Ideal Front-End Filter for Domestic Wireless Receivers 447.7 MHz SAW Filter

The RF1408D is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide front-end selectivity in 447.7 MHz receivers. Receiver designs using this filter include superhet with 10.7 MHz or 500 kHz IF, direct conversion and superregen. Typical applications of these r

447.7 MHz SAW Filter

The RF1408D is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide front-end selectivity in 447.7 MHz receivers. Receiver designs using this filter include superhet with 10.7 MHz or 500 kHz IF, direct conversion and superregen. Typical applications of these r

SAW Filters, Notch Filters

5???ax Ron, 4-/8-Channel 짹15V/12V/짹5V Multiplexers

GENERAL DESCRIPTION The ADG1408 and ADG1409 are monolithic CMOS analog multiplexers comprising eight single channels and four differential channels, respectively. The ADG1408 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1, and A2. The ADG140

4 Ω RON, 8-Channel iCMOS Multiplexers with 1.2 V and 1.8 V JEDEC Logic Compliance

FEATURES ► 4.7 Ω maximum on resistance at 25°C at ±15 V dual supply ► 0.5 Ω typical on-resistance flatness at 25°C at ±15 V dual supply ► Fully specified at ±15 V, +12 V, and ±5 V ► VL supply for low-logic level compatibility ► 1.8 V JEDEC standard compliant (JESD8-7A) ► 1.2 V JEDEC standard

Multi-Cal-System Evaluation Module

文件：2.52946 Mbytes Page：35 Pages

4.7 OHM maximum on resistance

文件：459.14 Kbytes Page：20 Pages

4.7 OHM maximum on resistance

文件：459.14 Kbytes Page：20 Pages