丝印代码：SN74HC365N；SNx4HC365 Hex Buffers and Line Drivers With 3-State Outputs

1 Features • Wide operating voltage range of 2 V to 6 V • High-current 3-state outputs drive bus lines, buffermemory address registers, or drive up to 15 LSTTL loads • True outputs • Low power consumption, 80-μA max ICC • Typical tpd = 10 ns • ±6-mA output drive at 5V • Low input current

Hex buffer/line driver; 3-state

1. General description The 74HC365; 74HCT365 is a hex buffer/line driver with 3-state outputs controlled by the output enable inputs (OEn). A HIGH on OEn causes the outputs to assume a high impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to i

Hex buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT365 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Non-inverting outputs • Output capability: bus driver • ICC category: MSI

Hex 3-State Noninverting Buffer with Common Enables

Hex 3-State Noninverting Buffer with Common Enables High-Performance Silicon-Gate CMOS The SL74HC365 is identical in pinout to the LS/ALS365. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. This device is a

Hex buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT365 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Non-inverting outputs • Output capability: bus driver • ICC category: MSI

HEX BUFFER / LINE DRIVER 3-STATE

文件：166.4 Kbytes Page：4 Pages