Transient Voltage Suppressor 5.0 to 170 Volts 600 Watt

Features ● For surface mount applications in order to optimize board space ● Low profile package ● Fast response time: typical less than 1.0ps from 0 volts to VBR minimum ● Low inductance ● Excellent clamping capability

UNI- AMD BI-DIRECTIONAL SURFACE MOUNT

FEATURES • LOW PROFILE PACKAGE FOR SURFACE MOUNTING • VOLTAGE RANGE: 5.0 TO 170 VOLTS • 600 WATTS PEAK POWER • UNIDIRECTIONAL AND BIDIRECTIONAL • LOW INDUCATANCE

DEVICES FOR BIPOLAR APPLICATIONS

Features • Glass passivated junction. • 600W Peak Pulse Power capability on 10/1000 µs waveform. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical

Silicon Avalanche Diodes - 600W Surface Mount Transient Voltage Suppressors

Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus and other integrated circuits. FEATURES • Stand-off Voltage Range 5.0 to 170 Volts • Uni-directional and Bi-directional • Glass passiv

Silicon Avalanche Diodes - 600W Surface Mount Transient Voltage Supressors

Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus and other integrated circuits. FEATURES • Stand-off Voltage Range 5.0 to 170 Volts • Uni-directional and Bi-directional • Glass passiv

600W Surface Mount Transient Voltage Suppressors

Peak Pulse Power 600 Watt Stand-off Voltage 5.0 To 170 VOLTS Feature: * 600 Watt Peak Power Dissipation * Glass Passivated Die Construction * Excellent Clamping Capability Fast Response Time * Plastic Material Has UL Flammability Classification Rating 94V-O

Surface Mount Transient Voltage Suppressor

Features ◇ For surface mounted application ◇ Low profile package ◇ Built-in strain relief ◇ Glass passivated junction ◇ Excellent clamping capability ◇ Fast response time: Typically less than 1.0ps from 0 volt to BV min ◇ Typical IR less than 1uA above 10V ◇ High temperature soldering guar

600W Surface Mount Transient Voltage Suppressor

600W Surface Mount Transient Voltage Suppressor Features • Stand-off voltage from 5.0 to 170 volts • 600W Peak Pulse Power capability on 10/1000 µs waveform repetition rate(duty cycle): 0.01 • Fast response time: typically less than 1.0ps from 0v to VBR • Low incremental surge resistance, exc

5.0V to 170V SMD TRANSIENT VOLTAGE SUPPRESSORS

Features ■ 600 WATT PEAK POWER PROTECTION ■ EXCELLENT CLAMPING CAPABILITY ■ FAST RESPONSE TIME ■ TYPICAL IR

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 5.0 to 170 Volts 600 Watts Peak Power FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High tem

POWER 600Watts VOLTAGE 5.0 to 188 Volts

Features • Underwriters Laboratory recognition under UL standard for safety 497B : Isolated loop curcuit protection • Low profile package with built-in strain relief for surface mounted applications • Glass passivated junction • Low incremental surge resistance, excellent clamping capability

Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast r

SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 600 Watts FEATURES ● Rating to 200V VBR ● For surface mounted applications ● Reliable low cost construction utilizing molded plastic technique ● Plastic material has UL recognition 94V-0 ● Typical IR less than 1µA above 10V ● Fast resp

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-5.0 TO 440 Volts 600 Watt Peak Pulse Power FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition rate (duty cycle):0.01 •

SURFACE MOUNT TRANSIERT VOLTAGE SUPPRESSOR

■ Features ● PPP 600W ● VBR 5.0V-440V ■ Applications ● Clamping Voltage

Surface Mount Transient Voltage Suppressors

Peak Pulse Power 600W Stand-off Voltage 5.0 to 440V Features • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Low profile package with built-in strain relief for surface mounted applications • Glass passivated junction • Low incremental surge resis

Transient Voltage Suppression Diodes

Transient Voltage Suppressors

PRODUCT SUMMARY Stand-off Voltage ratings from 5.0V to 440V Peak pulse power 600W in SMB surface-mount package FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Low profile package with built-in strain relief for surface-mount • G

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 5.0 to 440 Volts Peak Pulse Power - 600 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Plastic Case Material has UL Flammability Classification Rating 94V-O ● Typical IR less than 1μA abov

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 5.0 to 440 Volts Peak Pulse Power - 600 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Plastic Case Material has UL Flammability Classification Rating 94V-O ● Typical IR less than 1μA abov

TECHNICAL SPECIFICATIONS OF SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE RANGE - 5.0 to 170 Volts PEAK PULSE POWER - 600 Watts FEATURES * Ideal for surface mounted applications * 400 Watts Peak Pulse Power capability on 10/1000 µs waveform * Excellent clamping capability * Low zener impedance * Fast response time * Glass passivated junction

600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features • 600W Peak Pulse Power Dissipation • 5.0V to 200V Standoff Voltages • Glass Passivated Die Construction • Uni- and Bi-Directional Versions Available • Excellent Clamping Capability • Lead-Free Finish; RoHS Compliant (Notes 1 & 2) • Halogen and Antimony Free. “Green” Device (No

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage : 5.0 to 188V Peak Pulse Power : 600 W FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low inductance * Response Time Typically

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

PEAK PULSE POWER 600 WATTS REVERSE VOLTAGE 6.8 to 520 Volts FEATURES • Glass passivated chip • 600W peak pulse power capability woth a 10/1000μs waveform, repetitive rate (duty cycle):0.01 • Low leakage • Uni and Bidirectional unit • Excellent clamping capability • Very fast respon

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Breskdown voltage: 5.0-170 Volts Peak pulse power: 600 Wallts FEATURE ◆ Optimzed for LAN protection applications ◆ Ideal for ESD protection of data lines in accordance with IEC 1000-4-2(IEC801-2) ◆ Ideal for EFT protection of data lines in accordance with IEC1000-4-4(IEC801-2) ◆ Plastic packa

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE RANGE 50 to 170 Volts CURRENT 600 Watts Peak Power Features * For surface mounted application * Low profile package * Built-in strain relief * Glass passivated junction * Excellent clamping capability * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical

SURFACE MOUNT 600 Watt Transient Voltage Suppressor

DESCRIPTION This SMBJ5.0-170A or SMBG5.0-170A series of surface mount 600 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available in J-bend design (SMBJ) with the DO-214AA package for greater PC board mounting dens

TRANSIENT VOLTAGE SUPPRESSOR

FEATURES ● Glass passivated junction ● Low incremental surge resistance, excellent clamping capability ● Low profile package with built-in strain relief for surface mounted applications ● 600W peak pulse power capability with a 10/1000μs Wave form, repetition rate (duty cycle): 0.01 ● Ver

TRANSIENT VOLTAGE SUPPRESSORS

Description • Devices for bidirectional applications • For bidirectional use C or CA suffix for types SMBJ5.0 thru types SMBJ170A (e.g. SMBJ5.0C, SMBJ170CA) • Electrical characteristics apply in both directions Features • Plastic package has Underwriters Laboratory Flammability Classification

Surface Mount TRANSZORB Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast r

Transient Voltage Suppressors SMBJ5V0(C)A - SMBJ170(C)A

Features • Glass passivated junction. • 600W Peak Pulse Power capability on 10/1000 µs waveform. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical

Transil

Description The SMBJ Transil series has been designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, and MIL STD 883, method 3015, and electrical over stress according to IEC 61000-4-4 and 5. These devices are more generally used against surges below 6

Transient Voltage Suppressors

FEATURES ◇ For surface mounted applications in order to optimize board space. ◇ Low profile package. ◇ Built-in strain relief. ◇ Glass passivated junction. ◇ Low inductance. ◇ Excellent clamping capability. ◇ Repetition Rate (duty cycle): 0.01. ◇ Fast response time: typical

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage: 5.0-440 Volts Peak pulse power: 600 Watts FEATURE ♦ For surface mounted applications in order to optimize board space ♦ Low profile package ♦ Built-in strain relief ♦ Glass passivated junction ♦ Low inductance ♦ Excellent clamping capability ♦ 600W peak

600Watts Surface Mount Transient Voltage Suppressor

Features ✧ For surface mounted application ✧ Low profile package ✧ Built-in strain relief ✧ Glass passivated junction ✧ Excellent clamping capability ✧ Fast response time: Typically less than 1.0ps from 0 volt to BV min. ✧ Typical IR less than 1μA above 10V ✧ High temperature soldering

GLASS PASSIVATED SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage - 5.0 to 440Volts Peak Pulse Power-600 Watts FEATURES * Glass passivated chip * 600 W peak pulse power capability with a 10/1000 µs wavefrom, repetitive rate (duty cycle) : 0.01 * Low leakage * Excellent clamping capability * Very fast response time

600W SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR

FEATURES * For surface mounted applications in order to optimize board space * Low profile package * Built-in strain relief * Glass passivated junction * Low inductance * Excellent clamping capability * Repetition Rate(duty cycle):0.01 * Fast response time: typically less than 1.0ps from 0

Transient Voltage Suppressor

DESCRIPTION This SMBJ5.0-170A or SMBG5.0-170A series of surface mount 600 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available in J-bend design (SMBJ) with the DO-214AA package for greater PC board mounting dens

Surface Mount TRANSZORB Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast r

SURFACE MOUNT 600 Watt Transient Voltage Suppressor

DESCRIPTION This SMBJ5.0-170A or SMBG5.0-170A series of surface mount 600 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available in J-bend design (SMBJ) with the DO-214AA package for greater PC board mounting dens

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount TRANSZORB Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast r

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

SURFACE MOUNT 600 Watt Transient Voltage Suppressor

DESCRIPTION This SMBJ5.0-170A or SMBG5.0-170A series of surface mount 600 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available in J-bend design (SMBJ) with the DO-214AA package for greater PC board mounting dens

Surface Mount TRANSZORB Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast r

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

SURFACE MOUNT 600 Watt Transient Voltage Suppressor

DESCRIPTION This SMBJ5.0-170A or SMBG5.0-170A series of surface mount 600 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available in J-bend design (SMBJ) with the DO-214AA package for greater PC board mounting dens

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

TRANSIENT VOLTAGE SUPPRESSORS

Features ● For surface mounted applications in order to optimize board space ● Low profile space ● Glass passivated chip ● Low inductance ● Excellent clamping capability ● Very fast response time ● Typical ID less than 1µA at VWM ● 600W peak pulse power capability with a 10/1000 µs wavefor

SURFACE MOUNT 600W TVS

SURFACE MOUNT 600W TVS

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space

Surface Mount TRANSZORB Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast r

Surface Mount TRANSZORB Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast r

SMD Transient Voltage Suppressor

600W Surface Mount Transient Voltage Suppressors- 5.0V - 440V

Surface Mount Transient Voltage Suppressors (TVS)

SMBJ Series 5.0 To 440 V 600W Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ For surface mounted applications in order to optimize board space