Transient Voltage Suppressor 5.0 to 170 Volts 600 Watt

Features ● For surface mount applications in order to optimize board space ● Low profile package ● Fast response time: typical less than 1.0ps from 0 volts to VBR minimum ● Low inductance ● Excellent clamping capability

DEVICES FOR BIPOLAR APPLICATIONS

Features • Glass passivated junction. • 600W Peak Pulse Power capability on 10/1000 µs waveform. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical

Silicon Avalanche Diodes - 600W Surface Mount Transient Voltage Supressors

Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus and other integrated circuits. FEATURES • Stand-off Voltage Range 5.0 to 170 Volts • Uni-directional and Bi-directional • Glass passiv

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 5.0 to 170 Volts 600 Watts Peak Power FEATURES * For surface mount application 1.0ps from 0 volt to BV min. * High temperature soldering guaranteed: 260°C / 10 seconds at terminals * Typical IR less than 1mA above 10V * Fast response time: Typically less than * Built-in strain

600W Surface Mount Transient Voltage Suppressors

Peak Pulse Power 600 Watt Stand-off Voltage 5.0 To 170 VOLTS Feature: * 600 Watt Peak Power Dissipation * Glass Passivated Die Construction * Excellent Clamping Capability Fast Response Time * Plastic Material Has UL Flammability Classification Rating 94V-O

POWER 600Watts VOLTAGE 5.0 to 188 Volts

Features • Underwriters Laboratory recognition under UL standard for safety 497B : Isolated loop curcuit protection • Low profile package with built-in strain relief for surface mounted applications • Glass passivated junction • Low incremental surge resistance, excellent clamping capability

600W Surface Mount Transient Voltage Suppressor

600W Surface Mount Transient Voltage Suppressor Features • Stand-off voltage from 5.0 to 170 volts • 600W Peak Pulse Power capability on 10/1000 µs waveform repetition rate(duty cycle): 0.01 • Fast response time: typically less than 1.0ps from 0v to VBR • Low incremental surge resistance, exc

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-5.0 TO 440 Volts 600 Watt Peak Pulse Power FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition rate (duty cycle):0.01 •

SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 600 Watts FEATURES ● Rating to 200V VBR ● For surface mounted applications ● Reliable low cost construction utilizing molded plastic technique ● Plastic material has UL recognition 94V-0 ● Typical IR less than 1µA above 10V ● Fast resp

600W Peak Power Surface Mount TVS

FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260°C / 10 seconds at

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage : 5.0 to 188V Peak Pulse Power : 600 W FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low inductance * Response Time Typically

TRANSIENT VOLTAGE SUPPRESSORS

Description • Devices for bidirectional applications • For bidirectional use C or CA suffix for types SMBJ5.0 thru types SMBJ170A (e.g. SMBJ5.0C, SMBJ170CA) • Electrical characteristics apply in both directions Features • Plastic package has Underwriters Laboratory Flammability Classification

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

PEAK PULSE POWER 600 WATTS REVERSE VOLTAGE 6.8 to 520 Volts FEATURES • Glass passivated chip • 600W peak pulse power capability woth a 10/1000μs waveform, repetitive rate (duty cycle):0.01 • Low leakage • Uni and Bidirectional unit • Excellent clamping capability • Very fast respon

Transient Voltage Suppression Diodes

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 5.0 to 440 Volts Peak Pulse Power - 600 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Plastic Case Material has UL Flammability Classification Rating 94V-O ● Typical IR less than 1μA abov

Silicon Avalanche Diodes - 600W Surface Mount Transient Voltage Suppressors

Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus and other integrated circuits. FEATURES • Stand-off Voltage Range 5.0 to 170 Volts • Uni-directional and Bi-directional • Glass passiv

SMD Transient Voltage Suppressor

600W Surface Mount Transient Voltage Suppressors- 5.0V - 440V

600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features 600W Peak Pulse Power Dissipation 5.0V - 170V Standoff Voltages Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material - UL Flammability Classification Rating 94V-0

600W SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR

FEATURES * For surface mounted applications in order to optimize board space * Low profile package * Built-in strain relief * Glass passivated junction * Low inductance * Excellent clamping capability * Repetition Rate(duty cycle):0.01 * Fast response time: typically less than 1.0ps from 0

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

600W Surface Mount Transient Voltage Suppressors

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4-2 ESD 30KV(Ai

600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features 600W Peak Pulse Power Dissipation 5.0V - 170V Standoff Voltages Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material - UL Flammability Classification Rating 94V-0

600 Watts Surface Mount Transient Voltage Suppressor

Features ✧ For surface mounted application ✧ Low profile package ✧ Built-in strain relief ✧ Glass passivated junction ✧ Excellent clamping capability ✧ Fast response time: Typically less than 1.0ps from 0 volt to BV min. ✧ Typical IR less than 1μA above 10V ✧ High temperature soldering

GLASS PASSIVATED SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage - 5.0 to 440Volts Peak Pulse Power-600 Watts FEATURES * Glass passivated chip * 600 W peak pulse power capability with a 10/1000 µs wavefrom, repetitive rate (duty cycle) : 0.01 * Low leakage * Excellent clamping capability * Very fast response time

Transient Voltage Suppressors

Features 1. Halogen-free 2. Rohs compliant 3. Typical maximum temperature coefficient 4. ΔVBR = 0.1 xVBR@25°C x ΔT 5. Glass passivated Chip junction in DO-214AA package 6. 600W peak pulse capadility at 10×1000μs waveform, repetition rate(duty cycles):0.01 7. Fast response time:typically les

600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features ✧ For surface mounted application ✧ Low profile package ✧ Built-in strain relief ✧ Glass passivated junction ✧ Excellent clamping capability ✧ Fast response time: Typically less than 1.0ps from 0 volt to BV min. ✧ Typical IR less than 1μA above 10V ✧ High temperature soldering

600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features 600W Peak Pulse Power Dissipation 5.0V - 170V Standoff Voltages Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material - UL Flammability Classification Rating 94V-0

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Transil

Description The SMBJ Transil series has been designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, and MIL STD 883, method 3015, and electrical over stress according to IEC 61000-4-4 and 5. These devices are more generally used against surges below 6

600Watts Surface Mount Transient Voltage Suppressor

Features ✧ For surface mounted application ✧ Low profile package ✧ Built-in strain relief ✧ Glass passivated junction ✧ Excellent clamping capability ✧ Fast response time: Typically less than 1.0ps from 0 volt to BV min. ✧ Typical IR less than 1μA above 10V ✧ High temperature soldering

600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features 600W Peak Pulse Power Dissipation 5.0V - 170V Standoff Voltages Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material - UL Flammability Classification Rating 94V-0

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR STAND-OFF VOLTAGE - 5.0 TO 440 Volts

Stand-Off Voltage - 5.0 to 440 Volts 600 Watt Peak Pulse Power Features ● For surface mounted applications in order to optimize board space ● Low profile package ● Built-in strain relief ● Glass passivated junction ● Low inductance ● Excellent clamping capability ● Repetition Rate (duty cy

Transient Voltage Suppressors

FEATURES ◇ For surface mounted applications in order to optimize board space. ◇ Low profile package. ◇ Built-in strain relief. ◇ Glass passivated junction. ◇ Low inductance. ◇ Excellent clamping capability. ◇ Repetition Rate (duty cycle): 0.01. ◇ Fast response time: typical

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features 600W Peak Pulse Power Dissipation 5.0V - 170V Standoff Voltages Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material - UL Flammability Classification Rating 94V-0

600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features 600W Peak Pulse Power Dissipation 5.0V - 170V Standoff Voltages Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material - UL Flammability Classification Rating 94V-0

SAMYANG ELECTRONICS

600 Watt Peak Power Dimension

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

FEATURES  For surface mounted applications in order to optimize board space  Typical maximum temperature coefficient △VBR=0.1xVBR@25°C x△T  Low profile package  Built-in strain relief  Glass passivated junction  Excellent clamping capability  Repetition Rate (duty cycle):0.01  Fast

TRANSIENT VOLTAGE SUPPRESSOR

Features · For surface mounted applications in order to optimize board space · Low profile space · Very fast response time · Low inductance · Excellent clamping capability · 600W peak pulse power capability with a 10/1000 μs waveform · Meets MSL level 1, per J-STD-020 · Component in acco

5V-188V 600W

FEATURES Low profile package Ideal for automated placement Glass passivated chip junction Available in uni-directional and bi-directional 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 Excellent clamping capability Very fast response time

3.3 To 440V 600W Surface Mount Transient Voltage Suppressors (TVS)

Features For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability Typical IR less than 1μA above 10V 600W Peak power capability at 10 × 1000μs waveform Repetition rate

Surface Mount Transient Voltage Suppressors

Features Excellent clamping capability Low leakage current Low capacitance High surge capability Glass passivated chip Epoxy resin package Built-in strain relief Will not fatigue RoHS Compliant Fast response time: typically less than 1.0ps from 0 Volts to VBR min Applications Teleco

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODE

Features Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material: UL Flammability Classification Rating 94V-0

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.0V- 200V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O “-A” is an AEC-Q101 qualified de

Surface mount transient voltage suppressor power 600 watts

FEATURES • For surface mounted applications in order to optimize board space. • Low profile package • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Flammability

TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER

DESCRIPTION The SMBJ series support both Uni and Bi direction. FEATURES  Availabl e in SM B P ackage

600W Surface Mount Transient Voltage Suppressors

Features o Peak power disspation 600W@10 x 1000 us Pluse o Low incremental surge resistance. « Excellent clamping capability « Fast response time o Low leakage current « Halogen free and RoHS compliant

Transient Voltage Suppressors (TVS) Data Sheet

Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent clamping capability 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% Fast

1-Line ESD Protection

Description SMBJXXCA are designed to protect sensitive electronics from damage or latch-up due to EOS, lightning, CDE, and ESD. They feature large cross-sectional area junctions for conducting high transient currents. These devices offer desirable characteristics for board level protection i

600W 5V TVS transient suppressor diode

文件：464.986 Kbytes Page：5 Pages

Transient Voltage Suppressor 5.0 to 440 Volts 600 Watt

文件：323.02 Kbytes Page：9 Pages

SMBJ Transient Voltage Suppressor Diode Series

文件：409.87 Kbytes Page：5 Pages

TRANSIENT VOLTAGE SUPPRESSOR

文件：133.56 Kbytes Page：4 Pages

SMCJ Transient Voltage Suppressor Diode Series

文件：359.53 Kbytes Page：5 Pages

Transient Voltage Suppressor 5.0 to 440 Volts 600 Watt

文件：202.89 Kbytes Page：9 Pages

SMBJ Transient Voltage Suppressor Diode Series

文件：360.38 Kbytes Page：5 Pages

600W Transient Voltage Suppressors

文件：442.58 Kbytes Page：6 Pages

600W Transient Voltage Suppressor

文件：1.02372 Mbytes Page：6 Pages

Surface Mount Unidirectional and Bidirectional Transient Voltage Suppressors

文件：565.78 Kbytes Page：4 Pages

600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

文件：80.77 Kbytes Page：4 Pages