TRANSMIT/RECEIVE SWITCH

Product Description The RF2436 is a very low-cost transmit/receive GaAs MESFET switch. The device can handle power levels as high as +28dBm and spans a frequency range from DC to 2500MHz. The switch will operate from power supply voltages as low as 1.5V and as high as 6V with a CMOS logic driver

DC - 2500 MHz Transmit / Receive Switch

Qorvo's RF2436 is a very low-cost transmit/receive GaAs MESFET switch. The device can handle power levels as high as +28dBm and spans a frequency range from DC to 2500MHz. The switch will operate from power supply voltages as low as 1.5V and as high as 6V with a CMOS logic driver for the control inp • Single Positive Power Supply\n• Low Current Consumption\n• 1dB Insertion Loss at 900MHz\n• 24dB Crosstalk Isolation at 900MHz\n• +27dBm Output P1dB;

TRANSMIT/RECEIVE SWITCH

文件：65.92 Kbytes Page：6 Pages

TRANSMIT/RECEIVE SWITCH

文件：144.22 Kbytes Page：6 Pages

TRANSMIT/RECEIVE SWITCH

文件：65.92 Kbytes Page：6 Pages

TRANSMIT/RECEIVE SWITCH

文件：144.22 Kbytes Page：6 Pages

TRANSMIT/RECEIVE SWITCH

文件：65.92 Kbytes Page：6 Pages

TRANSMIT/RECEIVE SWITCH

文件：144.22 Kbytes Page：6 Pages

COUNTDOWN POWER TIMER

FEATURES ■ 28 V/400 mA Output Switch ■ Low-Cost Ceramic Timing Capacitor ■ Dual-Mode Timing Operation ■ -40°C to + 85°C Operation ■ 10 V to 16 V Operation ■ Internal Stabilizing Regulator ■ Low-Cost 8-pin Mini-DIP

Timing Generator for LCD Panels

Description The CXD2436Q is a timing signal generator for the VGA LCD panel LCX012 driver. This chip has a built-in serial interface circuit which allows the mode to be switched with respect to various VGA signals through direct control from an external microcomputer, etc. Features • Generates

Battery ID/Monitor Chip

DESCRIPTION The DS2436 Battery Identification/Monitor Chip provides a convenient method of tagging and identifying battery packs, by manufacturer, chemistry, or other identifying parameters. The DS2436 allows the battery pack to be coded with a unique 64-Bit ROM ID and a 16-Bit Manufactur

COUNTDOWN POWER TIMER

FEATURES ■ 28 V/400 mA Output Switch ■ Low-Cost Ceramic Timing Capacitor ■ Dual-Mode Timing Operation ■ -40°C to + 85°C Operation ■ 10 V to 16 V Operation ■ Internal Stabilizing Regulator ■ Low-Cost 8-pin Mini-DIP