Solid State Battery GuardS

A Wide Range of Features There are six units in the range from 10A to 200A. The 10A and 20A unit offer a simple inline system, usually wired to a specific piece of equipment. These units do not require chassis mounting and simply connect and tie wrap neatly within the wiring system. The 4

PowerTector Series Low Voltage Disconnect

文件：172.25 Kbytes Page：2 Pages

Pressure Transmitter – With Current Output (2-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Accuracy hardly affected by temperature within entire range ‐40…+125°C ■Excellent EMC properties ■Patented medium stop system, leakage protection in case of a burst ■Pressure range 0…400 bar

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Accuracy hardly affected by temperature within entire range ‐40…+125°C ■Excellent EMC properties ■Pressure range 0…400 bar rel. Functional principle The pressure transmitters of the PT…-1 ser

Pressure Transmitter – With Current Output (2-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Accuracy hardly affected by temperature within entire range ‐40…+125°C ■Excellent EMC properties ■Pressure range 0…400 bar rel. Functional principle The pressure transmitters of the PT…-1 ser

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Accuracy hardly affected by temperature within entire range ‐40…+125°C ■Excellent EMC properties ■Pressure range 0…400 bar rel. Functional principle The pressure transmitters of the PT…-1 s

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully wel

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Calibration certificate ■7…33 VDC ■Analog output 4…20 mA ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product serie

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Calibration certificate ■7…33 VDC ■Analog output 4…20 mA ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product serie

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal me

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 produ

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 produ

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 Functional principle The pressure se

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 Functional principle The pressure se

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 Functional pri

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■10…30 VDC ■Analog output 4…20 mA ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 ■ATEX, IECEx ■Category II 1/2 GD, Ex

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection R 1/4 male thread EN 10226 ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection R 1/4 male thread EN 10226 ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 9/16-18 UNF (SAE) male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operat

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…400 bar rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 9/16-18 UNF (SAE) male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operat

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 produc

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 produc

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 produc

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 produc

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 produc

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■10…30 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 ■ATEX, IECEx ■Category II 1/2 GD, Ex zone 0 Functional principle The pressure sensors in the PT…‐2000 produc

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■10…30 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 ■ATEX, IECEx ■Category II 1/2 GD, Ex zone 0 Functional principle The pressure sensors in the PT…‐2000 produc

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■10…30 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 ■ATEX, IECEx ■Category II 1/2 GD, Ex zone 0 Functional principle The pressure sensors in the PT…‐2000 produc

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■10…30 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 ■ATEX, IECEx ■Category II 1/2 GD, Ex zone 0 Functional principle The pressure sensors in the PT…‐2000 produc

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 Functional prin

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 Functional prin

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 Functional prin

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 Functional prin

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M1

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M1

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M1

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M1

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M1

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M1

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection R 1/4 male thread EN 10226 ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate w

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection R 1/4 male thread EN 10226 ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection R 1/4 male thread EN 10226 ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/8'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 Functional prin

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Optimized for oxygen applications ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/8'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connecto

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Optimized for oxygen applications ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/8'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connecto

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Optimized for oxygen applications ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/8'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connecto

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■10…30 VDC ■Analog output 4…20 mA ■Process connection G1/8'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 ■ATEX, IECEx ■Category II 1/2 GD, Ex z

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■10…30 VDC ■Analog output 4…20 mA ■Process connection G1/8'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 ■ATEX, IECEx ■

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■Pressure peak orifice ■10…30 VDC ■Analog output 4…20 mA ■Process connection G1/8'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 × 1 ■ATEX, IECEx ■

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…40 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/8-27 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a