3.3-V ABT OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC) Support Unregulated Battery Operation Down to 2.7 V Typical VOLP (Output Ground Bounce)

3.3 V octal transceiver with 30 Ω termination resistors; 3-state

1. General description The 74LVT2245; 74LVTH2245 is an 8-bit transceiver with 30 Ω termination resistors and 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Bus hold da

Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25廓 Series Resistors in the B Port Outputs

General Description The LVT2245 and LVTH2245 contain eight non-inverting bidirectional buffers with 3-STATE outputs and are intended for bus-oriented applications. Features ■ Input and output interface capability to systems at 5V VCC ■ Equivalent 25: series resistor on B Port outputs

3.3 V octal transceiver with 30 W termination resistors; 3-state

Low Voltage Octal Bidirectional Transceiver

文件：294.2 Kbytes Page：11 Pages

3.3 V octal transceiver with 30 W termination resistors; 3-state