接近传感器

串联驱动-单线归零码(SID)

SM18703APB是单线传输三通道LED驱动控制专用芯片，采用单线归零码数据协议。SM18703APB支持宽范围供电，支持尾端欠压防抖。高电流精度，混光无色差。OUT R/G/B端口默认输出电流17mA。具有断点检测功能，便于生产测试。应用具备芯片外围元器件少、简单可靠的特点。 支持电压5~36V应用\n采用单线归零码数据协议\nOUT R/G/B恒流值默认17mA\nOUT R/G/B上电默认状态：关闭\nOUT R/G/B端口耐压>44V\nDIN/DOUT端口耐压>50V\n支持尾端欠压防抖\n电流精度±5%\n具备断点续传功能\n具备断点检测功能\nOUT R/G/B输出灰度等级：256级\n同一帧显示数据同步刷新\n数据串行级联传输，抗干扰能力强\n信号传输速率：800Kbps\n封装形式：SOP8;

串联驱动-单线归零码(SID)

单线传输三通道LED驱动控制专用芯片，采用单线归零码SID数据协议。 支持电压 5~36V 应用\n采用单线归零码数据协议\nOUTR/G/B恒流值默认17mA\n电流精度±5%\nOUTR/G/B上电默认状态：开启 50%\nOUTR/G/B端口耐压>44V\nDIN/DOUT端口耐压>50V\n支持尾端欠压防抖\nOUT R/G/B输出灰度等级:256级\n同一帧显示数据同步刷新\n数据串行级联传输，抗干扰能力强\n信号传输速率：800Kbps;

CRYSTAL CLOCK OSCILLATORS Positive ECL (PECL) - Enable/Disable

Description The HS-1870 Series of quartz crystal oscillators provide MECL 10K and 10KH series compatible signals in industry standard four-pin DIP hermetic packages. Systems designers may now specify space-saving, cost-effective packaged PECL oscillators to meet their timing requirements. This

High-Speed Drivers with JFET Switch

Analog Switches with Dviver

Silicon Epitaxial Planar PIN Diode for High Frequency Attenuator

Features • Low forward resistance. (rf = 5.5 max) • MPAK package is suitable for high density surface mounting and high speed assembly.

Array LED 2 mm LED, Diffused

Features ● colored, diffused package ● for use as optical indicator ● available as multiple array (LED) ● load dump resistant acc. to DIN 40839

Silicon Complementary Transistors Medium Power Audio Amplifier

Features: • 5W Output in Complementary Pair

TRISILTM

DESCRIPTION The SMTPBxx series has been designedto protect telecommunication equipment against lightning and transient induced by AC power lines. FEATURES BIDIRECTIONAL CROWBAR PROTECTION. BREAKDOWNVOLTAGE RANGE: From 62 V To 270 V. HOLDING CURRENT: IH= 150 mA min REPETITIVE PE