Adhesives Selection Guide

Adhesives and Sealants That Accommodate a Wide Range of Applications, Materials, and Environmental Conditions

S1017 - 倾斜开关, 15°

The S1017 is a mercury contacts Tilt Switch with 240VAC RMS maximum switching voltage. ·15A at 240Vac/19A at 120VAC Maximum switching current\n·3600VA Maximum switching capacity\n·0.3R Maximum contact resistance;

TILT SWITCH MODULE - Mercury Contacts

文件：18.73 Kbytes Page：1 Pages

包装：袋 描述：CONN PWR PLUG 2X5.5MM SOLDER 连接器，互连器件 电源连接器

RGB color sensor integrated in small and thin package

S10170 is a color sensor molded into a plastic package having a 3-channel (RGB) photodiode sensitive to the Red (λ=590 nm Min.), Green (λ=480 to 600 nm) and Blue (λ=400 to 540 nm) regions of the spectrum. When compared to the previous model (S9702), S10170 is significantly miniaturized the package

包装：散装 描述：TAPE 1\ 胶带，粘合剂，材料 胶带

RTD温度探头

RTD温度探头

GSM900/1800/1900 SPDT TX/RX Switch

Description The CXG1028ATN is a high power SPDT switch suitable for Digital Cellular applications. This device is part of a growing family of MMIC Antenna switches for digital cellular and cordless radios. It uses the state-of-the-art Sony GaAs JFET process. Features • Positive voltage

METAL GATE RF SILICON FET

GOLD METALLISED MULTI-PURPOSE SILICON DMOS RF FET 150W – 28V – 175MHz SINGLE ENDED FEATURES • SIMPLIFIED AMPLIFIER DESIGN • SUITABLE FOR BROAD BAND APPLICATIONS • LOW Crss • SIMPLE BIAS CIRCUITS • LOW NOISE • HIGH GAIN – 13 dB MINIMUM APPLICATIONS • HF/VHF/UHF COMMUNICATIONS from 1 MHz to

3.3V LVDS 1-Bit High Speed Differential Driver

General Description This single driver is designed for high speed interconnects utilizing Low Voltage Differential Signaling (LVDS) technology. The driver translates LVTTL signal levels to LVDS levels with a typical differential output swing of 350 mV which provides low EMI at ultra low power dis

Power Amplifier Applications

Power Amplifier Applications • Complement to KSD1408

Low-voltage frequency synthesizer for radio telephones

GENERAL DESCRIPTION The UMA1017M BICMOS device integrates prescalers, a programmable divider, and phase comparator to implement a phase-locked loop. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 5 V supplies. The synthesizer operates a