5.0 thru 170 volts 500 Watts Transient Voltage Suppressors

DESCRIPTION: This Transient Voltage Suppressor is an economical, molded, commercial product used to protect voltage sensitive components from destruction or partial degradation. The response time of their clamping action is virtually instantaneous (1 x 10-12 seconds) and they have a peak pulse po

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clam

5.0 To 190V 500W Axial Lead Transient Voltage Suppressors (TVS)

Features Glass passivated chip junction in DO-15 Package Low leakage Uni and Bidirectional unit Excellent clamping capability 500W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01% Fast response time: typically less than 1.0ps from 0 Volts to VBR min Typi

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 5.0 TO 170 Volts

VOLTAGE - 5.0 TO 170 Volts 500Watt Peak Power 3.0 Watt Steady State Feature * Plastic package has Underwriters Laboratory Flammability Classification 94V-O * Glass passivated chip junction in DO-15 package * 500W surge capability at 1ms * Excellent clamping capability * Low zener impedan

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clam

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 500 Watts

文件：131.64 Kbytes Page：6 Pages

Surface Mount Transient Voltage Suppressors (TVS)

文件：3.90527 Mbytes Page：56 Pages

Axial Lead Transient Voltage Suppressors

文件：646.25 Kbytes Page：6 Pages

瞬态抑制二极管

瞬态抑制二极管

2.5GHz low voltage fractional-N synthesizer

GENERAL DESCRIPTION The SA8016 BICMOS device integrates programmable dividers, charge pumps and a phase comparator to implement a phase-locked loop. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 3 V supplies. FEATURES • Low phase noise • Lo

2.5GHz low voltage fractional-N synthesizer

GENERAL DESCRIPTION The SA8016 BICMOS device integrates programmable dividers, charge pumps and a phase comparator to implement a phase-locked loop. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 3 V supplies. FEATURES • Low phase noise • Lo

2.5GHz low voltage fractional-N synthesizer

GENERAL DESCRIPTION The SA8016 BICMOS device integrates programmable dividers, charge pumps and a phase comparator to implement a phase-locked loop. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 3 V supplies. FEATURES • Low phase noise • Lo

Low-voltage 1.8GHz fractional-N synthesizer

DESCRIPTION The SA8025A is a monolithic low power, high performance dual frequency synthesizer fabricated in QUBiC BiCMOS technology. The SA8025A is an improved version of the SA8025, suitable for narrow band systems like the Japan Personal Digital Cellular (PDC) system. The new design improves t

Low-voltage 1.8GHz fractional-N synthesizer

DESCRIPTION The SA8025A is a monolithic low power, high performance dual frequency synthesizer fabricated in QUBiC BiCMOS technology. The SA8025A is an improved version of the SA8025, suitable for narrow band systems like the Japan Personal Digital Cellular (PDC) system. The new design improves t

2.5GHz low voltage fractional-N dual frequency synthesizer

GENERAL DESCRIPTION The SA8026 BICMOS device integrates programmable dividers, charge pumps and a phase comparator to implement a phase-locked loop. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 3 V supplies. FEATURES • Low phase noise • Lo

2.5GHz low voltage fractional-N dual frequency synthesizer

GENERAL DESCRIPTION The SA8026 BICMOS device integrates programmable dividers, charge pumps and a phase comparator to implement a phase-locked loop. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 3 V supplies. FEATURES • Low phase noise • Lo

2.5 GHz low voltage, low power RF fractional-N/IF integer frequency synthesizer

GENERAL DESCRIPTION The SA8027 BICMOS device integrates programmable dividers, charge pumps and phase comparators to implement phase-locked loops. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 3 V supplies. FEATURES • Low phase noise • Low

2.5 GHz low voltage, low power RF fractional-N/IF integer frequency synthesizer

GENERAL DESCRIPTION The SA8027 BICMOS device integrates programmable dividers, charge pumps and phase comparators to implement phase-locked loops. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 3 V supplies. FEATURES • Low phase noise • Low

2.5 GHz low voltage, low power RF fractional-N/IF integer frequency synthesizer

GENERAL DESCRIPTION The SA8027 BICMOS device integrates programmable dividers, charge pumps and phase comparators to implement phase-locked loops. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 3 V supplies. FEATURES • Low phase noise • Low

2.5 GHz sigma delta fractional-N / 760 MHz IF integer frequency synthesizers

GENERAL DESCRIPTION The SA8028 BICMOS device integrates programmable dividers, charge pumps and phase comparators to implement phase–locked loops. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 3 V supplies. FEATURES • Extremely low phase no

2.5 GHz sigma delta fractional-N / 760 MHz IF integer frequency synthesizers

GENERAL DESCRIPTION The SA8028 BICMOS device integrates programmable dividers, charge pumps and phase comparators to implement phase–locked loops. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 3 V supplies. FEATURES • Extremely low phase no

5.0 thru 170 volts 500 Watts Transient Voltage Suppressors

DESCRIPTION: This Transient Voltage Suppressor is an economical, molded, commercial product used to protect voltage sensitive components from destruction or partial degradation. The response time of their clamping action is virtually instantaneous (1 x 10-12 seconds) and they have a peak pulse po

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 5.0 TO 170 Volts

VOLTAGE - 5.0 TO 170 Volts 500Watt Peak Power 3.0 Watt Steady State Feature * Plastic package has Underwriters Laboratory Flammability Classification 94V-O * Glass passivated chip junction in DO-15 package * 500W surge capability at 1ms * Excellent clamping capability * Low zener impedan

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clam

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clam

5.0 To 190V 500W Axial Lead Transient Voltage Suppressors (TVS)

Features Glass passivated chip junction in DO-15 Package Low leakage Uni and Bidirectional unit Excellent clamping capability 500W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01 Fast response time: typically less than 1.0ps from 0 Volts to VBR min Typical I

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clam

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clam

5.0 To 190V 500W Axial Lead Transient Voltage Suppressors (TVS)

Features Glass passivated chip junction in DO-15 Package Low leakage Uni and Bidirectional unit Excellent clamping capability 500W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01% Fast response time: typically less than 1.0ps from 0 Volts to VBR min Typi

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clam

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clam

5.0 To 190V 500W Axial Lead Transient Voltage Suppressors (TVS)

Features Glass passivated chip junction in DO-15 Package Low leakage Uni and Bidirectional unit Excellent clamping capability 500W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01 Fast response time: typically less than 1.0ps from 0 Volts to VBR min Typical I

Axial Lead Transient Voltage Suppressor

文件：145.16 Kbytes Page：7 Pages

Axial Lead Transient Voltage Suppressor

文件：145.16 Kbytes Page：7 Pages

Axial Lead Transient Voltage Suppressor

文件：381.76 Kbytes Page：6 Pages

TVS Axial Lead

Axial Lead Transient Voltage Suppressor

文件：381.76 Kbytes Page：6 Pages

封装/外壳：20-TSSOP（0.173"，4.40mm 宽） 包装：托盘 描述：IC N/IF FREG SYNTHESIZER 20TSSOP 集成电路（IC） 时钟发生器，PLL，频率合成器

封装/外壳：20-TSSOP（0.173"，4.40mm 宽） 包装：卷带（TR） 描述：IC FREQ SYNTHESIZER 20-TSSOP 集成电路（IC） 时钟发生器，PLL，频率合成器

Surface Mount Transient Voltage Suppressors (TVS)

文件：3.90527 Mbytes Page：56 Pages

Axial Lead Transient Voltage Suppressors

文件：646.25 Kbytes Page：6 Pages

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 500 Watts

文件：131.64 Kbytes Page：6 Pages

Surface Mount Transient Voltage Suppressors (TVS)

文件：3.90527 Mbytes Page：56 Pages

Surface Mount Transient Voltage Suppressors (TVS)

文件：3.90527 Mbytes Page：56 Pages