10 - 4000 MHz Broadband Medium Power SPDT Switch

Qorvo's RF3024 is a GaAs pHEMT single-pole double-throw (SPDT) switch designed for general purpose switching applications which require very low insertion loss, moderate isolation, and medium power handling capability. The RF3024 is ideally suited for battery-powered and low control voltage applicat ·10MHz to 4GHz Operation\n·0.25dB Insertion Loss at 1GHz\n·26dB Isolation at 2GHz\n·1.8V Minimum Control Voltage\n·28dBm P0.1dB at 3V\n·18dBm P0.1dB at 1.8V\n·58dBm IP3 at 3V;

SAW Filter

文件：248.82 Kbytes Page：5 Pages

BROADBAND MEDIUM POWER SPDT SWITCH

文件：353.63 Kbytes Page：5 Pages

BROADBAND MEDIUM POWER SPDT SWITCH

文件：353.63 Kbytes Page：5 Pages

BROADBAND MEDIUM POWER SPDT SWITCH

文件：353.63 Kbytes Page：5 Pages

BROADBAND MEDIUM POWER SPDT SWITCH

文件：353.63 Kbytes Page：5 Pages

1 WATT CAPABILITY WITH PROPER HEAT SINKING

• 1N3016B THRU 1N3045B AVAILABLE IN JANHC PER MIL-PRF-19500/115 • 1 WATT CAPABILITY WITH PROPER HEAT SINKING • ALL JUNCTIONS COMPLETELY PROTECTED WITH SILICON DIOXIDE • COMPATIBLE WITH ALL WIRE BONDING AND DIE ATTACH TECHNIQUES, WITH THE EXCEPTION OF SOLDER REFLOW

Silicon planar type

Silicon planar type For stabilization of power supply ■ Features • Mini type package (3-pin) • Allowing to achieve a high-density set • Sharp rising performance • Wide voltage range: VZ = 2.0 V to 36 V

Silicon planar type

Silicon planar type For stabilization of power supply ■ Features • Mini type package (3-pin) • Allowing to achieve a high-density set • Sharp rising performance • Wide voltage range: VZ = 2.0 V to 36 V

Light Emitting Diode (LED)

Description: The NTE3020 through NTE3024 LEDs offer a variety of lens effects and color availability. The Red (NTE3020) source color device is made with Gallium Arsenide Phosphide on Gallium Arsenide Red Light Emitting Diode. The High Efficiency Red (NTE3022) and Orange (NTE3023) source color d

UHF LINEAR POWER TRANSISTOR

The TP3024B is a balanced transistor designed specifically for use in cellular radio systems. This device permits the design of a Class AB push–pull, high gain, broadband amplifier having a high degree of linearity without the need for complicated biasing circuitry. • Specified 26 Volts, 960 MHz