Transient Voltage Suppressor 5.0 to 170 Volts 600 Watt

Features ● For surface mount applications in order to optimize board space ● Low profile package ● Fast response time: typical less than 1.0ps from 0 volts to VBR minimum ● Low inductance ● Excellent clamping capability

UNI- AMD BI-DIRECTIONAL SURFACE MOUNT

FEATURES • LOW PROFILE PACKAGE FOR SURFACE MOUNTING • VOLTAGE RANGE: 5.0 TO 170 VOLTS • 600 WATTS PEAK POWER • UNIDIRECTIONAL AND BIDIRECTIONAL • LOW INDUCATANCE

Silicon Avalanche Diodes - 600W Surface Mount Transient Voltage Suppressors

Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus and other integrated circuits. FEATURES • Stand-off Voltage Range 5.0 to 170 Volts • Uni-directional and Bi-directional • Glass passiv

Surface Mount Transient Voltage Suppressor

Features ◇ For surface mounted application ◇ Low profile package ◇ Built-in strain relief ◇ Glass passivated junction ◇ Excellent clamping capability ◇ Fast response time: Typically less than 1.0ps from 0 volt to BV min ◇ Typical IR less than 1uA above 10V ◇ High temperature soldering guar

POWER 600Watts VOLTAGE 5.0 to 188 Volts

Features • Underwriters Laboratory recognition under UL standard for safety 497B : Isolated loop curcuit protection • Low profile package with built-in strain relief for surface mounted applications • Glass passivated junction • Low incremental surge resistance, excellent clamping capability

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 5.0 to 170 Volts 600 Watts Peak Power FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High tem

Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast r

TRANSIENT VOLTAGE SUPPRESSOR

FEATURES ● Glass passivated junction ● Low incremental surge resistance, excellent clamping capability ● Low profile package with built-in strain relief for surface mounted applications ● 600W peak pulse power capability with a 10/1000μs Wave form, repetition rate (duty cycle): 0.01 ● Ver

SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 600 Watts FEATURES ● Rating to 200V VBR ● For surface mounted applications ● Reliable low cost construction utilizing molded plastic technique ● Plastic material has UL recognition 94V-0 ● Typical IR less than 1µA above 10V ● Fast resp

TRANSIENT VOLTAGE SUPPRESSORS

Description • Devices for bidirectional applications • For bidirectional use C or CA suffix for types SMBJ5.0 thru types SMBJ170A (e.g. SMBJ5.0C, SMBJ170CA) • Electrical characteristics apply in both directions Features • Plastic package has Underwriters Laboratory Flammability Classification

SURFACE MOUNT TVS DIODE Electrical Characteristics, 33 to 170 Volts

SURFACE MOUNT TVS DIODE Electrical Characteristics, 33 to 170 Volts TRANSIENT VOLTAGE SUPPRESSOR DIODE Operating Teperature: -55°c to 150°c

Transient Voltage Suppressors

PRODUCT SUMMARY Stand-off Voltage ratings from 5.0V to 440V Peak pulse power 600W in SMB surface-mount package FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Low profile package with built-in strain relief for surface-mount • G

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE RANGE 50 to 170 Volts CURRENT 600 Watts Peak Power Features * For surface mounted application * Low profile package * Built-in strain relief * Glass passivated junction * Excellent clamping capability * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical

TECHNICAL SPECIFICATIONS OF SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE RANGE - 5.0 to 170 Volts PEAK PULSE POWER - 600 Watts FEATURES * Ideal for surface mounted applications * 400 Watts Peak Pulse Power capability on 10/1000 µs waveform * Excellent clamping capability * Low zener impedance * Fast response time * Glass passivated junction

5.0V to 170V SMD TRANSIENT VOLTAGE SUPPRESSORS

Features ■ 600 WATT PEAK POWER PROTECTION ■ EXCELLENT CLAMPING CAPABILITY ■ FAST RESPONSE TIME ■ TYPICAL IR

SURFACE MOUNT TRANSIERT VOLTAGE SUPPRESSOR

■ Features ● PPP 600W ● VBR 5.0V-440V ■ Applications ● Clamping Voltage

Surface Mount Transient Voltage Suppressors

Peak Pulse Power 600W Stand-off Voltage 5.0 to 440V Features • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Low profile package with built-in strain relief for surface mounted applications • Glass passivated junction • Low incremental surge resis

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Breskdown voltage: 5.0-170 Volts Peak pulse power: 600 Wallts FEATURE ◆ Optimzed for LAN protection applications ◆ Ideal for ESD protection of data lines in accordance with IEC 1000-4-2(IEC801-2) ◆ Ideal for EFT protection of data lines in accordance with IEC1000-4-4(IEC801-2) ◆ Plastic packa

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

600 Watts Surface Mount Transient Voltage Suppressor

Features ✧ For surface mounted application ✧ Low profile package ✧ Built-in strain relief ✧ Glass passivated junction ✧ Excellent clamping capability ✧ Fast response time: Typically less than 1.0ps from 0 volt to BV min. ✧ Typical IR less than 1μA above 10V ✧ High temperature soldering

SURFACE MOUNT 600W TVS

SURFACE MOUNT 600W TVS

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

600W Surface Mount Transient Voltage Suppressors

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4-2 ESD 30KV(Ai

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

TRANSIENT VOLTAGE SUPPRESSORS

Features ● For surface mounted applications in order to optimize board space ● Low profile space ● Glass passivated chip ● Low inductance ● Excellent clamping capability ● Very fast response time ● Typical ID less than 1µA at VWM ● 600W peak pulse power capability with a 10/1000 µs wavefor

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

SURFACE MOUNT 600 Watt Transient Voltage Suppressor

DESCRIPTION This SMBJ5.0-170A or SMBG5.0-170A series of surface mount 600 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available in J-bend design (SMBJ) with the DO-214AA package for greater PC board mounting dens

SMD Transient Voltage Suppressor

600W Surface Mount Transient Voltage Suppressors- 5.0V - 440V

SURFACE MOUNT 600 Watt Transient Voltage Suppressor

DESCRIPTION This SMBJ5.0-170A or SMBG5.0-170A series of surface mount 600 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available in J-bend design (SMBJ) with the DO-214AA package for greater PC board mounting dens

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODE

Features Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material: UL Flammability Classification Rating 94V-0

SAMYANG ELECTRONICS

600 Watt Peak Power Dimension

3.3 To 440V 600W Surface Mount Transient Voltage Suppressors (TVS)

Features For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability Typical IR less than 1μA above 10V 600W Peak power capability at 10 × 1000μs waveform Repetition rate

TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER

DESCRIPTION The SMBJ series support both Uni and Bi direction. FEATURES  Availabl e in SM B P ackage

Transient Voltage Suppressor Diodes

文件：432.81 Kbytes Page：5 Pages

TRANSIENT VOLTAGE SUPPRESSORS

文件：335.38 Kbytes Page：5 Pages

Surface Mount Transient Voltage Suppressors

文件：279.72 Kbytes Page：4 Pages

TRANSIENT VOLTAGE SUPPRESSOR

文件：261.92 Kbytes Page：6 Pages

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

文件：290.22 Kbytes Page：6 Pages

SMB Plastic-Encapsulate Diodes

文件：1.26123 Mbytes Page：7 Pages

600 Watts Suface Mount Transient Voltage Suppressor

文件：338.6 Kbytes Page：7 Pages

Surface Mount Transient Voltage Suppressor

文件：1.13411 Mbytes Page：4 Pages

Surface Mount TRANSZORB Transient Voltage Suppressors

文件：112.8 Kbytes Page：6 Pages

SURFACE MOUNT 600 Watt Transient Voltage Suppressor

文件：183.1 Kbytes Page：4 Pages

SMB Plastic-Encapsulate Diodes

文件：1.30365 Mbytes Page：7 Pages

5.0 to 440Volts 600Watts SMD TRANSIENT VOLTAGE SUPPRESSORS

文件：134.65 Kbytes Page：5 Pages

Transient Voltage Suppressor Diodes

文件：213.62 Kbytes Page：5 Pages

Transient Voltage Suppressor

文件：837.9 Kbytes Page：7 Pages

Surface Mount Transient Voltage Suppressors

文件：739.17 Kbytes Page：7 Pages

Transient Voltage Suppressor

文件：326.15 Kbytes Page：4 Pages

Transient Voltage Suppressor 5.0 to 440 Volts 600 Watt

文件：202.89 Kbytes Page：9 Pages