IR-Lumineszenzdiode (880 nm) im TO-46-Geh채use

Features • Fabricated in a liquid phase epitaxy process • Anode is electrically connected to the case • High reliability • Matches all Si-Photodetectors • Hermetically sealed package Applications • Photointerrupters • IR remote control • Sensor technology

IR-Lumineszenzdiode (880 nm) im TO-46-Geh채use

Features • Fabricated in a liquid phase epitaxy process • Anode is electrically connected to the case • High reliability • Matches all Si-Photodetectors • Hermetically sealed package Applications • Photointerrupters • IR remote control • Sensor technology

Pulsed Laser Diode in Plastic Package 10 W Peak Class 3 Laser Product

Features • Low cost plastic package • Reliable strained InGaAs/GaAs material • High power large-optical-cavity structure • Single emitting area 200 µm × 2 µm Applications • Range finding • Security, surveillance • Illumination, ignition • Testing and measurement

Pulsed Laser Diode in Plastic Package 10 W Peak Class 3 Laser Product

ROUND INSTRUMENTATION HANDLES

[KEYSTONE] ROUND INSTRUMENTATION HANDLES FERRULES HANDLE MOUNTING SCREWS

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488 and ADM489 are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both Electronics Industries Association (EIA) RS-485 and RS-422 standards. Bo

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488A and ADM489A are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both RS-485 and RS-422 standards of the Electronics Industries Association (E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Complies with ANSI TIA/EIA-485-A-1998 and ISO 8482: 1987(E) 250 kbps data rate ±4 kV HBM ESD protection on all pins Single 5 V ± 10 supply −7 V to +12 V bus common-mode range Connect up to 32 nodes on the bus Reduced slew rate for low EM interference Short-circuit protection 30 μA supp