VFD Driver/Controller IC

DESCRIPTION PT6318 is a Vacuum Fluorescent Display (VFD) Controller driven on a 1/8 to 1/16 duty factor housed in 52-pin plastic QFP Package. Twelve segment output lines, 8 grid output lines, 8 segment/grid output drive lines, one display memory, control circuit, key scan circuit are all incorp

VFD Driver/Controller IC

VFD Driver/Controller IC

DESCRIPTION\nPT6318 is a Vacuum Fluorescent Display (VFD) Controller driven on a 1/8 to 1/16 duty factor housed in 52-pin plastic QFP Package. Twelve segment output lines, 8 grid output lines, 8 segment/grid output drive lines, one display memory, control circuit, key scan circuit are all incorporat • CMOS Technology\n• Low Power Consumption\n• Key Scanning (12 x 4 matrix)\n• Multiple Display Modes: (12 segments, 16 digits to 20 segments, 8 digits)\n• 8-Step Dimming Circuitry\n• LED Ports Provided (5 channels, 20 mA max.)\n• 4- Bits General Purpose Input Ports Provided\n• Serial Interface for C;

VFD Driver/Controller IC

DESCRIPTION PT6318 is a Vacuum Fluorescent Display (VFD) Controller driven on a 1/8 to 1/16 duty factor housed in 52-pin plastic QFP Package. Twelve segment output lines, 8 grid output lines, 8 segment/grid output drive lines, one display memory, control circuit, key scan circuit are all incorp

5-Pin 關P Supervisory Circuits with Watchdog and Manual Reset

General Description The MAX6316–MAX6322 family of microprocessor (µP) supervisory circuits monitors power supplies and microprocessor activity in digital systems. It offers several combinations of push/pull, open-drain, and bidirectional (such as Motorola 68HC11) reset outputs, along with watchdo

LOW CURRENT, HIGH GAIN OPTOCOUPLER

DESCRIPTION Very high current ratio together with 2500 VAC isolation are achieved by coupling an LED with an integrated high gain photodetector in a SOIC-8 package. Separate pins for the photodiode and output stage enable TTL compatible saturation voltages with high speed operation. Photodarlingt

LOW CURRENT, HIGH GAIN OPTOCOUPLER

DESCRIPTION Very high current ratio together with 2500 VAC isolation are achieved by coupling an LED with an integrated high gain photodetector in a SOIC-8 package. Separate pins for the photodiode and output stage enable TTL compatible saturation voltages with high speed operation. Photodarlingt

Dual P-Channel 1.8V PowerTrench Specified MOSFET

文件：165.22 Kbytes Page：5 Pages

Dual P-Channel 1.8V PowerTrench Specified MOSFET

文件：165.22 Kbytes Page：5 Pages