Dual-Interface XGA TFT LCD Display Controller

[SmartASIC, Inc.] The SD1010 is enhanced version of the SD1000 chip. It is an IC designed for dual interface XGA TFT LCD monitors. A dual-interface LCD monitor takes analog or digital RGB signals from a graphic card of a personal computer, the exact same input interface as a convent

40V/2A，可调频率，降压转换器 SD1010

SD1010是一款输入耐压超过50V，在4.5V~40V输入电压条件下正常工作，并且能够实现精确恒压输出的开关型降压稳压器。SD1010提供固定输出电压版本，包括：3.3V，5V，12V，以及可调整输出的型号：输出电压范围为1.23V~40V；SD1010能驱动2A的负载，有优异的线性和负载调整能力。SD1010的效率比流行的三端线性稳压器要高得多，是理想的替代方案，不需要外加散热片。SD1010的工作频率可由外部电阻设置，范围是150KHz~1.5MHz。SD1010无需外部补偿，可以依靠自身内置稳定环路实现恒流以及恒压控制，外部仅需4个元件即可构成完整的降压系统，使用简便。SD1010具备 • 4.5V~40V工作电压范围\n• 输入耐压高达50V\n• 提供3.3V，5V，12V，ADJ输出电压版本\n• 2A连续输出电流\n• 高达93%的输出效率\n• 150KHz~1.5MHz可调开关频率\n• 内置软启动\n• 支持99%占空比\n• 无需外部补偿\n• ±1.5%输出精度\n• 短路保护(SCP)\n• 欠压保护(UVLO)\n• 过流保护(OCP)\n• 过压保护(OVP)\n• 过热保护(OTP)\n• SOT23-6L封装形式;

Discrete Diodes

文件：225.63 Kbytes Page：2 Pages

包装：散装 描述：VARIABLE TRANSFORMER 140V 10A 测试与计量 设备 - 可调变压器

包装：散装 描述：VARIABLE TRANSFORMER 140V 10A 测试与计量 设备 - 可调变压器

TECHNICAL SPECIFICATIONS OF SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE - 20 to 100 Volts

VOLTAGE RANGE - 20 to 100 Volts CURRENT - 10 Amperes FEATURES * Metal to silicon rectifier majority carrier conduction * Low power loss, High efficiency * High current capability * Low forward voltage drop * High surge capacity * For use in low voltage high frequency inverte

DPAK SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

VOLTAGE - 20 to 100 Volts CURRENT - 10.0 AmperesFEATURES\n• Plastic package has Underwriters Laboratory Flammability Classification 94V-O\n• For surface mounted applications\n• Low profile package\n• Built-in strain relief\n• Metal to silicon rectifier majority carrier conduction\n• Low power loss, • Plastic package has Underwriters Laboratory Flammability Classification 94V-O\n• For surface mounted applications\n• Low profile package\n• Built-in strain relief\n• Metal to silicon rectifier majority carrier conduction\n• Low power loss, High efficiency\n• High current capability, low VF\n• High;

DPAK SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER(VOLTAGE - 20 to 100 Volts CURRENT - 10.0 Amperes)

VOLTAGE - 20 to 100 Volts CURRENT - 10.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Low profile package • Built-in strain relief • Metal to silicon rectifier majority carrier conduction

10A DPAK SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

Features Schottky Barrier Chip Guard Ring Die Construction for Transient Protection High Current Capability Low Power Loss, High Efficiency High Surge Current Capability For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications

SCHOTTKY BARRIER RECTIFIER(VOLTAGE - 20 to 100 Volts CURRENT - 10.0 Amperes)

VOLTAGE - 20 to 1 00 Volts CURRENT - 10 .0 Amperes FEATURES • Plastic package has Underwriters Laboratory Fl ammability Classification 9 4V-O • For thorough hole applications • Low profile package • Built- in strain relief • Metal to silicon rectifier majority carr

DPAK SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER(VOLTAGE - 20 to 100 Volts CURRENT - 10.0 Amperes)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Low profile package • Built-in strain relief • Low power loss, High efficiency • High surge capacity • For use in low voltage high frequency inverters, free wheeling

10A DPAK SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

Features ● Schottky Barrier Chip ● Guard Ring Die Construction for Transient Protection ● High Current Capability ● Low Power Loss, High Efficiency ● High Surge Current Capability ● For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications

SCHOTTKY BARRIER RECTIFIER(VOLTAGE - 20 to 100 Volts CURRENT - 10.0 Amperes)

VOLTAGE - 20 to 100 Volts CURRENT - 10.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For thorough hole applications • Low profile package • Built-in strain relief • Metal to silicon rectifier majority carrier conduction

DPAK SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

VOLTAGE 20 to 150 Volts CURRENT 10.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Low profile package • Built-in strain relief • Low power loss, High efficiency • High surge capacity

SCHOTTKY BARRIER RECTIFIERS

VOLTAGE 20 to 150 Volts CURRENT 10.0 AmperesFEATURES\n• Plastic package has Underwriters Laboratory Flammability Classification 94V-O\n• For surface mounted applications\n• Low profile package\n• Built-in strain relief\n• Low power loss, High efficiency\n• High surge capacity\n• For use in low volta • Plastic package has Underwriters Laboratory Flammability Classification 94V-O\n• For surface mounted applications\n• Low profile package\n• Built-in strain relief\n• Low power loss, High efficiency\n• High surge capacity\n• For use in low voltage high frequency inverters, free wheeling, and polari;

10A DPAK SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

Features Schottky Barrier chip Guard Ring Die Construction Low Profile Package High Surge Current Capability Low Power Loss, High Efficiency Ideal for Printed Circuit Board For Use in Low Voltage, High Frequency Inverters, Free Wheeling Applications

SCHOTTKY BARRIER RECTIFIER(VOLTAGE - 20 to 100 Volts CURRENT - 10.0 Amperes)

VOLTAGE - 20 to 100 Volts CURRENT - 10.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For thorough hole applications • Low profile package • Built-in strain relief • Metal to silicon rectifier majority carrier conduction

Analog-Interface XGA TFT LCD Display Controller

[SmartASIC, Inc.] OVERVIEW The SD1010A is enhanced version of the SD1000 chip. It is an IC designed for analog-interface XGA TFT LCD monitors. An analog-interface LCD monitor takes analog RGB signals from a graphic card of a personal computer, the exact same input interface as a conventional CRT

Analog-Interface XGA TFT LCD Display Controller

[SmartASIC, Inc.] OVERVIEW The SD1010A is enhanced version of the SD1000 chip. It is an IC designed for analog-interface XGA TFT LCD monitors. An analog-interface LCD monitor takes analog RGB signals from a graphic card of a personal computer, the exact same input interface as a conventional CRT

Analog-Interface XGA TFT LCD Display Controller

[SmartASIC, Inc.] OVERVIEW The SD1010A is enhanced version of the SD1000 chip. It is an IC designed for analog-interface XGA TFT LCD monitors. An analog-interface LCD monitor takes analog RGB signals from a graphic card of a personal computer, the exact same input interface as a conventional CRT

Digital Interface VGA TFT LCD Display Controller

[SmartASIC, Inc.] OVERVIEW The SD1010D is enhanced version of the SD1000 chip. It is an IC designed for digital-interface XGA TFT LCD monitors. A digital-interface LCD monitor takes digital RGB signals from a graphic card of a personal computer, the exact same input interface as a conventional C

TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SCHOTTKY BARRIER DIODE VOLTAGE RANGE - 20 to 100 Volts

VOLTAGE RANGE - 20 to 100 Volts CURRENT - 10 Amperes FEATURES * Metal to silicon rectifier majority carrier conduction * Low power loss, High efficiency * High current capability * Low forward voltage drop * High surge capacity * For use in low voltage high frequency inverters, free wheeli

Digital Interface VGA TFT LCD Display Controller

[SmartASIC, Inc.] OVERVIEW The SD1010D is enhanced version of the SD1000 chip. It is an IC designed for digital-interface XGA TFT LCD monitors. A digital-interface LCD monitor takes digital RGB signals from a graphic card of a personal computer, the exact same input interface as a conventional C

Digital Interface VGA TFT LCD Display Controller

[SmartASIC, Inc.] OVERVIEW The SD1010D is enhanced version of the SD1000 chip. It is an IC designed for digital-interface XGA TFT LCD monitors. A digital-interface LCD monitor takes digital RGB signals from a graphic card of a personal computer, the exact same input interface as a conventional C

Digital Interface VGA TFT LCD Display Controller

[SmartASIC, Inc.] OVERVIEW The SD1010D is enhanced version of the SD1000 chip. It is an IC designed for digital-interface XGA TFT LCD monitors. A digital-interface LCD monitor takes digital RGB signals from a graphic card of a personal computer, the exact same input interface as a conventional C

SCHOTTKY BARRIER RECTIFIERS

文件：426.65 Kbytes Page：2 Pages

SCHOTTKY BARRIER RECTIFIERS

文件：426.99 Kbytes Page：2 Pages

SCHOTTKY BARRIER RECTIFIERS

文件：426.95 Kbytes Page：2 Pages

SCHOTTKY BARRIER RECTIFIERS

文件：427.03 Kbytes Page：2 Pages

SCHOTTKY BARRIER RECTIFIERS

文件：426.2 Kbytes Page：2 Pages

SCHOTTKY BARRIER RECTIFIERS

文件：426.23 Kbytes Page：2 Pages

1.0 AMPERE SILICON MINIATURE SINGLE- PHASE BRIDGES(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Amperes)

VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Amperes FEATURES • Ratings to 1000V PRV • Surge overload rating: 30 Amperes peak • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • Mounting position:Any

DUAL-IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0~1.5 Amperes)

VOLTAGE - 50 to 1000 Volts CURRENT - 1.0~1.5 Amperes FEATURES ● Plastic material used carries Underwriters Laboratory recognition 94V-O ● Low leakage ● Surge overload rating— 30~50 amperes peak ● Ideal for printed circuit board ● Exceeds environmental standards of MIL-S-19500/228

FAST SWITCHING PLASTIC DIODES(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

VOLTAGE 50 to 1000 Volts CURRENT 1.0 Amperes FEATURES • High current capability. • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. • Low leakage. • Exceeds environmental standards of MIL-S-

ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

ULTRAFAST RECOVERY RECTIFIER VOLTAGE 50 to 1000 Volts CURRENT 1.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound • Exceeds environmental standards of MIL-S-19500/228. • Ultra Fast switchin

GaAs N-Channel MES IC

文件：39.03 Kbytes Page：2 Pages