5 Amp Silicon Rectifier 50 to 1000 Volts

Features • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering information) • For Surface Mount Applications • Extremely Low Thermal Resistance • High Current Capability • High Temp Soldering: 260°C for 10 Seconds At Terminals • Case Material: Molded Plas

Standard silicon rectifier diodes

Surface mount diode Forward Current: 5 A Reverse Voltage: 50 to 1000 V Features • Max. solder temperature: 260°C • Plastic material has UL classification 94V-0 Mechanical Data • Plastic case SMC /DO-214AB • Weight approx.: 0,21 g • Terminals: plated terminals solderable per MIL-STD-75

5.0 AMPS. Surface Mount Rectifiers

Features ◇ For surface mounted application ◇ Glass passivated junction chip. ◇ Low forward voltage drop ◇ High current capability ◇ Easy pick and place ◇ High surge current capability ◇ Plastic material used carries Underwriters Laboratory Classification 94V-0 ◇ High temperature soldering:

Surface Mount Si-Rectifiers

Features VRRM up to 2000 V Compliant to RoHS, REACH, Conflict Minerals 1) Typical Applications 50/60 Hz Mains Rectification, Power Supplies, Polarity Protection Commercial grade 1) Mechanical Data 1) Taped and reeled 3000 / 13“ Weight approx. 0.21 g Case mater

5.0A SURFACE MOUNT GLASS PASSIVATED STANDARD DIODE

Features ● Glass Passivated Die Construction ● Ideally Suited for Automatic Assembly ● Low Forward Voltage Drop ● Surge Overload Rating to 100A Peak ● Low Power Loss ● Built-in Strain Relief ● Plastic Case Material has UL Flammability Classification Rating 94V-O

5.0A Surface Mount Rectifier

Features • Low profile surface mounted package • Ideal for automated placement • Glass passivated chip junction • Low forward voltage drop • Low leakage current • High forward surge capability • High temperature soldering: 250 °C / 10 seconds at terminals • RoHS compliant

SURFACE MOUNT RECTIFIER

VOLTAGE RANGE 50 to 1000 Volts CURRENT 5.0 Ampere FEATURES • Plastic package has underwrites laboratory flammability Classification 94V-0 • For surface mounted applications • Low profile package • Built-in strain relief, ideal for automated placement • Glass Passivated chip junction • High

Surface Mount Glass Passivated Rectifier

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Low forward voltage drop • Low leakage current • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified • Material categorization: Fo

Surface Mount Standard Rectifier

Voltage Range 50 to 1000 V Current 5.0 Ampere Features ◇ Low forward voltage drop ◇ High current capability ◇ High surge current capability ◇ Low reverse leakage current ◇ Glass passivated chip

SURFACE MOUNT GENERAL RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current - 5.0 Amperes FEATURES ♦ The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ♦ For surface mounted applications ♦ Low reverse leakage ♦ Built-in strain relief,ideal for automated placement ♦ High forward sur

For surface mounted applications

• Nominal current 5 A • Repetitive peak reverse voltage 50...1000 V • Plastic case ~ SMC • Weight approx. 0.21 g • Plastic material has UL classification 94V-0 • Standard packaging taped and reeled

SURFACE MOUNT GLASS PASSIVATED RECTIFIER

FEATURES ● Glass Passivated Die Construction ● Ideally Suited for Automatic Assembly ● Low Forward Voltage Drop ● Surge Overload Rating to 100A Peak ● Low Power Loss ● Built-in Strain Relief ● Plastic Case Material has UL Flammability Classification Rating 94V-O

SURFACE MOUNT GENERAL RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current - 5.0 Ampere FEATURES ● The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ● For surface mounted applications ● Low reverse leakage ● Built-in strain relief,ideal for automated placement ● High forward surg

PLASTIC SILICON RECTIFIER

FEATURES Plastic package has underwriters laboratory 111 flammability classification 94V-0 For surface mounted applications Glass passivated chip junction Built-in strain relief,ideal for automated placement High temperature soldering: 111 250oC/10 seconds at terminals Low profile package

SURFACE MOUNT RECTIFIER

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications in order to optimize board space • Easy pick and place • Glass passivated junction • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249

STANDARD RECTIFIER

Features · Low profile space · Ideal for automated placement · Glass passivated chip junctions · Low forward voltage drop · Low leakage current · High forward surge capability · High temperature soldering 260℃/10 seconds at terminals · Component in accordance to RoHS 2011/65/EU and WEEE

Surface-Mount Glass Passivated Rectifier

FEATURES • Low profile package • Ideal for automated placement • Glass passivated pellet chip junction • Low forward voltage drop • Low leakage current • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified available - Automotiv

5.0A SURFACE MOUNT GLASS PASSIVATED STANDARD DIODE

Glass Passivated Die Construction Ideally Suited for Automatic Assembly Low Forward Voltage Drop Surge Overload Rating to 100A Peak Low Power Loss Built-in Strain Relief Plastic Case Material has UL Flammability Classification Rating 94V-0

SUFACE MOUNT GENERAL PURPOSE SILICON RECTIFIER

Features The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Low reverse leakage Built-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 250 C/10 sec

SURFACE MOUNT RECTIFIER DIODES

文件：314.897 Kbytes Page：2 Pages

5.0 AMPS. Surface Mount Rectifiers

文件：192.58 Kbytes Page：2 Pages

5 Amp Silicon Rectifier 50 to 1000 Volts

文件：224.27 Kbytes Page：5 Pages

SURFACE MOUNT GENERAL RECTIFIER

文件：522.84 Kbytes Page：3 Pages

SURFACE MOUNT RECTIFIER

文件：482.5 Kbytes Page：2 Pages

Standard Recovery SMD Rectifier Diodes

文件：151.81 Kbytes Page：2 Pages

5.0 AMP SURFACE MOUNT SILICON RECTIFIERS

文件：285.51 Kbytes Page：3 Pages

Surface Mount General Purpose Silicon Rectifiers

文件：437.48 Kbytes Page：3 Pages

5A, 50V - 1000V Surface Mount Rectifiers

文件：359.11 Kbytes Page：4 Pages

Surface Mount Glass Passivated Rectifier

文件：95.94 Kbytes Page：4 Pages

Standard Recovery SMD Rectifier Diodes

文件：144.81 Kbytes Page：2 Pages

GENERAL PURPOSE PLASTIC RECTIFIER

文件：416.21 Kbytes Page：2 Pages

Surface Mount Glass Passivated Rectifier

文件：84.47 Kbytes Page：4 Pages

Surface Mount Standard Rectifiers

文件：1.13321 Mbytes Page：2 Pages

General Purpose Rectifier

文件：204.54 Kbytes Page：2 Pages

Surface Mount Standard rectifiers

文件：397.84 Kbytes Page：3 Pages

封装/外壳：DO-214AB，SMC 包装：带盒（TB） 描述：DIODE GEN PURP 100V 5A DO214AB 分立半导体产品 二极管 - 整流器 - 单

Surface Mount Standard Rectifiers

文件：1.18558 Mbytes Page：2 Pages

Surface Mount Glass Passivated Rectifier

文件：84.47 Kbytes Page：4 Pages

SURFACE MOUNT RECTIFIER

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications in order to optimize board space • Easy pick and place • Glass passivated junction • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249

Surface Mount General Purpose Silicon Rectifiers

Features For surface mounted applications Low profile package Glass passivated chip junction Easy to pick and place Lead free in comply with EU RoHS 2011/65/EU directives

Surface Mount Rectifiers

REVERSE VOLTAGE: 50 --- 1000 V CURRENT: 5.0 A Features ◇ Plastic package has underwriters laboratory flammabilityclassification 94V-0 ◇ For surface mounted applications ◇ Low profile package ◇ Built-in strain relief,ideal for automated placement ◇ High temperature soldering: 250°C/10 second

SURFACE MOUNT RECTIFIERS

REVERSE VOLTAGE: 50 --- 1000 V CURRENT: 5.0 A FEATURES ◇ Plastic package has underwriters laboratory flammabilityclassification 94V-0 ◇ For surface mounted applications ◇ Low profile package ◇ Built-in strain relief,ideal for automated placement ◇ High temperature soldering: 250°C/10 second

PLASTIC SILICON RECTIFIER

FEATURES Plastic package has underwriters laboratory 111 flammability classification 94V-0 For surface mounted applications Glass passivated chip junction Built-in strain relief,ideal for automated placement High temperature soldering: 111 250oC/10 seconds at terminals Low profile package

5.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER

Features • Glass Passivated Die Construction • Low Forward Voltage Drop and High Current Capability • Surge Overload Rating to 100A Peak • Ideally Suited for Automated Assembly • Lead-Free Finish; RoHS Compliant (Notes 1 & 2) • Halogen and Antimony Free. “Green” Device (Note 3)

SURFACE MOUNT RECTIFIER

FEATURES ● Low profile package ● For surface mounted applications ● High current capability ● Built-in strain relief, ideal for automated placement ● Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ● High temperature soldering: 250℃/10 seconds at terminals

SURFACE MOUNT GLASS PASSIVATED RECTIFIER

VOLTAGE - 50 TO 1000 VOLTS CURRENT - 5.0 AMPERES FEATURES • Glass Passivated Die Construction • Low Forward Voltage Drop and High Current Capability • Surge Overload Rating to 100A Peak • Ldeally Suited for Automated Assembly

SURFACE MOUNT GLASS PASSIVATED RECTIFIER

5.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER

Features • Glass Passivated Die Construction • Low Forward Voltage Drop and High Current Capability • Surge Overload Rating to 100A Peak • Ideally Suited for Automated Assembly

5.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER

Features • Glass Passivated Die Construction • Low Forward Voltage Drop and High Current Capability • Surge Overload Rating to 100A Peak • Ideally Suited for Automated Assembly • Lead-Free Finish; RoHS Compliant (Notes 1 & 2) • Halogen and Antimony Free. “Green” Device (Note 3)

Disconnectable Crimp style connectors

[JST] This, the thinnest, 2.5mm (.098) pitch connector, is 8.1mm (.319) in height after mounting and 3.8mm (.150) in width. It is designed to meet the demand for the high density connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost. Features • C

5 Amp Silicon Rectifier 50 to 1000 Volts

Features • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering information) • For Surface Mount Applications • High Current Capability • Extremely Low Thermal Resistance • High Temp Soldering:260°C for 10 Seconds At Terminals • Halogen free available upon requ

5.0A SURFACE MOUNT GLASS PASSIVATED STANDARD DIODE

Features ● Glass Passivated Die Construction ● Ideally Suited for Automatic Assembly ● Low Forward Voltage Drop ● Surge Overload Rating to 100A Peak ● Low Power Loss ● Built-in Strain Relief ● Plastic Case Material has UL Flammability Classification Rating 94V-O

5.0A SURFACE MOUNT GLASS PASSIVATED STANDARD DIODE

Glass Passivated Die Construction Ideally Suited for Automatic Assembly Low Forward Voltage Drop Surge Overload Rating to 100A Peak Low Power Loss Built-in Strain Relief Plastic Case Material has UL Flammability Classification Rating 94V-0

2.5mm pitch/Disconnectable Crimp style connectors

• Current rating: 3A AC, DC (AWG #22) • Voltage rating: 250V AC, DC • Temperature range: -25°C to +85°C (including temperature rise in applying electrical current) • Contact resistance: Initial value/10m Ω max. After environmental testing/20m Ω max. • Insulation resistance: 1,000M Ω min. •

Disconnectable Crimp style connectors

Features –––––––––––––––––––––––– • Original folded beam contact The protected, folded beam contact in this connector provides high contact pressure with an over-stress stop feature. This ensures dependable continuity when used with low voltage, low current carrying circuits (dry circuits). T

JQ CONNECTOR 2.5 mm pitch/Board-to-board connectors

● High contact pressure ● Box-shaped shroud ● Secure locking on printed circuit boards ● Vertical, horizontal and parallel mounting ● Interchangeability

Disconnectable Crimp style connectors

Features –––––––––––––––––––––––– • Original folded beam contact The protected, folded beam contact in this connector provides high contact pressure with an over-stress stop feature. This ensures dependable continuity when used with low voltage, low current carrying circuits (dry circuits). T

2.5mm pitch/Disconnectable Crimp style connectors

• Current rating: 3A AC, DC (AWG #22) • Voltage rating: 250V AC, DC • Temperature range: -25°C to +85°C (including temperature rise in applying electrical current) • Contact resistance: Initial value/10m Ω max. After environmental testing/20m Ω max. • Insulation resistance: 1,000M Ω min. •

1.5 mm pitch/Disconnectable Crimp style connectors

The ZH connector is very small with a mounting height of 5.6 mm and a thickness of only 3.5 mm. Contact retention lances on the housing make insertion easier, while the dimple at the center of the contact ensures reliable contact with the post. ● Compact, low profile design ● Housing lances

1.5 mm pitch/Disconnectable Crimp style connectors

The ZH connector is very small with a mounting height of 5.6 mm and a thickness of only 3.5 mm. Contact retention lances on the housing make insertion easier, while the dimple at the center of the contact ensures reliable contact with the post. ● Compact, low profile design ● Housing lances