SNx4LVCH245A Octal Bus Transceivers With Tri-State Outputs

1 Features 1• Operate From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 6.3 ns at 3.3 V • Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, TA = 25°C • Support Mixed-Mode Signal Operation on Al

Octal bus transceiver; 3-state

1. General description The 74LVC245A; 74LVCH245A is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3 V or

Octal bus transceiver with direction pin with 5 V tolerant input/outputs (3-state)

DESCRIPTION The 74LVC245A/74LVCH245A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. FEATURES • 5 V tolerant inputs/outputs for interfacing with 5 V logic • Wide supply voltage range from 1.2 to 3.6 V • CMOS low power

Octal bus transceiver; 3-state

Octal bus transceiver with direction pin with 5-volt tolerant inputs/outputs (3-State)

DESCRIPTION The 74LVC245A/74LVCH245A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. FEATURES • 5 V tolerant inputs/outputs for interfacing with 5 V logic • Wide supply voltage range from 1.2 to 3.6 V • CMOS low power

OCTAL BUS TRANSCEIVER WITH BUS HOLD / 3 STATE OUTPUTS

文件：469.34 Kbytes Page：10 Pages