■ Product developed in compliance with

ISO26262:2018 ASIL B.

■ Differential bridge sensor input with selectable

on-chip or external temperature sensor (PTC,

PN-junction and sensor bridge) based TC

correction.

■ 0.5mV/V to 800mV/V sensor span with 12 to

18bit resolution; supported sensor offset/span

ratio of 10.

■ Compensation for offset, gain, and higher order

nonlinearity as well as for temperature

coefficients of measured bridge sensor input

signal.

■ Accuracy: 0.35% Full Scale (FS) at -40°C to

125°C; 1%FS at -40°C to 150°C.

■ Output update rate of 100μs in fastest mode;

comparable analog bandwidth in 3kHz region

■ Third order digital LPF with cut-off frequency of

10Hz to 1000Hz, and configurable transfer characteristic.

■ One-pass, end-of-line calibration algorithm

minimizes production costs: fast in calibration.

Statistical based temperature calibration point

minimization is supported.

■ Minimum number of external components

enables design of sensor modules with best-inclass form factor.

■ Qualified according to AEC-Q100 Grade 0;

operating temperature range: -40°C to 150°C.