COMMUNICATION CONVERTERS

General Description The 72-CNV-XX family of converters offer a flexible and reliable solution to the challenge of interfacing devices conforming to different serial communication standards. Grayhill converter products are designed for industrial environments. All communication lines have transien

RS-232/RS-485/RS-422 TRANSCEIVER WITH INTERNAL TERMINATION

GENERAL DESCRIPTION The SP339 is an advanced multiprotocol transceiver supporting RS-232, RS-485, and RS-422 serial standards in a 40 pin QFN package. Integrated cable termination and four configuration modes allow all three protocols to be used interchangeably over a single cable or connector wi

USB to Serial Surge and Optical Isolation converter RS-422/485

TAA Compliant. • Adds one high speed RS-422 / 485 serial port. • RS-422/485 port is optically isolated. • RS-422/485 port is protected by surge protector up to 25kv ESD. • Auto transmit buffer control for 2-wire RS-485 half-duplex operation. • Termination and BIAS resistors installed on-board

USB to Optical Adapter Industrial Isolated RS-422/485

TAA Compliant. • Adds a high speed RS-422 / 485 serial port via USB connection. • Requires no IRQ, DMA, I/O port. • Data rates: 300 bps to 921.6K bps. • Auto transmit buffer control for 2-wire RS-485 half-duplex operation. • Termination resistors installed on-board. • Monitor LEDs of TxD, Rx

USB to Serial Surge and Optical Isolation converter RS-422/485

TAA Compliant. • Adds one high speed RS-422 / 485 serial port. • RS-422/485 port is optically isolated. • RS-422/485 port is protected by surge protector up to 25kv ESD. • Auto transmit buffer control for 2-wire RS-485 half-duplex operation. • Termination and BIAS resistors installed on-board

Industrial Isolated RS-422/485 Repeater

• Extends signals an additional 1200 m • 2000 V, three-way optical isolation (input/output/power) • Data rates: up to 115.2 kbps • Wide temperature range: -40 to +80 °C • DIN rail mount IP30 case • 10-48 Vdc input (power supply required, not included, sold separately) • UL C1/D2 Listed, FCC,

Heavy Industrial RS-422/485 Isolated Repeater

PRODUCT FEATURES • Extends RS-422/485 an extra 1.2km (4000 ft) • Add 32 more network nodes • 2kV, 3-way isolation (input/output/power) • Data rates:1.2 to 115.2 Kbps • Wide operating temperature range: -40 to +85 °C • FCC, CE, RoHS, IEC-61850-3, IEEE-1613 • 10 to 48 VDC input power (power s

8 Port USB to RS-232/422/485 Octal Adapter

TAA Compliant. • Rugged ABS plastic housing. • Full RS-232 modem control signals and hardware. • Software flow control: RTS/CTS, XON/XOFF. • Baud rate up to 921.6K bps. • 128 byte transmit FIFO & 384 byte receive FIFO. • Non-standard baud rates supported • Serial port protected with surge p

LoRaWAN Single RS-485 I/O Module

Features ƒ LoRaWAN wireless technology with Less interference with high penetration rate capability ƒ Support Modbus/RTU communication protocol ƒ Support max. 128 address and 30 rule settings ƒ Compact design, suitable for plug and play applications ƒ Industrial design concept for different

RS-232/RS-485/RS-422 TRANSCEIVER WITH INTERNAL TERMINATION

GENERAL DESCRIPTION The SP339 is an advanced multiprotocol transceiver supporting RS-232, RS-485, and RS-422 serial standards in a 40 pin QFN package. Integrated cable termination and four configuration modes allow all three protocols to be used interchangeably over a single cable or connector wi

Async RS-232 to RS-485 Interface Bidirectional Converter, DB9 Female to Terminal Block

Converts RS-232 signals to RS-485 signals. Operates at speeds up to 115.2 kbps. Transmits up to 4000 feet (1219.2 m). Use point-to-point or multipoint.

SP330E RS-232/RS-485/RS-422 TRANSCEIVER WITH 1.65V-5.5V INTERFACE

文件：703.6 Kbytes Page：23 Pages

Sure Cross짰 RS-485 to USB Adapter Cable

文件：108 Kbytes Page：2 Pages

Single Port USB to RS-422 485 Hi-Speed Industrial Adapter

文件：51.85 Kbytes Page：1 Pages

RS485竊뉶ull-duplex竊뎘nput isolation safety barrier

文件：564.78 Kbytes Page：4 Pages

±16.5kV ESD, Large Output Swing, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers

文件：946.24 Kbytes Page：22 Pages

Battery Powered Converter CE

文件：169.79 Kbytes Page：2 Pages

The x485 are low-power transceivers for RS-485 and RS422 communication

General Description The x485 are low-power transceivers for RS-485 and RS422 communication. Each part contains one driver and one Receiver The driver slew rates of the x485 are not limited, allowing them to transmit up to 2.5Mbps. These transceivers draw between 120µA and 500µA of supply cu

功能：瞬态电压抑制（TVS） 包装：散装 描述：TBU EVAL BOARD PORT RS-485 开发板，套件，编程器 评估和演示板及套件

功能：瞬态电压抑制（TVS） 包装：散装 描述：TBU RS-485 EVAL BOARD 3 开发板，套件，编程器 评估和演示板及套件

ROUND INSTRUMENTATION HANDLES

[KEYSTONE] ROUND INSTRUMENTATION HANDLES FERRULES HANDLE MOUNTING SCREWS

WIPER SEALS

DESCRIPTION The BECA 485 profile is a double acting composite wiper seal composed of a filled PTFE friction ring and a pre-tightened rubber O'Ring. APPLICATIONS Agro-food Machine tools Hydraulic cylinders Fluid technologies

HIGH SPEED ETHERNET DATA LINE PROTECTOR

DESCRIPTION The 485ELC is low capacitance, two-stage transient voltage protector the provides primary and secondary protecton against lightning, inductve switching and electrostatc discharge (ESD) transient threats. The frst stage diverts the transient current through the ground terminal return p

HIGH SPEED ETHERNET DATA LINE PROTECTOR

文件：422.9 Kbytes Page：5 Pages

LITTEL PLUG짰 PHONE PLUGS

文件：17.56 Kbytes Page：1 Pages