High Speed Differential 3:1 Analog Multiplexer

The SGM7232 is a differential 3:1 analog multiplexer switch which operates from a single supply in the range of 2.7V to 4.3V. It can be used to multiplex between general signals and high-speed differential data signals.\n\n The SGM7232 is available in a Green UTQFN-2.2×1.4-12L package. It opera • Low Distortion High Speed Analog Switches\n• Power OFF Protection\n• Short Protection between COM+/COM- and VCC\n• Crosstalk: -90dB at 100kHz\n• Off-Isolation: -90dB at 100kHz\n• Single Supply Operation: 2.7V to 4.3V\n• Internal 5MΩ Pull-Down Resistors at C0, C1 Pins\n• Available in a Green UTQFN-;

0.4GHz to 3.8GHz DPDT Switch

The SGM72322A is a double-pole/double-throw (DPDT) switch, which supports from 0.4GHz to 3.8GHz. The device features low insertion loss and high isolation, which make it suitable for high linearity and 2G/3G/4G applications.\nThe SGM72322A has the ability to integrate DPDT RF switch and GPIO control • Operating Frequency Range: 0.4GHz to 3.8GHz\n\n• Supply Voltage Range: 1.7V to 3.3V\n\n• Low Insertion Loss\n\n• High Isolation\n\n• Advanced Silicon-On-Insulator (SOI) Process\n\n• Single Control Voltage Input\n\n• GSM Power Handling\n\n• No External DC Blocking Capacitors Required\n\n• Available;

5G Switch

T-1 Subminiature Lamps

T-1 Subminiature Lamps T-1 Subminiature Short Type Lamps

Color TV Signal Encoder

The BA7232FS converts analog RGB signals into color TV signals in the NTSC and PAL formats. From inputs ofanalog RGB signals, a composite synch signal, burst pulses and a color carrier, this IC generates a color TV signal, and can be adapted for either NTSC or PAL standards, which are selected ext

Dual Channel, High Speed, High Current Line Driver w/3-State

General Description The EL7232C 3-state drivers are particularly well suited for ATE and microprocessor based applications. The low quiescent power dissipation makes this part attractive in battery applications. The 2A peak drive capability, makes the EL7232C an excellent choice when driving high

Dual Channel, High Speed, High Current Line Driver w/3-State

General Description The EL7232C 3-state drivers are particularly well suited for ATE and microprocessor based applications. The low quiescent power dissipation makes this part attractive in battery applications. The 2A peak drive capability, makes the EL7232C an excellent choice when driving high

FULL LAYER-??ISO/IEC 11172-3 AUDIO DECODER

FULL LAYER-III ISO/IEC 11172-3 AUDIO DECODER