Portable IMVP-IV??and IMVP4??Dual Phase Power Supply Controller

Description The SC450 PowerStep IV™ IC is a single chip high-performance Hysteretic PWM controller. With its integrated SmartDriver™, it powers advanced IMVP-IV™ and IMVP4+™ processors. Features ‹IMVP-IV™ and IMVP4+™compliant single chip solution ‹On chip CLK_ENABLE# and IMVP4_PWR

PowerStep IV® Portable IMVP-IV® and IMVP-IV+® Dual-Phase Power-Supply Controller

The complete datasheet for this product is restricted to IMVP licensees only. To request a datasheet, email: salesinfo@semtech.com. ·IMVP-IV™ and IMVP4+™ compliant single-chip solution\n·On-chip CLK_ENABLE# and IMVP4_PWRGD outputs\n·Backward compatible with SC1476\n·High-speed hysteretic controller\n·6-bit VID programmable output\n·Integrated drivers with soft high side turn-on\n·Programmable softstart\n·Programmable boot voltag;

Portable IMVP-IV and IMVP4 Dual Phase Power Supply Controller

文件：82.12 Kbytes Page：1 Pages

2Amp, 2MHz Step-Up Switching Regulator with Soft-Start

Description The SC4501 is a high-frequency current-mode step-up switching regulator with an integrated 2A power transis tor. Its high switching frequency (programmable up to 2MHz) allows the use of tiny surface-mount external pas sive components. Features Low saturation voltage sw

2Amp, 2MHz Step-Up Switching Regulator with Soft-Start

Description The SC4501 is a high-frequency current-mode step-up switching regulator with an integrated 2A power transis tor. Its high switching frequency (programmable up to 2MHz) allows the use of tiny surface-mount external pas sive components. Features Low saturation voltage sw

2Amp, 2MHz Step-Up Switching Regulator with Soft-Start

Description The SC4501 is a high-frequency current-mode step-up switching regulator with an integrated 2A power transis tor. Its high switching frequency (programmable up to 2MHz) allows the use of tiny surface-mount external pas sive components. Features Low saturation voltage sw

2Amp, 2MHz Step-Up Switching Regulator with Soft-Start

Description The SC4501 is a high-frequency current-mode step-up switching regulator with an integrated 2A power transis tor. Its high switching frequency (programmable up to 2MHz) allows the use of tiny surface-mount external pas sive components. Features Low saturation voltage sw

1.4Amp, 2MHz Step-Up Switching Regulator with Soft-Start

Description The SC4502/SC4502H is a high-frequency current-mode step-up switching regulator with an integrated 1.4A power transistor. Its high switching frequency (program mable up to 2MHz) allows the use of tiny surface-mount external passive components. Features ‹Low saturation

1.4 Amp, 2 MHz Boost Switching Regulator with Soft-Start

The SC4502 is a high-frequency current-mode step-up switching regulator with an integrated 1.4A power transistor. Its high switching frequency (programmable up to 2MHz) allows the use of tiny surface-mount external passive components. Programmable soft-start eliminates high inrush current during sta ·Low saturation voltage switch: 210mV (250mV for the SC4502H)\n·Constant switching frequency current-mode control\n·Programmable switching frequency up to 2 MHz\n·Soft start function\n·Input voltage range from 1.4 V to 16 V\n·Output voltage up to 32V (40V for the SC4502H)\n·Low shutdown current\n·Ad;

1.4Amp, 2MHz Step-Up Switching Regulator with Soft-Start

Description The SC4502/SC4502H is a high-frequency current-mode step-up switching regulator with an integrated 1.4A power transistor. Its high switching frequency (program mable up to 2MHz) allows the use of tiny surface-mount external passive components. Features ‹Low saturation

1.4Amp, 2MHz Step-Up Switching Regulator with Soft-Start

Description The SC4502/SC4502H is a high-frequency current-mode step-up switching regulator with an integrated 1.4A power transistor. Its high switching frequency (program mable up to 2MHz) allows the use of tiny surface-mount external passive components. Features ‹Low saturation

1.4 Amp, 2 MHz Boost Switching Regulator with Soft-Start

The SC4502H is a high-frequency current-mode step-up switching regulator with an integrated 1.4A power transistor. Its high switching frequency (programmable up to 2MHz) allows the use of tiny surface-mount external passive components. Programmable soft-start eliminates high inrush current during st ·Low saturation voltage switch: 250mV\n·Constant switching frequency current-mode control\n·Programmable switching frequency up to 2 MHz\n·Soft start function\n·Input voltage range from 1.4 V to 16 V\n·Output voltage up to 40V\n·Low shutdown current\n·Adjustable under-voltage lock-out threshold\n·Sm;

1.4Amp, 2MHz Step-Up Switching Regulator with Soft-Start

Description The SC4502/SC4502H is a high-frequency current-mode step-up switching regulator with an integrated 1.4A power transistor. Its high switching frequency (program mable up to 2MHz) allows the use of tiny surface-mount external passive components. Features ‹Low saturation

1.4Amp, 2MHz Step-Up Switching Regulator with Soft-Start

Description The SC4502/SC4502H is a high-frequency current-mode step-up switching regulator with an integrated 1.4A power transistor. Its high switching frequency (program mable up to 2MHz) allows the use of tiny surface-mount external passive components. Features ‹Low saturation

1.4Amp, 2MHz Step-Up Switching Regulator with Soft-Start

Description The SC4502/SC4502H is a high-frequency current-mode step-up switching regulator with an integrated 1.4A power transistor. Its high switching frequency (program mable up to 2MHz) allows the use of tiny surface-mount external passive components. Features ‹Low saturation

1.3MHz Step-Up Switching Regulator with 1.4A Switch

Description The SC4503 is a 1.3MHz current-mode step-up switching regulator with an integrated 1.4A power transistor. Its high switching frequency allows the use of tiny surface-mount external passive components. The SC4503 features a combined shutdown and soft-start pin. The optional soft-start

1.3MHz Step-Up Switching Regulator with 1.4A Switch

Description The SC4503 is a 1.3MHz current-mode step-up switching regulator with an integrated 1.4A power transistor. Its high switching frequency allows the use of tiny surface-mount external passive components. The SC4503 features a combined shutdown and soft-start pin. The optional soft-start

丝印代码：BH00；1.3MHz Step-Up Switching Regulator with 1.4A Switch

Description The SC4503 is a 1.3MHz current-mode step-up switching regulator with an integrated 1.4A power transistor. Its high switching frequency allows the use of tiny surface-mount external passive components. The SC4503 features a combined shutdown and soft-start pin. The optional soft-start

High Efficiency Boost Converter for Backlight/Flash LED Driver

Description The SC4505 is a high-frequency PWM current-mode step up switching regulator with an integrated 2A power transistor. Its high switching frequency (1MHz) allows the use of tiny surface-mount external passive components. The internal switch is rated at 36V which makes the converter ide

High Efficiency Boost Converter for Backlight/Flash LED Driver

Description The SC4505 is a high-frequency PWM current-mode step up switching regulator with an integrated 2A power transistor. Its high switching frequency (1MHz) allows the use of tiny surface-mount external passive components. The internal switch is rated at 36V which makes the converter ide

High Efficiency Boost Converter for Backlight/Flash LED Driver

Description The SC4505 is a high-frequency PWM current-mode step up switching regulator with an integrated 2A power transistor. Its high switching frequency (1MHz) allows the use of tiny surface-mount external passive components. The internal switch is rated at 36V which makes the converter ide

Buck or Buck-Boost(Inverting) Current Mode Controller

Description The SC4508 is a low voltage current mode switching regulator controller that drives a P-channel power MOSFET with programmable switching frequency. It can be configured in either buck or buck boost (inverting) convert ers. The converters can be operated from 2.7V to 15V input

Buck or Buck-Boost (Inverting) Current Mode Controller

Description The SC4508A is a low voltage current mode switching regulator controller that drives a P-channel power MOSFET with programmable switching frequency. It can be configured in either buck or buck boost (inverting) con verters. The converters can be operated from 2.7V to 15V input volta

Buck or Buck-Boost (Inverting) Current Mode Controller

Description The SC4508A is a low voltage current mode switching regulator controller that drives a P-channel power MOSFET with programmable switching frequency. It can be configured in either buck or buck boost (inverting) con verters. The converters can be operated from 2.7V to 15V input volta

Buck or Buck-Boost (Inverting) Current Mode Controller

Description The SC4508A is a low voltage current mode switching regulator controller that drives a P-channel power MOSFET with programmable switching frequency. It can be configured in either buck or buck boost (inverting) con verters. The converters can be operated from 2.7V to 15V input volta

Buck or Buck-Boost (Inverting) Current Mode Controller

Description The SC4508A is a low voltage current mode switching regulator controller that drives a P-channel power MOSFET with programmable switching frequency. It can be configured in either buck or buck boost (inverting) con verters. The converters can be operated from 2.7V to 15V input volta

Buck or Buck-Boost(Inverting) Current Mode Controller

Description The SC4508 is a low voltage current mode switching regulator controller that drives a P-channel power MOSFET with programmable switching frequency. It can be configured in either buck or buck boost (inverting) convert ers. The converters can be operated from 2.7V to 15V input

Highly Integrated Step-Up Converter for White LED Applications in MLPD-W8-2x2

Description The SC4509 is a highly integrated step-up DC/DC converter targeted for white LED backlighting applications. It is designed to drive up to five LEDs with a wide input voltage range of 2.7 to 10 volts. Designed for 20V output voltage, the SC4509 operates with a constant 1.2MHz PWM fre

Highly Integrated Step-Up Converter for White LED Applications in MLPD-W8-2x2

Description The SC4509 is a highly integrated step-up DC/DC converter targeted for white LED backlighting applications. It is designed to drive up to five LEDs with a wide input voltage range of 2.7 to 10 volts. Designed for 20V output voltage, the SC4509 operates with a constant 1.2MHz PWM fre

Highly Integrated Step-Up Converter for White LED Applications in MLPD-W8-2x2

Description The SC4509 is a highly integrated step-up DC/DC converter targeted for white LED backlighting applications. It is designed to drive up to five LEDs with a wide input voltage range of 2.7 to 10 volts. Designed for 20V output voltage, the SC4509 operates with a constant 1.2MHz PWM fre

Highly Integrated Step-Up Converter for White LED Applications in MLPD-W8-2x2

Description The SC4509 is a highly integrated step-up DC/DC converter targeted for white LED backlighting applications. It is designed to drive up to five LEDs with a wide input voltage range of 2.7 to 10 volts. Designed for 20V output voltage, the SC4509 operates with a constant 1.2MHz PWM fre

封装/外壳：10-VFDFN 裸露焊盘 功能：升压 包装：卷带（TR） 描述：IC REG BOOST ADJ 2A 10MLPD 集成电路（IC） 稳压器 - DC-DC 开关稳压器

封装/外壳：10-VFDFN 裸露焊盘 功能：升压 包装：管件 描述：IC REG BOOST ADJ 2A 10MLPD 集成电路（IC） DC DC 开关稳压器

丝印代码：E00；1.3MHz Step-Up Switching Regulator with 1.4A Switch

文件：1.18708 Mbytes Page：22 Pages

High Efficiency Boost Converter for Backlight/Flash LED Driver

文件：369.31 Kbytes Page：15 Pages

High Efficiency Boost Converter for Backlight/Flash LED Driver

文件：369.31 Kbytes Page：15 Pages

High Efficiency Boost Converter for Backlight/Flash LED Driver

文件：369.31 Kbytes Page：15 Pages

High Efficiency Boost Converter for Backlight/Flash LED Driver

文件：369.31 Kbytes Page：15 Pages

Portable IMVP-IV and IMVP4 Dual Phase Power Supply Controller

文件：82.12 Kbytes Page：1 Pages

APC Smart-UPS SC 450VA 120V - 1U Rackmount/Tower (Not for sale in CO, VT or WA)

文件：83.19 Kbytes Page：3 Pages

High Voltage Transistors

High Voltage Transistors PNP Silicon

PNP medium frequency transistor

DESCRIPTION PNP medium frequency transistor in a TO-92; SOT54 plastic package. FEATURES • Low current (max. 25 mA) • Low voltage (max. 40 V). APPLICATIONS • HF and IF stages in radio receivers • Mixer stages in AM receivers.

Single Supply, Low-Power, High Output, Current Feedback Amplifier

文件：203.25 Kbytes Page：12 Pages

Single Supply, Low-Power, High Output, Current Feedback Amplifier

文件：203.25 Kbytes Page：12 Pages

Square Type

文件：31.83 Kbytes Page：1 Pages