ICs for Communications (Advanced CMOS Frame Aligner)

Introduction The Advanced CMOS Frame Aligner PEB 2035 (ACFA) is a monolithic CMOS device which implements the interface to primary rate PCM carriers. It may be programmed to operate in 24- channel (T1) and 32-channel (CEPT) carrier systems. Features Serial Interface to Line Interface Unit ● Fr

ICs for Communications (Advanced CMOS Frame Aligner)

ICs for Communications (Advanced CMOS Frame Aligner)

Introduction The Advanced CMOS Frame Aligner PEB 2035 (ACFA) is a monolithic CMOS device which implements the interface to primary rate PCM carriers. It may be programmed to operate in 24- channel (T1) and 32-channel (CEPT) carrier systems. Features Serial Interface to Line Interface Unit ● Fr

ICs for Communications (Advanced CMOS Frame Aligner)

Introduction The Advanced CMOS Frame Aligner PEB 2035 (ACFA) is a monolithic CMOS device which implements the interface to primary rate PCM carriers. It may be programmed to operate in 24- channel (T1) and 32-channel (CEPT) carrier systems. Features Serial Interface to Line Interface Unit ● Fr

2035 Step Motor Drive Full & Half Stepping 2.0 amps, 35 VDC

Features • DC bus voltage 12-35 VDC motor supply (including ripple) • Switch selectable motor current from 0.125–2.0 amps/phase • Switch selectable full or half step • Switch selectable idle current reduction, 0 or 50 • Optically isolated 5–24 VDC inputs for step, direction and enable •

Si-100 Motor Control

Features • Programmable for stand alone operation with Applied Motion’s easy to use Si Programmer™ Windows software (software and programming cable included) • Can be operated in real time from a host PC or PLC using Applied Motion’s Si Command Language ™ (SCL) • Can be networked with all

Miniature Double Banana Shorting Bar Plug

文件：40.23 Kbytes Page：1 Pages

SPACERS , STANDOFFS

文件：297.49 Kbytes Page：1 Pages

DC Full/Half Step Drive

文件：209.87 Kbytes Page：4 Pages