3.3-V ABT OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC) Supports Unregulated Battery Operation Down To 2.7 V Typical VOLP (Output Ground Bounce)

ABT octal inverting buffer 3-State

DESCRIPTION The LVT240 is a high-performance BiCMOS product designed for VCC operation at 3.3V. FEATURES • Octal bus interface • 3-State buffers • Output capability: +64mA/-32mA • TTL input and output switching levels • Input and output interface capability to systems at 5V supply • B

Low Voltage Octal Buffer/Line Driver with 3-STATE Outputs

General Description The LVT240 and LVTH240 are inverting octal buffers and line drivers designed to be employed as memory address drivers, clock drivers and bus oriented transmitters or receivers which provides improved PC board density. The LVTH240 data inputs include bushold, eliminating the n

3.3 V Octal inverting buffer/line driver; 3-state

1. General description The 74LVT240 is an 8-bit inverting buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the output

ABT octal inverting buffer 3-State

DESCRIPTION The LVT240 is a high-performance BiCMOS product designed for VCC operation at 3.3V. FEATURES • Octal bus interface • 3-State buffers • Output capability: +64mA/-32mA • TTL input and output switching levels • Input and output interface capability to systems at 5V supply • B

Low Voltage Octal Buffer/Line Driver with 3-STATE Outputs

文件：326.63 Kbytes Page：10 Pages