Features

■ 32-bit RXv2 CPU core

• Max. operating frequency: 54 MHz

Capable of 88.56 DMIPS in operation at 54 MHz

• Enhanced DSP: 32-bit multiply-accumulate and 16-bit

multiply-subtract instructions supported

• Built-in FPU: 32-bit single-precision floating point (compliant to

IEEE754)

• Divider (fastest instruction execution takes two CPU clock cycles)

• Fast interrupt

• CISC Harvard architecture with 5-stage pipeline

• Variable-length instructions, ultra-compact code

• On-chip debugging circuit

• Memory protection unit (MPU) supported

■ Low power design and architecture

• Operation from a single 1.8-V to 5.5-V supply

• RTC capable of operating on the battery backup power supply

• Three low power consumption modes

• Low power timer (LPT) that operates during the software standby state

■ On-chip flash memory for code

• 128- to 512-Kbyte capacities

• On-board or off-board user programming

• Programmable at 1.8 V

• For instructions and operands

■ On-chip data flash memory

• 8 Kbytes (1,000,000 program/erase cycles (typ.))

• BGO (Background Operation)

■ On-chip SRAM, no wait states

• 32- to 64-Kbyte size capacities

■ Data transfer functions

• DMAC: Incorporates four channels

• DTC: Four transfer modes

■ ELC

• Module operation can be initiated by event signals without using

interrupts.

• Linked operation between modules is possible while the CPU is sleeping.

■ Reset and supply management

• Eight types of reset, including the power-on reset (POR)

• Low voltage detection (LVD) with voltage settings

■ Clock functions

• Main clock oscillator frequency: 1 to 20 MHz

• External clock input frequency: Up to 20 MHz

• Sub-clock oscillator frequency: 32.768 kHz

• PLL circuit input: 4 MHz to 12.5 MHz

• On-chip low- and high-speed oscillators, dedicated on-chip low-speed

oscillator for the IWDT

• USB-dedicated PLL circuit: 4, 6, 8, or 12 MHz

54 MHz can be set for the system clock and 48 MHz for the USB clock

• Generation of a dedicated 32.768-kHz clock for the RTC

• Clock frequency accuracy measurement circuit (CAC)

■ Realtime clock

• Adjustment functions (30 seconds, leap year, and error)

• Calendar count mode or binary count mode selectable

• Time capture function

• Time capture on event-signal input through external pins

■ Independent watchdog timer

• 15-kHz on-chip oscillator produces a dedicated clock signal to drive

IWDT operation.

■ Useful functions for IEC60730 compliance

• Self-diagnostic and disconnection-detection assistance functions for

the A/D converter, clock frequency accuracy measurement circuit,

independent watchdog timer, RAM test assistance functions using the

DOC, etc.

■ External address space

• Four CS areas (4 × 16 Mbytes)

• 8- or 16-bit bus space is selectable per area

■ MPC

• Input/output functions selectable from multiple pins