包装：散装 描述：THE PANDUIT PANEL EXTENDER BRACK 盒子，外壳，机架 机架配件

包装：盒 描述：THE PANDUIT PANEL EXTENDER BRACK 盒子，外壳，机架 机架配件

Mini-Com짰 Modular Patch Panels with Faceplates

文件：735.58 Kbytes Page：3 Pages

ISDN DC Converter Circuit IDCC

Overview The PEB/F 2023 is a pulse width modulator circuit designed for fixed-frequency switching regulators with very low power consumption. In telephone and ISDN-systems a high conversion yield is crucial to maintain functionality in all supply conditions via S- or U-interfaces. The PEB/F 2023

ISDN Exchange Power Controller

Features ● Supplies power to up to four transmission lines ● CCITT recommendations compatible for power feed at the “S” interface ● Each line is individually powered and controlled ● Wide field of applications: – two- and four wire transmission lines – point-to-point configurations

ISDN Exchange Power Controller

Features ● Supplies power to up to four transmission lines ● CCITT recommendations compatible for power feed at the “S” interface ● Each line is individually powered and controlled ● Wide field of applications: – two- and four wire transmission lines – point-to-point configurations

ISDN Exchange Power Controller

Features ● Supplies power to up to four transmission lines ● CCITT recommendations compatible for power feed at the “S” interface ● Each line is individually powered and controlled ● Wide field of applications: – two- and four wire transmission lines – point-to-point configurations

ICs for Communications

Introduction The Multichannel Network Interface Controller for HDLC (MUNICH32) is a Multichannel Protocol Controller, which handles up to 32 data channels of a full duplex PCM highway. It performs layer 2 HDLC formatting/deformatting or V.110 and X.30 protocols up to a network data rate of 38.4 K

Multichannel Network Interface Controller for HDLC MUNICH32X

Introduction The MUNICH32X is an enhanced version of the Multichannel Network Interface Controller for HDLC, MUNICH32 (PEB 20320, refer to the User’s Manual 01.96). Key enhancements include: • a 33 MHz/32-bit PCI bus Master/Slave interface with integrated DMA controllers for higher performance,

Multichannel Network Interface Controller for HDLC

Overview The MUNICH32X is an enhanced version of the Multichannel Network Interface Controller for HDLC, MUNICH32 (PEB 20320, refer to the User’s Manual 01.2000). Key enhancements include: • a 33 MHz/32-bit PCI bus Master/Slave interface with integrated DMA controllers for higher performance, l

ICs for Communications

Introduction The MUNICH128X is a 128-channel WAN Protocol Controller which provides four independent 24/32-channel HDLC controllers, each with a dedicated 64-channel DMA Controller and a Serial PCM Interface Controller. The device is offered in a 160- pin MQFP package, making it ideal for high-po

ICs for Communications (Advanced CMOS Frame Aligner)

Introduction The Advanced CMOS Frame Aligner PEB 2035 (ACFA) is a monolithic CMOS device which implements the interface to primary rate PCM carriers. It may be programmed to operate in 24- channel (T1) and 32-channel (CEPT) carrier systems. Features Serial Interface to Line Interface Unit ● Fr

ICs for Communications (Advanced CMOS Frame Aligner)

Introduction The Advanced CMOS Frame Aligner PEB 2035 (ACFA) is a monolithic CMOS device which implements the interface to primary rate PCM carriers. It may be programmed to operate in 24- channel (T1) and 32-channel (CEPT) carrier systems. Features Serial Interface to Line Interface Unit ● Fr

ICs for Communications (Advanced CMOS Frame Aligner)

Introduction The Advanced CMOS Frame Aligner PEB 2035 (ACFA) is a monolithic CMOS device which implements the interface to primary rate PCM carriers. It may be programmed to operate in 24- channel (T1) and 32-channel (CEPT) carrier systems. Features Serial Interface to Line Interface Unit ● Fr

Memory Time Switch CMOS (MTSC)

Features ● Time/space switch for 2048-, 4096- or 8192-kbit/s PCM systems ● Switching of up to 512 incoming PCM channels to up to 256 outgoing PCM channels ● 16-input and 8-output PCM lines ● Different kinds of modes (2048, 4096, 8192 kbit/s or mixed mode) ● Configurable for primary access and

Memory Time Switch CMOS (MTSC)

Features ● Time/space switch for 2048-, 4096- or 8192-kbit/s PCM systems ● Switching of up to 512 incoming PCM channels to up to 256 outgoing PCM channels ● 16-input and 8-output PCM lines ● Different kinds of modes (2048, 4096, 8192 kbit/s or mixed mode) ● Configurable for primary access and

Memory Time Switch CMOS (MTSC)

Features ● Time/space switch for 2048-, 4096- or 8192-kbit/s PCM systems ● Switching of up to 512 incoming PCM channels to up to 256 outgoing PCM channels ● 16-input and 8-output PCM lines ● Different kinds of modes (2048, 4096, 8192 kbit/s or mixed mode) ● Configurable for primary access and

Memory Time Switch Large MTSL

General Device Overview The Siemens Memory Time Switch Large MTSL (PEB 2047) is an expansion of the MTSC (PEB 2045) regarding capacity and/or functionality. It is a monolithic CMOS switching device capable of connecting maximally 1024 PCM-input time-slots to 1024 output time-slots. Features ●

Memory Time Switch Large MTSL

General Device Overview The Siemens Memory Time Switch Large MTSL (PEB 2047) is an expansion of the MTSC (PEB 2045) regarding capacity and/or functionality. It is a monolithic CMOS switching device capable of connecting maximally 1024 PCM-input time-slots to 1024 output time-slots. Features ●

Peripheral Board Controller(PBC)

Peripheral Board Controller (PBC)

Peripheral Board Controller(PBC)

Peripheral Board Controller (PBC)

Peripheral Board Controller(PBC)

Peripheral Board Controller (PBC)

Peripheral Board Controller(PBC)

Peripheral Board Controller (PBC)

2 Channel Serial Optimized Communication Controller for HDLC/PPP

Introduction The SEROCCO-H is a Serial Communication Controller with two independent serial channels1). The serial channels are derived from updated protocol logic of the ESCC and DSCC4 device family providing a large set of protocol support and variety in serial interface configuration. This all

2 Channel Serial Optimized Communication Controller

Introduction The SEROCCO-M is a Serial Communication Controller with two independent serial channels1). The serial channels are derived from updated protocol logic of the ESCC and DSCC4 device family providing a large set of protocol support and variety in serial interface configuration. This a

DMA Supported Serial Communication Controller with 4 Channels DSCC4

Overview The DSCC4 is a DMA Supported Serial Communication Controller with four independent serial channels1). The serial channels are derived from updated protocol logic of the ESCC device family providing a large set of protocol support and variety in serial interface configuration. This allows

DMA Supported Serial Communication Controller with 4 Channels

Overview The DSCC4 is a DMA Supported Serial Communication Controller with four independent serial channels1). The serial channels are derived from updated protocol logic of the ESCC device family providing a large set of protocol support and variety in serial interface configuration. This allows

DMA Supported Serial Communication Controller with 4 Channels DSCC4

Overview The DSCC4 is a DMA Supported Serial Communication Controller with four independent serial channels1). The serial channels are derived from updated protocol logic of the ESCC device family providing a large set of protocol support and variety in serial interface configuration. This allows

DMA Supported Serial Communication Controller with 4 Channels DSCC4

Overview The DSCC4 is a DMA Supported Serial Communication Controller with four independent serial channels1). The serial channels are derived from updated protocol logic of the ESCC device family providing a large set of protocol support and variety in serial interface configuration. This allows

ICs for Communications

Overview The PEB 2055 (Extended PCM Interface Controller) is a highly integrated controller circuit optimized for analog and ISDN line card and central switches applications. The EPIC-1 provides the circuitry necessary to manage up to 32 digital (ISDN or proprietary) or 64 analog subscribers. Th

2 Channel Serial Optimized Communication Controller with DMA

Introduction The SEROCCO-D is a DMA Integrated Serial Communication Controller with two independent serial channels1). The serial channels are derived from updated protocol logic of the ESCC and DSCC4 device family providing a large set of protocol support and variety in serial interface config

ICs for Communications Extended PCM Interface Controller

Overview The PEB 2055 (Extended PCM Interface Controller) is a highly integrated controller circuit optimized for analog and ISDN line card and central switches applications. The EPIC-1 provides the circuitry necessary to manage up to 32 digital (ISDN or proprietary) or 64 analog subscribers. Fe

ICs for Communications

Overview The PEB 2055 (Extended PCM Interface Controller) is a highly integrated controller circuit optimized for analog and ISDN line card and central switches applications. The EPIC-1 provides the circuitry necessary to manage up to 32 digital (ISDN or proprietary) or 64 analog subscribers. Th

ICs for Communications Extended PCM Interface Controller

Overview The PEB 2055 (Extended PCM Interface Controller) is a highly integrated controller circuit optimized for analog and ISDN line card and central switches applications. The EPIC-1 provides the circuitry necessary to manage up to 32 digital (ISDN or proprietary) or 64 analog subscribers. Fe

ICs for Communications

Overview The PEB 20550 (Extended Line Card Controller) is a highly integrated controller circuit optimized for line card and key system applications. It combines all functional blocks necessary to manage up to 32 digital (ISDN or proprietary) or 64 analog subscribers. The switching and layer-1 c

ICs for Communications

Introduction The DELIC and VIP chipset realizes multiple ISDN S/T and UPN interfaces together with controller functionality typically needed in PBX or Central Office systems. This functionality comprises voice channel handling, signaling control, layer-1 control, and even signal processing tasks.

DSP Embedded Line and Port Interface Controller

Introduction The DELIC and VIP chipset realizes multiple ISDN S/T and UPN interfaces together with controller functionality typically needed in PBX or Central Office systems. This functionality comprises voice channel handling, signaling control, layer-1 control, and even signal processing tasks.

DSP Embedded Line and Port Interface Controller

Addendum to “DELIC Clock System Synchronization” The DELIC Clock System Synchronization is described in the DELIC-LC PEB 20570/DELIC-PB PEB 20571 Data Sheet, independent of the version (2.1 .. 3.1). As an addendum to chapter “DELIC Clock System Synchronization” of the DELICLC/DELIC-PB Data Sheet

ICs for Communications

Introduction The DELIC and VIP chipset realizes multiple ISDN S/T and UPN interfaces together with controller functionality typically needed in PBX or Central Office systems. This functionality comprises voice channel handling, signaling control, layer-1 control, and even signal processing tasks.

DSP Embedded Line and Port Interface Controller

Addendum to “DELIC Clock System Synchronization” The DELIC Clock System Synchronization is described in the DELIC-LC PEB 20570/DELIC-PB PEB 20571 Data Sheet, independent of the version (2.1 .. 3.1). As an addendum to chapter “DELIC Clock System Synchronization” of the DELICLC/DELIC-PB Data Sheet

ICs for Communications Extended PCM Interface Controller

Overview The PEB 2055 (Extended PCM Interface Controller) is a highly integrated controller circuit optimized for analog and ISDN line card and central switches applications. The EPIC-1 provides the circuitry necessary to manage up to 32 digital (ISDN or proprietary) or 64 analog subscribers. Fe

S/T Bus Interface Circuit (SBC)

The S-Bus Interface Circuit (SBC) PEx 2080 implements the four-wire S/T-interface used to link voice/data terminals to an ISDN. Through selection of operating mode, the device may be employed in all types of applications involving an S interface. Two or more SBC´s can be used to build a point to-p

Quadruple Transceiver for S/T Interface QUAT-S

Overview The PEB 2084, Quadruple Transceiver for S/T Interfaces (QUAT-S), implements four wire S/T interfaces used to link voice/data digital terminals to PBX subscriber lines and PBX trunk lines to the public ISDN. The QUAT-S is an optimized device for PBX applications but can also be used in

ICs for Communications Extended PCM Interface Controller

Overview The PEB 2055 (Extended PCM Interface Controller) is a highly integrated controller circuit optimized for analog and ISDN line card and central switches applications. The EPIC-1 provides the circuitry necessary to manage up to 32 digital (ISDN or proprietary) or 64 analog subscribers. Fe

Quadruple Transceiver for S/T Interface QUAT-S

Overview The PEB 2084, Quadruple Transceiver for S/T Interfaces (QUAT-S), implements four wire S/T interfaces used to link voice/data digital terminals to PBX subscriber lines and PBX trunk lines to the public ISDN. The QUAT-S is an optimized device for PBX applications but can also be used in

ISDN SubscribernAccess Controller

Introduction The PEB 2085/2086 ISAC®-S implements the four-wire S/T interface used to link voice/data terminals to an ISDN. The PEB 2085 combines the functions of the S-Bus Interface Circuit (SBC: PEB 2080) and the ISDN Communications Controller (ICC: PEB 2070) on one chip. The component swit

ISDN SubscribernAccess Controller

Introduction The PEB 2085/2086 ISAC®-S implements the four-wire S/T interface used to link voice/data terminals to an ISDN. The PEB 2085 combines the functions of the S-Bus Interface Circuit (SBC: PEB 2080) and the ISDN Communications Controller (ICC: PEB 2070) on one chip. The component swit

ISDN SubscribernAccess Controller

Introduction The PEB 2085/2086 ISAC®-S implements the four-wire S/T interface used to link voice/data terminals to an ISDN. The PEB 2085 combines the functions of the S-Bus Interface Circuit (SBC: PEB 2080) and the ISDN Communications Controller (ICC: PEB 2070) on one chip. The component swit

ISDN SubscribernAccess Controller

Introduction The PEB 2085/2086 ISAC®-S implements the four-wire S/T interface used to link voice/data terminals to an ISDN. The PEB 2085 combines the functions of the S-Bus Interface Circuit (SBC: PEB 2080) and the ISDN Communications Controller (ICC: PEB 2070) on one chip. The component swit

ICs for Communications Extended PCM Interface Controller

Overview The PEB 2055 (Extended PCM Interface Controller) is a highly integrated controller circuit optimized for analog and ISDN line card and central switches applications. The EPIC-1 provides the circuitry necessary to manage up to 32 digital (ISDN or proprietary) or 64 analog subscribers. Fe

ICs for Communications

Introduction The Smart Integrated Digital Echo Canceller (SIDEC) suppresses echoes in telecommunication networks which might disturb any kind of terrestrial or wireless communication. It incorporates leading edge CMOS technology as well as INFINEON’s many years experience in Telecommunication ICs

Smart Integrated Digital Echo Canceller

Introduction The Smart Integrated Digital Echo Canceller (SIDEC) suppresses echoes in telecommunication networks which might disturb any kind of terrestrial or wireless communication. It incorporates leading edge CMOS technology as well as INFINEON’s many years experience in Telecommunication ICs

Octal Transceiver for UPN Interfaces OCTAT-P

Overview A Line Card or a PBX consists of a line card controller, multiple layer-1 transceivers for t/r (a/b), S/T, UP and U2B1Q interfaces, signaling controllers, a microprocessor, memory, power supply, transformers, etc. The new Siemens generation of highly integrated ISDN circuits enables desi

ICs for Communications

Overview The PEB 2055 (Extended PCM Interface Controller) is a highly integrated controller circuit optimized for analog and ISDN line card and central switches applications. The EPIC-1 provides the circuitry necessary to manage up to 32 digital (ISDN or proprietary) or 64 analog subscribers. Fe

ICs for Communications Extended PCM Interface Controller

Overview The PEB 2055 (Extended PCM Interface Controller) is a highly integrated controller circuit optimized for analog and ISDN line card and central switches applications. The EPIC-1 provides the circuitry necessary to manage up to 32 digital (ISDN or proprietary) or 64 analog subscribers. Fe

Primary Rate Access Clock Generator and Transceiver PRACT

The Primary Rate Access Clock Generator and Transceiver PRACT (PEB 22320) is a monolithic CMOS device which implements the analog receive and transmit line interface functions to primary rate PCM carriers. It may be programmed or hard wired to operate in 1.544-Mbit/s (T1) or 2.048-Mbit/s (CEPT) ca

Primary Rate Access Clock Generator and Transceiver PRACT

The Primary Rate Access Clock Generator and Transceiver PRACT (PEB 22320) is a monolithic CMOS device which implements the analog receive and transmit line interface functions to primary rate PCM carriers. It may be programmed or hard wired to operate in 1.544-Mbit/s (T1) or 2.048-Mbit/s (CEPT) ca

Multipoint Switching and Conferencing Unit - Attenuation MUSAC

Device Overview The Multipoint Switching and Conferencing Unit (MUSAC) combines a time switch unit (MTSC) and a powerful signal processor on one chip. The MUSAC enhances the capabilities of a PBX by supporting teleconferencing and multipoint data communication over voiceband channels. Digital sig

multipoint switching and conferencing unit (musac)

General Description The Multipoint Switching and Conferencing Unit (MUSAC) combines a time switch unit MTSC PEB 2045 and a powerful signal processor on one chip. The MUSAC enhances the capabilities of a PBX by supporting teleconferencing and multipoint data communication over voiceband channels.

Two Channel Codec Filter with IOM짰-2 Interface (IOM짰-2 - SICOFI짰-2)

Overview The two Channel Codec Filter PEB 2265 IOM-2 – SICOFI-2 is the logic continuation of a well-established family of Siemens Codec-Filter-ICs. The IOM-2 – SICOFI-2 is a fully integrated PCM codec and filter fabricated in low power 1 µm CMOS technology for applications in digital communicati