Low Capacitance TRANSZORB® Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • 500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Solder dip 275 °C max. 10 s, per JESD 22-B1

Low Capacitance TRANSZORB Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • 500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Materi

Transient Voltage Suppression Diodes

500W Low Capacitance Transient Voltage Suppressor

Features • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering information) • Glass Passivated Junction • Excellent Clamping Capability • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1 • UL Recognized File # E331408 • Halogen fre

LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE- 5.0 TO 50 Volts 500 Watt Peak Pulse Power FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated junction • 500W Peak Pulse Power capability on 10/1000 µs waveform • Glass passivated junction • Low incremental surge resistan

Low Capacitance Transient Voltage Suppressor Diodes

Voltage Range 5.0 to 50 Volts 500 Watts Peak Power 1.0 Watt Steady State Features ☆ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ☆ 500W surge capability at 10 X 1000us waveform, duty cycle: 0.01 ☆ Excellent clamping capability ☆ Low incremental surge re

Low Capacitance Tranient Voltage Suppressor

Peak Pulse Power 500 Watts Sand-off Voltage 5.0 to 50 Volts Feature: * Plastic package has underwriters laboratory Flammability classification 94V- 0. * Glass passivated junction. * 500w peak pulse power capability with a 10/100 us waveform Repetition rate(duty cycle):0.01 . *

500 Watts Axial Leaded Low Capacitance Transient Voltage Suppressor

Features ● 500W Peak Pulse Surge reverse capability on 10/1000ms waveform ● Excellent clamping capability ● Low incremental surge resistance ● Fast response time : typically less than 1.0 ns from 0 volts to BV

LOW CAPACITANCE 500W TRANSIENT VOLTAGE SUPPRESSORS

FEATURES UL 94V0 FLAME RETARDANT EPOXY MOLDING COMPOND DIFFUSED JUNCTION LOW COST LOW JUNCTION CAPACITANCE MECHANICAL DATA CASE: MOLDED PLASTIC, CASE: DO15, DIMENSIONS IN INCHES AND (MILLIMETERS) TERMINALS: AXIAL LEADS SOLDERABLE PER MIL-STD-202, METHOD 208 POLARITY: COLO

500W Low Capacitance Transient Voltage Suppressor

Features • Stand-off voltage from 5.0 to 50 volts • Glass passivated junction • Excellent clamping capability • Low incremental surge resistance • 400W peak pulse capability with a 10/1000us waveform, Repetition rate (duty cycle): 0.01 • Fast response time: typically less than 1.

Low Capacitance TransZorbTM TVS

Stand-off Voltage - 5.0 to 50 Volts Peak Pulse Power - 500 Watts Features ◇ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◇ Glass passivated junctions ◇ 500W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01 ◇ Ex

Glass Passivated Die Construction

Features ● Glass Passivated Die Construction ● 500W Peak Pulse Power Dissipation ● Uni-directional Versions Available ● Excellent Clamping Capability ● Fast Response Time Applications ● Communication Systems ● Power Supplies ● Medical Equipment ● Business Machines

LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR

FEATURES * 500W Peak Pulse Surge reverse capability on 10/1000ms waveform * Excellent clamping capability * Low incremental surge resistance * Fast response time : typically less than 1.0 ns from 0 volts to BV

Axial Lead Transient Voltage Suppressors (TVS)

Description The SAC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip ♦ 500W peak pulse power capability with a 10/1000µs waveform, repetitive rate (

5.0 To 50V 500W Low Capacitance Axial Lead Transient Voltage Suppressors (TVS)

Features Glass passivated junction 500W peak pulse power capability with a 10/1000 μ s waveform, repetitive rate (duty cycle):0.01 Low leakage Excellent clamping capability Very fast response time Plastic package has Underwriters Laboratory Flammability 94V-0 Halogen free and RoHS complia

Transient Voltage Suppressors

Features 1. Halogen-free 2. Rohs compliant 3. Typical maximum temperature coefficient 4. ΔVBR =0.1xVBR@25°C x ΔT 5. Glass passivated Chip junction in DO-15 package 6. 800W peak pulse capadility at 10x1000μs waveform,repetition rate (duty cycles):0.01 7. Fast response time:typically less tha

Axial Lead Transient Voltage Suppressors (TVS)

Description The SAC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip ♦ 500W peak pulse power capability with a 10/1000µs waveform, repetitive rate (dut

Transient Voltage Suppressors

FEATURES ☆ Plastic package has Underwriters Laboratory Flammability Classification 94V-O. ☆ Glass passivated junction. ☆ 500W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01. ☆ Excellent clamping capability. ☆ Low incremental surge resistance. ☆ Fast

瞬态抑制二极管

Axial Lead Transient Voltage Suppressors

文件：262.8 Kbytes Page：3 Pages

Low Capacitance Transient Voltage Suppressor Stand-Off Voltage - 5.0 to 50 Volts 500 Watt Peak Pulse Power

文件：282.81 Kbytes Page：4 Pages

LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR STAND-OFF VOLTAGE-5.0 TO 50 Volts

文件：284.7 Kbytes Page：3 Pages

Surface Mount Transient Voltage Suppressors (TVS)

文件：3.90527 Mbytes Page：56 Pages

Axial Lead Transient Voltage Suppressors

文件：412.51 Kbytes Page：4 Pages

封装/外壳：DO-204AC，DO-15，轴向 包装：卷带（TR）剪切带（CT） 描述：TVS DIODE 6VWM 11.2VC DO204AC 电路保护 TVS - 二极管

LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR

文件：161.93 Kbytes Page：2 Pages

Transient Voltage Suppressor

文件：284.23 Kbytes Page：3 Pages

TVS Diode Products

文件：3.3173 Mbytes Page：146 Pages

The SAC Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events

文件：747.17 Kbytes Page：4 Pages

LOW CAPACITANCE TRANSIENT VOLTAGE VBR : 5.0 - 50 Volts SUPPRESSOR

文件：38.98 Kbytes Page：2 Pages

Transient Voltage Suppression Diodes

500W Low Capacitance Transient Voltage Suppressor

Features • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering information) • Glass Passivated Junction • Excellent Clamping Capability • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1 • UL Recognized File # E331408 • Halogen fre

封装/外壳：DO-204AC，DO-15，轴向 包装：卷带（TR） 描述：TVS DIODE 6VWM 11.2VC DO204AC 电路保护 TVS - 二极管

500W Uni-directional Transient Voltage Suppressor

TVS (3167)

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 500W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts to BV

MOSORB ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS

The SA5.0A series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The SA5.0A series is supplied in Motorola’s exclusive, cost-effective, highly

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 500W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts to BV

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 500W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts to BV

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 500W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts to BV