铂电阻

• 温度范围广 从-70℃至1000℃\n• 长期稳定性好 200℃下运行5年后的电阻的变化通常低于0.05 %。\n• 批次一致性好 不同批次产品可以互换，无需更改电路\n• 环境适应性好 特殊的陶瓷结构保护，不易受环境污染干扰;

Solid State Battery GuardS

A Wide Range of Features There are six units in the range from 10A to 200A. The 10A and 20A unit offer a simple inline system, usually wired to a specific piece of equipment. These units do not require chassis mounting and simply connect and tie wrap neatly within the wiring system. The 4

PowerTector Series Low Voltage Disconnect

文件：172.25 Kbytes Page：2 Pages

Programmable solenoid controller

Pressure Transmitter – With Current Output (2-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Minimum influence of temperature on accuracy within the entire temperature range of -40…+125°C ■Excellent EMC properties ■Pressure range 0…2000 psi rel. Functional principle The pressure tran

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Minimum influence of temperature on accuracy within the entire temperature range of -40…+125°C ■Excellent EMC properties ■Pressure range 0…2000 psi rel. Functional principle The pressure tran

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…2000 psi rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal m

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…2000 psi rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal m

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…2000 psi rel. ■10…30 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 ■ATEX, IECEx ■Category II 1/2 GD, Ex zone 0 Functional principle The pressure sensors in the PT…‐2000 prod

压力传感器

• 全焊接金属测量元件\n• 压力范围0…2000 psi（相对值）\n• 10…30 VDC\n• 模拟量输出4…20 mA\n• 采用1/4\"-18 NPT外螺纹的工艺连接件\n• 插入式器件，M12 × 1\n\n;

压力传感器

• 全焊接金属测量元件\n\n• 压力范围0…2000 psi（相对值）\n\n• 孔板压力峰值\n\n• 12…33 VDC\n\n• 模拟输出0…10 V\n\n• 采用1/4\"-18 NPT外螺纹的工艺连接件\n\n• 插入式器件，DIN EN 175301-803-A;

2.2W횞2 Class-D Audio Power Amp. 2.2W횞2 Class-D Audio Power Amp. with Headphone Output

DESCRIPTION The PT2001 is a Class-D power amplifier designed for audio equipments, maximum output power can reach up to 2.2W x 2 (VDD= 5V, RL= 4Ω, THD= 10). The PT2001 composed of exclusively designed Class-D circuitry (patented) by PTC, along with the most advanced semi-conductor technology. Whe

2.2W횞2 Class-D Audio Power Amp. 2.2W횞2 Class-D Audio Power Amp. with Headphone Output

DESCRIPTION The PT2001 is a Class-D power amplifier designed for audio equipments, maximum output power can reach up to 2.2W x 2 (VDD= 5V, RL= 4Ω, THD= 10). The PT2001 composed of exclusively designed Class-D circuitry (patented) by PTC, along with the most advanced semi-conductor technology. Whe

3CH, 2.2W, Class-D Audio Power Amplifier

DESCRIPTION The PT2002 is a Class-D power amplifier designed for audio equipments, maximum output power can reach up to 2.2W x 3CH (VDD = 5V, RL = 4Ω, THD = 10). The PT2002 composed of exclusively designed Class-D circuitry (patented) by PTC, along with the most advanced semi-conductor technology

3CH, 2.2W, Class-D Audio Power Amplifier

DESCRIPTION The PT2002 is a Class-D power amplifier designed for audio equipments, maximum output power can reach up to 2.2W x 3CH (VDD = 5V, RL = 4Ω, THD = 10). The PT2002 composed of exclusively designed Class-D circuitry (patented) by PTC, along with the most advanced semi-conductor technology

2.2W x 2 Class-D Audio Power Amplifier

DESCRIPTION The PT2004 is a CLASS-D power amplifier designed for audio equipments, maximum output power can reach up to 2.2W x 2 (VDD=5V, RL=4Ω, THD=10). The PT2004 composed of exclusively designed CLASS-D circuitry (patented) by PTC, along with the most advanced semi-conductor fabricate technolo

2.2W x 2 Class-D Audio Power Amplifier

DESCRIPTION The PT2004 is a CLASS-D power amplifier designed for audio equipments, maximum output power can reach up to 2.2W x 2 (VDD=5V, RL=4Ω, THD=10). The PT2004 composed of exclusively designed CLASS-D circuitry (patented) by PTC, along with the most advanced semi-conductor fabricate technolo

200竊?Avg 1600 竊턮lts

DIODE 200A Avg 1600 Volts

Diode

DIODE 200A Avg 1600 Volts

Diode

DIODE 200A Avg 800 Volts

200竊?Avg 800 竊턮lts

DIODE 200A Avg 800 Volts

Diode

DIODE 200A Avg 1600 Volts

Diode

DIODE 200A Avg 1800 Volts

Diode

DIODE 200A Avg 800 Volts

Pressure Transmitter – With Current Output (2-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Minimum influence of temperature on accuracy within the entire temperature range of -40…+125°C ■Excellent EMC properties ■Pressure range 0…200 psi rel. Functional principle The pressure trans

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Compact and robust design ■Pressure connection with integrated peak pressure aperture ■Minimum influence of temperature on accuracy within the entire temperature range of -40…+125°C ■Excellent EMC properties ■Pressure range 0…200 psi rel. Functional principle The pressure trans

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…200 psi rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal me

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…200 psi rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal me

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…200 psi rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal me

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…200 psi rel. ■10…30 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 ■ATEX, IECEx ■Category II 1/2 GD, Ex zone 0 Functional principle The pressure sensors in the PT…‐2000 produ

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…200 psi rel. ■12…33 VDC ■Analog output 0…10 V ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with a fully welded metal me

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…200 psi rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 7/16 UNF (SAE) male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate w

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…200 psi rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 7/16 UNF (SAE) male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate w

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…200 psi rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection R 1/4 male thread EN 10226 ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…200 psi rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection R 1/4 male thread EN 10226 ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…200 psi rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 9/16-18 UNF (SAE) male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operat

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…200 psi rel. ■Pressure peak orifice ■7…33 VDC ■Analog output 4…20 mA ■Process connection 9/16-18 UNF (SAE) male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operat

DIODE MODULE 200A/1200V/1600V

DIODE MODULE 200A/1200V/1600V FEATURES * Isolated Base * 3 Phase Bridge Circuit * Designed Power Circuit Board * High Surge Capability * UL Recognized, File No. E187184 TYPICAL APPLICATIONS * Rectified For General Use

DIODE MODULE 200A/1200V/1600V

DIODE MODULE 200A/1200V/1600V FEATURES * Isolated Base * 3 Phase Bridge Circuit * Designed Power Circuit Board * High Surge Capability * UL Recognized, File No. E187184 TYPICAL APPLICATIONS * Rectified For General Use

DIODE MODULE 200A/800V

FEATURES * Isolated Base * 3 Phase Bridge Circuit * Designed Power Circuit Board * High Surge Capability * UL Recognized, File No. E187184 TYPICAL APPLICATIONS * Rectified For General Use

Solid State Battery GuardS

A Wide Range of Features There are six units in the range from 10A to 200A. The 10A and 20A unit offer a simple inline system, usually wired to a specific piece of equipment. These units do not require chassis mounting and simply connect and tie wrap neatly within the wiring system. The 4

封装/外壳：模块 包装：管件 描述：DIODE MODULE 3PHASE 1.6KV 200A 分立半导体产品 二极管 - 桥式整流器

DIODE

文件：325.11 Kbytes Page：2 Pages

封装/外壳：模块 包装：管件 描述：DIODE MODULE 3PHASE 0.8KV 200A 分立半导体产品 二极管 - 桥式整流器

DIODE

文件：327.76 Kbytes Page：2 Pages

Diode

文件：228.18 Kbytes Page：4 Pages

200A Avg 1200~1600 Volts

文件：123.07 Kbytes Page：2 Pages

200A Avg 1200~1600 Volts

文件：123.07 Kbytes Page：2 Pages

DIODE

文件：690.24 Kbytes Page：2 Pages

DIODE

文件：125.57 Kbytes Page：2 Pages

HIGH POWER SWITCHING USE INSULATED TYPE

HIGH POWER SWITCHING USE INSULATED TYPE • IC Collector current ........................ 200A • VCEX Collector-emitter voltage ........... 600V • hFE DC current gain............................... 75 • Insulated Type • UL Recognized Yellow Card No. E80276 (N) File No. E80271 APPLICATION

HIGH POWER SWITCHING USE NON-INSULATED TYPE

HIGH POWER SWITCHING USE NON-INSULATED TYPE • IC Collector current ........................ 200A • VCEX Collector-emitter voltage ........... 350V • hFE DC current gain............................. 100 • Non-Insulated Type APPLICATION Robotics, Welders, Forklifts, Golf cart

HIGH POWER GENERAL USE INSULATED TYPE

HIGH POWER GENERAL USE INSULATED TYPE • IT (AV) Average on-state current .......... 200A • IF (AV) Average forward current .......... 200A • VRRM Repetitive peak reverse voltage .......... 400/800/1200/1600V • VDRM Repetitive peak off-state voltage .......... 400/800/1200/1600V • MIX DOUBLE A

HIGH POWER GENERAL USE INSULATED TYPE

HIGH POWER GENERAL USE INSULATED TYPE • IT (AV) Average on-state current .......... 200A • VRRM Repetitive peak reverse voltage ........ 400/800/1200/1600V • VDRM Repetitive peak off-state voltage ........ 400/800/1200/1600V • DOUBLE ARMS • Insulated Type • UL Recognized Yellow Card No.

HIGH POWER GENERAL USE INSULATED TYPE

HIGH POWER GENERAL USE INSULATED TYPE • IT (AV) Average on-state current .......... 200A • IF (AV) Average forward current .......... 200A • VRRM Repetitive peak reverse voltage .......... 400/800/1200/1600V • VDRM Repetitive peak off-state voltage .......... 400/800/1200/1600V • MIX DOUBLE A