TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR

FEATURES * Glass passivated junction * 500 Watts Peak Pulse Power capability on 10/1000 µs waveform * Excellent clamping capability * Low zener impedance * Fast response time

500WATTS TRANSIENT VOLTAGE SUPPRESSOR 5.0 TO 170 VOLTS

Features • Glass passivated chip • Low leakage • Uni and Bidirectional unit • Excellent clamping capability • the plastic material has U/L recognition 94V-O • Fast response time

5.0 thru 170 volts 500 Watts Transient Voltage Suppressors

DESCRIPTION: This Transient Voltage Suppressor is an economical, molded, commercial product used to protect voltage sensitive components from destruction or partial degradation. The response time of their clamping action is virtually instantaneous (1 x 10-12 seconds) and they have a peak pulse po

H-BRIDGE MOTOR DRIVER/AMPLIFIERS

DESCRIPTION The SA50 is a pulse width modulation amplifier that can supply 5A continuous current to the load. The full bridge amplifier can be operated over a wide range of supply voltages. All of the drive/control circuitry for the lowside and highside switches are internal to the hybrid. The PW

500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

FEATURES * 500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds / .375(9.5mm) lead lengt

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 500W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts to BV

DEVICES FOR BIPOLAR APPLICATIONS

Features • Glass passivated junction. • 500W Peak Pulse Power capability on 10/1000 µs waveform. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 5.0 TO 170 Volts

VOLTAGE - 5.0 TO 170 Volts 500Watt Peak Power 3.0 Watt Steady State Feature * Plastic package has Underwriters Laboratory Flammability Classification 94V-O * Glass passivated chip junction in DO-15 package * 500W surge capability at 1ms * Excellent clamping capability * Low zener impedan

TRANSIENT VOLTAGE SUPPRESSOR

文件：52.06 Kbytes Page：4 Pages

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 500 Watts

文件：131.64 Kbytes Page：6 Pages

5A, 80V, Complete H-Bridge PWM Amplifier

127mm (5.0INCH) SINGLE DIGIT NUMERIC DISPLAYS

Description The Super Bright Greensource color devices aremade with Gallium Phosphide Green Light Emitting Diode. The High Efficiency Redsourcecolor devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Features LARGE SIZE. 5.0 INCH DIG

127mm (5.0INCH) SINGLE DIGIT NUMERIC DISPLAYS

Description The Super Bright Greensource color devices aremade with Gallium Phosphide Green Light Emitting Diode. The High Efficiency Redsourcecolor devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Features LARGE SIZE. 5.0 INCH DIG

127mm (5.0INCH) SINGLE DIGIT NUMERIC DISPLAYS

Description The Super Bright Greensource color devices aremade with Gallium Phosphide Green Light Emitting Diode. The High Efficiency Redsourcecolor devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Features LARGE SIZE. 5.0 INCH DIG

127mm (5.0INCH) SINGLE DIGIT NUMERIC DISPLAYS

Description The Super Bright Greensource color devices aremade with Gallium Phosphide Green Light Emitting Diode. The High Efficiency Redsourcecolor devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Features LARGE SIZE. 5.0 INCH DIG

127mm (5.0INCH) SINGLE DIGIT NUMERIC DISPLAYS

Description The Super Bright Greensource color devices aremade with Gallium Phosphide Green Light Emitting Diode. The High Efficiency Redsourcecolor devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Features LARGE SIZE. 5.0 INCH DIG

14.2 MM (0.50 INCH) SEVEN SEGMENT DISPLAY

Description The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Features ● 0.50 INCH DIGIT HEIGHT. ● LOW CURRENT OPERATION. ● EXCELLENT CHARACTER APPEARANCE. ● EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ● I.C.

14.2mm (0.50INCH) SEVEN SEGMENT DISPLAY

Description The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Features ● 0.50 INCH DIGIT HEIGHT. ● LOW CURRENT OPERATION. ● EXCELLENT CHARACTER APPEARANCE. ● EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ● I.C. COMPATIBLE. ● CATEGORIZED FOR LUMINOUS INTE

Addressable relay driver

DESCRIPTION The NE/SA5090 addressable relay driver is a high-current latched driver, similar in function to the 9934 address decoder. The device has 8 open-collector Darlington power outputs, each capable of 150mA load current. FEATURES • 8 high-current outputs • Low-loading bus-compatible inp

Addressable relay driver

DESCRIPTION The NE/SA5090 addressable relay driver is a high-current latched driver, similar in function to the 9934 address decoder. The device has 8 open-collector Darlington power outputs, each capable of 150mA load current. FEATURES • 8 high-current outputs • Low-loading bus-compatible inp

Addressable relay driver

DESCRIPTION The NE/SA5090 addressable relay driver is a high-current latched driver, similar in function to the 9934 address decoder. The device has 8 open-collector Darlington power outputs, each capable of 150mA load current. FEATURES • 8 high-current outputs • Low-loading bus-compatible inp

5.0 thru 170 volts 500 Watts Transient Voltage Suppressors

DESCRIPTION: This Transient Voltage Suppressor is an economical, molded, commercial product used to protect voltage sensitive components from destruction or partial degradation. The response time of their clamping action is virtually instantaneous (1 x 10-12 seconds) and they have a peak pulse po

500 Watt Peak Power MiniMOSORB Zener Transient Voltage Suppressors

The SA5.0A series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The SA5.0A series is supplied in ON Semiconductor’s exclusive, cost-effective

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 5.0 TO 170 Volts

VOLTAGE - 5.0 TO 170 Volts 500Watt Peak Power 3.0 Watt Steady State Feature * Plastic package has Underwriters Laboratory Flammability Classification 94V-O * Glass passivated chip junction in DO-15 package * 500W surge capability at 1ms * Excellent clamping capability * Low zener impedan

TRANSZORB짰 Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • Available in unidirectional and bidirectional • 500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Solde

500 Watt Peak Power MiniMOSORB Zener Transient Voltage Suppressors

The SA5.0A series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The SA5.0A series is supplied in ON Semiconductor’s exclusive, cost-effective

H-BRIDGE MOTOR DRIVER/AMPLIFERS

DESCRIPTION The SA50CE is a pulse width modulation amplifier that can continuously supply 5A to the load. The full bridge amplifier can be operated over a wide range of supply voltages. All of the drive/control circuitry for the lowside and high side switches are internal to the hybrid. The PWM c

H-Bridge Motor Driver/Amplifiers

DESCRIPTION The SA50CE is a pulse width modulation amplifier that can continuously supply 5A to the load. The full bridge amplifier can be operated over a wide range of supply voltages. All of the drive/control circuitry for the lowside and high side switches are internal to the hybrid. The PWM c

发射芯片

包装：散装 描述：CONN SPLICE 500MCM CRIMP PAN-LUG 连接器，互连器件 电线接头连接器

流量传感器, SAD10XDB50KG/US-100

包装：托盘 描述：FLOW SENSOR; ANALOGUE SIGNAL; ME 传感器，变送器 流量传感器 - 工业

SA50100585, The Platinum Resistance temperature sensor (PT-RTD)

文件：1.08851 Mbytes Page：7 Pages

SA50101528, The Platinum Resistance temperature sensor (PT-RTD)

文件：1.08067 Mbytes Page：7 Pages

SA50160527, The Platinum Resistance temperature sensor (PT-RTD)chip

文件：1.09133 Mbytes Page：7 Pages

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 500 Watts

文件：131.64 Kbytes Page：6 Pages

500 Watt Peak Power MiniMOSORBZener

文件：100.17 Kbytes Page：5 Pages