■ Differential bridge sensor input with selectable

on-chip or external temperature sensor – PTC,

PN-junction and sensor bridge – based TC correction

■ 0.5mV/V to 800mV/V sensor span with 12 to 18bit

resolution; supported sensor offset/span ratio of 10

■ Compensation for offset, gain, and higher order

nonlinearity as well as for temperature coefficients

of measured bridge sensor input signal

■ Accuracy: 0.35% full scale (FS) at -40°C to 125°C;

1%FS at -40°C to 150°C

■ Output update rate of 100μs in fastest mode;

comparable analog bandwidth in 3kHz region

■ Third order digital LPF with cut-off frequency of

10Hz to 1000Hz, and configurable transfer characteristic

■ One-pass, end-of-line calibration algorithm

minimizes production costs: fast in calibration.

Statistical based temperature calibration point

minimization is supported.

■ Minimum number of external components enables

design of sensor modules with best-in-class form factor

■ Qualified according to AEC-Q100 Grade 0;

operating temperature range: -40°C to 150°C