SNx4AHCT125 Quadruple Bus Buffer Gates With 3-State Outputs

1 Features • Inputs are TTL-voltage compatible • Latch-up performance exceeds 250 mA per JESD 17 2 Applications • Enable or disable a digital signal • Controlling an indicator LED • Debounce a switch • Eliminate slow or noisy input signals 3 Description The ’AHCT125 devices are quadr

SN74AHCT125-Q1 Automotive Quadruple Bus Buffer Gates With 3-State Outputs

1 Features • Inputs are TTL-voltage compatible • Latch-up performance exceeds 250 mA per JESD 17 • Functional Safety Capable – Documentation available to aid safety system design 2 Applications • Enable or disable a digital signal • Controlling an indicator LED • Debounce a switch • E

QUADRUPLE BUS BUFFER GATE WITH 3-STATE OUTPUTS

Controlled Baseline − One Assembly/Test Site, One Fabrication Site Extended Temperature Performance of −40°C to 125°C Enhanced Diminishing Manufacturing Sources (DMS) Support Enhanced Product-Change Notification Qualification Pedigree† ESD Protection Exceeds 2000 V Per MIL-STD-883, Metho

具有 TTL 兼容型 CMOS 输入和三态输出的增强型产品 4 通道、4.5V 至 5.5V 缓冲器

QUADRUPLE BUS BUFFER GATE WITH 3-STATE OUTPUTS

文件：556.86 Kbytes Page：12 Pages

Quad buffer/line driver; 3-state

1. General description The 74AHC125; 74AHCT125 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A HIGH on nOE causes the outputs to assume a high impedance OFF-state. Inputs are overvoltage tolerant. This feature allows the use of these devices as

Quad buffer/line driver; 3-state

DESCRIPTION The 74AHC/AHCT125 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard No. 7A. The 74AHC/AHCT125 are four non-inverting buffer/line drivers with 3-state outputs. The 3-state outputs (nY) a

Quad buffer/line driver; 3-state

QUADRUPLE 3-STATE BUFFERS OE LOW

Description The 74AHCT125 provides provides four independent buffer gates with 3-state outputs. Each buffer has a separate enable pin that if driven with a high logic level places the corresponding output in the high impedance state. The device is designed for operation with a power supply range

Quad buffer/line driver; 3-state