Complete DDR1/2/3 Memory Power Supply

Description The SC488 is a combination switching regulator and linear source/sink regulator intended for DDR1/2 memory systems. The purpose of the switching regulator is to generate the supply voltage, VDDQ, for the memory system. It is a pseudo-fixed frequency constant on-time controller desig

Complete DDR1/2/3 Memory Power Supply

Complete DDR1/2/3 Memory Power Supply

Description The SC488 is a combination switching regulator and linear source/sink regulator intended for DDR1/2 memory systems. The purpose of the switching regulator is to generate the supply voltage, VDDQ, for the memory system. It is a pseudo-fixed frequency constant on-time controller desig

ROUND INSTRUMENTATION HANDLES

[KEYSTONE] ROUND INSTRUMENTATION HANDLES FERRULES HANDLE MOUNTING SCREWS

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488 and ADM489 are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both Electronics Industries Association (EIA) RS-485 and RS-422 standards. Bo

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Complies with ANSI TIA/EIA-485-A-1998 and ISO 8482: 1987(E) 250 kbps data rate ±4 kV HBM ESD protection on all pins Single 5 V ± 10 supply −7 V to +12 V bus common-mode range Connect up to 32 nodes on the bus Reduced slew rate for low EM interference Short-circuit protection 30 μA supp

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488A and ADM489A are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both RS-485 and RS-422 standards of the Electronics Industries Association (E