Hyperabrupt Junction Tuning Varactors

Description The SMV1142–SMV1148 series of silicon hyperabrupt junction varactor diodes is specifically designed with an increasing gamma vs. voltage characteristic. This characteristic will result in improved VCO frequency-voltage linearity, in comparison to a conventional hyperabrupt junction

Hyperabrupt Junction Tuning Varactors

Description The SMV1142–SMV1148 series of silicon hyperabrupt junction varactor diodes are specifically designed with an increasing gamma vs. voltage characteristic. This characteristic will result in improved VCO frequency-voltage linearity, in comparison to a conventional hyperabrupt junction

Hyperabrupt Junction Tuning Varactors

Description The SMV1142–SMV1148 series of silicon hyperabrupt junction varactor diodes is specifically designed with an increasing gamma vs. voltage characteristic. This characteristic will result in improved VCO frequency-voltage linearity, in comparison to a conventional hyperabrupt junction

Hyperabrupt Junction Tuning Varactors

Description The SMV1142–SMV1148 series of silicon hyperabrupt junction varactor diodes is specifically designed with an increasing gamma vs. voltage characteristic. This characteristic will result in improved VCO frequency-voltage linearity, in comparison to a conventional hyperabrupt junction

1143 Differential Pressure Gauge

FEATURES Glass filled nylon case High static pressure capability of 500 psi Ranges from 1 IWD to 25 IWD Reed switches (OPT.) for direct system control Superior magnets for smoother pointer motion Buna-N Diaphragm & O-Rings (others available) Large convoluted diaphragm actuator

Micro Servo - MG90D High Torque Metal Gear

 Size : 22.8 x 12.2 x 28.5 mm  Voltage : 4.8V to 6V DC  Weight: 13.4 grams  Speed : 0.1 sec/60degrees (at 4.8V), 0.08 sec/60 degrees (at 6.0V)  Stall Torque : At 4.8V: 2.1 kg-cm / 25 oz-in. At 6.0V: 2.4 kg-cm / 30.5 oz-in  Spline Count: 20

Sensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches

Features and Benefits ▪ Chopper stabilization ▫ Low switchpoint drift over operating temperature range ▫ Low sensitivity to stress ▪ Factory programmed at end-of-line for optimized switchpoints ▪ On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board vo

Sensitive Two-Wire Chopper-Stabilized Unipolar Hall-Effect Switches

FEATURES AND BENEFITS ■Chopper stabilization • Low switchpoint drift over operating temperature range • Low stress sensitivity ■Factory programmed at end-of-line for optimized switchpoints ■On-chip protection • Supply transient protection • Reverse-battery protection • On-board voltage re

Original Strain Relief Bushings

文件：129.02 Kbytes Page：1 Pages