either a ±10V voltage or a ±5V voltage by control of two pins. Both products

Programmable Charge Pump

文件：224.93 Kbytes Page：16 Pages

Automotive Isolation Amplifier with R2Coupler Isolation

Description The ACPL-782T isolation amplifier was designed for voltage and current sensing in electronic motor drives and battery system monitoring. In a typical implementation, and motor currents flow through an external resistor and the resulting analog voltage drop is sensed by the ACPL-782T.

2.5 ohm Quad SPST Switches in Chip Scale Package

GENERAL DESCRIPTION The ADG781, ADG782, and ADG783 are monolithic CMOS devices containing four independently selectable switches. These switches are designed on an advanced submicron process that provides low power dissipation and high switching speed, low on resistance, low leakage currents and

2.5 ohm Quad SPST Switches in Chip Scale Package

GENERAL DESCRIPTION The ADG781, ADG782, and ADG783 are monolithic CMOS devices containing four independently selectable switches. These switches are designed on an advanced submicron process that provides low power dissipation and high switching speed, low on resistance, low leakage currents and

3rd generation Intel짰 Core??processor-based platform

文件：2.29182 Mbytes Page：2 Pages

LGA1155 3rd Generation Intel짰 Core??i7/i5/i3/Pentium ATX with DVI/VGA, DDR3, SATA III

文件：660.83 Kbytes Page：2 Pages