GENERAL PURPOSE PLASTIC RECTIFIER

Features ● Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ● High surge current capability ● 2.5 ampere operation at TA=75 with no thermal runaway ● Low reverse leakage ● Construction utilizes void-free molded plastic technique ● High temperature soldering guara

2.5A GENERAL DIODES

FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * High temperature metallurgically bonded construction * Deffused junction * Capable of meeting environmental standards of MIL-S-19500 * 2.5 A operation at TA=55°C with no thermal runaway * Typical IR le

2.5 Amp Silicon Rectifier 50 to 1000 Volts

Features • Halogen free available upon request by adding suffix -HF • Low Cost • Low Leakage • Low Forward Voltage Drop • High Current Capability • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1 • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Complia

2.5 Amp MINIATURE PLASTIC SILICON RECTIFIERS

Features ■ LOW COST ■ DIFFUSED JUNCTION ■ LOW LEAKAGE ■ MEETS UL SPECIFICATION 94V-0

CURRENT 2.5 Amperes VOLTAGE 50 to 1000 Volts

Features • The plastic package carries Underwrites Laboratory Flammability Classification 94V-0 • Construction utilizes void-free molded plastic technique • High surge current capability • 2.5A operation at TL=75℃ with no thermal runaway • Low reverse leakage • High temperature soldering gua

2PLASTIC SILICON RECTIFIER

FEATURES ◇ Low cost ◇ Diffused junction ◇ Low leakage ◇ Low forward voltage drop ◇ High current capability ◇ The plastic material carries U/L recognition 94V-0

PLASTIC SILICON RECTIFIERS

FEATURES ● Low cost ● Diffused junction ● Low forward voltage drop ● Low reverse leakage current ● High current capability ● The plastic material carries UL recognition 94V-0

2.5A General Purpose Silicon Rectifier

Features • Low forward voltage drop • Low reverse leakage • High forward surge current capability • High temperature soldering: 260°C/10 seconds, 0.375” (9.5mm) lead length at 5 lbs (2.3kg) tension • RoHS Compliance

2.5 AMP SILICON RECTIFIERS

FEATURES * Low forward voltage drop * High current capability * High reliability * High surge current capability

AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER

FEATURES • Low coat construction • Low forward voltage drop • Low reverse leakage • High forward surge current capability • High temperature soldering guaranteed: 260℃/10 secods/.375”(9.5mm)lead length at 5 lbs(2.3kg) tension

TECHNICAL SPECIFICATIONS OF SILICON RECTIFIER

FEATURES • High reliability • Low leakage • Low forward voltage drop • High current capability

GENERAL PURPOSE PLASTIC RECTIFIERS

Features • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • High surge current capability. • 2.5 ampere operation at TA=75oC with no thermal runaway. • Low reverse leakage. • Construction utilizes void-free molded plastic technique. • High temperature soldering

2.5Amp silicon rectifier 50to1000 volts

Features • Low Cost • Low Leakage • Low Forward Voltage Drop • High Current Capability

General Purpose Rectifier

■ Features ● Io 2.5A ● VRRM 50V-1000V ● High surge current capability ■ Applications ● Rectifier

PLASTIC SILICON RECTIFIER

FEATURE • Low forward voltage • High current capability • Low leakage current • High surge capability • Low cost

GENERAL PURPOSE PLASTIC RECTIFIER

FEATURES • The plastic package has Underwrites Laboratory Flammability Classification 94V-0 • Construction utilizes void-free molded plastic technique • High surge current capability • 2.5A operation at TL=75°C with no thermal runaway • Low reverse leakage • High temperature soldering guaran

AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER

FEATURES • Low coat construction • Low forward voltage drop • Low reverse leakage • High forward surge current capability • High temperature soldering guaranteed: 260℃/10 secods/.375”(9.5mm)lead length at 5 lbs(2.3kg) tension

General Purpose Plastic Rectifier Reverse Voltage 50 to 1000 V Forward Current 2.5 A

Features • Low reverse leakage • High forward surge capability • High temperature soldering guaranteed: 260℃/10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3kg) tension • Lead and body according with ROHS standard

PLASTIC SILICON RECTIFIERS

FEATURES ◇ Low cost ◇ Diffused junction ◇ Low leakage ◇ Low forward voltage drop ◇ High current capability ◇ Easily cleaned with Freon,Alcohol,Isopropanol and similar solvents ◇ The plastic material carries U/L recognition 94V-0

2.5A SILICON RECTIFIER

Features ● Diffused Junction ● Low Forward Voltage Drop ● High Current Capability ● High Reliability ● High Surge Current Capability

GENERAL PURPOSE SILICON RECTIFIER

FEATURES ♦ The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ♦ Construction utilizes void-free molded plastic technique ♦ Low reverse leakage ♦ High forward surge current capability ♦ High temperature soldering guaranteed: 250 °C/10 seconds,0.375”(9.5mm) le

Genral Purpose Plastic Rectifier

Features ◇ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◇ High surge current capability ◇ 2.5 ampere operation at TA=75°C with no thermal runaway ◇ Low reverse leakage ◇ Construction utilizes void-free molded plastic technique ◇ High temperature soldering gua

2.5 AMP SILICON RECTIFIERS

FEATURES * Low forward voltage drop * High current capability * High reliability * High surge current capability * Both normal and Pb free product are available: * Normal:80~95Sn,5~20Pb * Pb free:99 Sn above can meet Rohs enviroment substance directive request

Standard Silicon Rectifiers

FEATURES ♦ For surface mounted applications ♦ Low profile package ♦ Open Junction chip ♦ High forward surge current capability ♦ Lead free in comply with EU RoHS 2011/65/EU directives MECHANICAL DATA ♦ Case: DO-15 ♦ Terminals: Solderable per MIL-STD-750, Method 2026 ♦ Approx. Weight: 0.33

GENERAL PURPOSE SILICON RECTIFIER

FEATURES · Low coat construction · Low forward voltage drop · Low reverse leakage · High forward surge current capability · High temperature soldering guaranteed: 260℃/10 secods/.375”(9.5mm)lead length at 5 lbs(2.3kg) tension

Plastic Silicon Rectifiers

文件：762.94 Kbytes Page：3 Pages

2.5 Amp Silicon Rectifier 50 to 1000 Volts

文件：432.22 Kbytes Page：4 Pages

General Purpose Plastic Rectifiers Reverse Voltage 50 to 1000V Forward Current 2.5A

文件：458.15 Kbytes Page：7 Pages

General Purpose Rectifier

文件：169.53 Kbytes Page：2 Pages

2.5 Amp MINIATURE PLASTIC SILICON RECTIFIERS DIFFUSED JUNCTION

文件：136.21 Kbytes Page：2 Pages

General Purpose Plastic Rectifier

文件：117.58 Kbytes Page：2 Pages

PLASTIC SILICON RECTIFIERS

文件：134.68 Kbytes Page：3 Pages

PLASTIC SILICON RECTIFIERS

文件：246.2 Kbytes Page：2 Pages

Genral Purpose Plastic Rectifier

文件：774.5 Kbytes Page：3 Pages

SILICON RECTIFIER (VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.5 Amperes)

文件：23.16 Kbytes Page：2 Pages

GLASS PASSIVATED RECTIFIERS

FEATURES ● Low cost ● Diffused junction ● Low forward voltage drop ● Low reverse leakage current ● High current capability ● The plastic material carries UL recognition 94V-0

CURRENT 2.5Amperes VOLTAGE 50 to 1000 Volts

Features • The plastic package carries Underwrites Laboratory Flammability Classification 94V-0 • High current capability • Low reverse leakage • Glass passivated junction • Low forward voltage drop • High temperature soldering guaranteed : 350℃ /10 seconds, 0.375(9.5mm) lead length, 5lbs.(2

General Purpose Plastic Rectifier Reverse Voltage 50 to 1000 V Forward Current 2.5 A

Features • Glass Passivated chip • Low reverse leakage • High forward surge capability • High temperature soldering guaranteed: 260℃/10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3kg) tension • Lead and body according with ROHS standard

General Purpose Rectifier

■ Features ● Io 2.5A ● VRRM 50V-1000V ● High surge current capability ■ Applications ● Rectifier

GLASS PASSIVATED JUNCTION RECTIFIER

Features ● Plastic package has Underwriters Laboratory Flammability Classification 94V-0 utilizing Flame retardant epoxy molding compound ● 2.5 ampere operation at TA=55°C with no thermal runaway ● Glass passivated junction in R-3 package

General Purpose Plastic Rectifiers Reverse Voltage 50 to 1000V Forward Current 2.5A

FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * High temperature metallurgically bonded construction * Glass passivated chip * Capable of meeting environmental standards of MIL-S-19500 * 2.5 A operation at TA=55°C with no thermal runaway * Typical I

2.5A GLASS PASSIV ATED RECTIFIER

Features ● Glass Passivated Die Construction ● Low Forward Voltage Drop ● High Current Capability ● High Reliability ● High Surge Current Capability

General Purpose Rectifier RL251G Through RL257G

Features High efficiency High current capability High reliability High surge current capability Low power loss Glass passivated chip junction Solder dip 275 °C max. 7 s, per JESD 22-B106

GENERAL PURPOSE PLASTIC RECTIFIER

Features  Low forward voltage drop  Low leakage current  High forward surge capability  Solder Resistance 270°C / 7s, or 380°C / 3s  Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC  This is a Pb − Free Device  All SMC parts are traceable to the wafer lot  Additional

2.5Amp General Purpose Rectifier

FEATURES • High Efficiency • High Current Capability • High Reliability • High Surge Current Capability • Low Power Loss • Glass Passivated Chip Junction • Solder Dip, Per JESD 22-B106

2.5Amp General Purpose Rectifier

FEATURES • High Efficiency • High Current Capability • High Reliability • High Surge Current Capability • Low Power Loss • Glass Passivated Chip Junction • Solder Dip, Per JESD 22-B106

2.5 Amp Glass Passivated Rectifier 50-1000 Volts

Features • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1 • Lead Free Finish/Rohs Compliant (Note1) (PSuffix designates Compliant. See ordering information) • 2.5 ampere operation at TA=55°C with no thermal runaway • Glass passivated junction in R-3 package • Haloge

2.5Amp glass passivated rectifier 50-1000 volts

Features ● Plastic package has Underwriters Laboratory Flammability Classification 94V-0 utilizing Flame retardant epoxy molding compound ● 2.5 ampere operation at TA=55oC with no thermal runaway ● Glass passivated junction in R-3 package

2.5A General Purpose Silicon Rectifier

Features • Low forward voltage drop • Low reverse leakage • High forward surge current capability • High temperature soldering: 260°C/10 seconds, 0.375” (9.5mm) lead length at 5 lbs (2.3kg) tension • RoHS Compliance

Glass Passivated Rectifiers

文件：768.37 Kbytes Page：3 Pages

GLASS PASSIVATED RECTIFIERS

文件：134.56 Kbytes Page：3 Pages

General Purpose Plastic Rectifier

文件：118.41 Kbytes Page：2 Pages

2.5 Amp Glass Passivated Rectifier 50-1000 Volts

文件：434.59 Kbytes Page：3 Pages

普通整流二极管

2.5 Amp Glass Passivated Rectifier 50-1000 Volts

文件：396.15 Kbytes Page：3 Pages

封装/外壳：R-3，轴向 包装：卷带（TR） 描述：DIODE GEN PURP 2.5A 100V R3 分立半导体产品 二极管 - 整流器 - 单

普通整流二极管

2.5 Amp Silicon Rectifier 50 to 1000 Volts

文件：238.09 Kbytes Page：4 Pages

封装/外壳：DO-204AC，DO-15，轴向 包装：带盒（TB） 描述：DIODE GPP 2.5A DO-15 分立半导体产品 二极管 - 整流器 - 单

Two Axis, Ministick Controller With Optional Momentary Switch

文件：618.31 Kbytes Page：2 Pages