Bulkhead Mount 75 Ohm Mini SMB Jack to 75 Ohm Mini SMB Jack Adapter

Bulkhead Mount 75 Ohm Mini SMB Jack to 75 Ohm Mini SMB Jack Adapter\n\nMini SMB adapter PE9611 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our Mini SMB to Mini SMB adapter is a in-series coaxial adapter design. This 75 Ohm Mini SMB adapter is precisi Key Specifications (Click on Data Sheet Above for Additional Details).\n• Connector Gender 1Jack\n• Connector Impedance 175 Ohm\n• Connector Gender 2Jack\n• Connector Impedance 275 Ohm\n• Connector Mount Method 1Bulkhead\n• Connector Body Plating 1Gold\n• Connector Body Material 2Brass\n• Connector ;

Bulkhead 75 Ohm Mini SMB Jack to Mini SMB Jack Adapter

文件：260.89 Kbytes Page：3 Pages

PWM POWER MOS CONTROLLER

DESCRIPTION The L9610C/11C is a monolithic integrated circuit working in PWM mode as controller of an external powerMOS transistor in High Side Driver configuration. Features of the device include controlled slope of the leading and trailing edge of the gate driving voltage,linear current limiti

PWM POWER MOS CONTROLLER

DESCRIPTION The L9610C/11C is a monolithic integrated circuit working in PWM mode as controller of an external powerMOS transistor in High Side Driver configuration. Features of the device include controlled slope of the leading and trailing edge of the gate driving voltage,linear current limiti

HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER

DESCRIPTION The PS9611 and PS9611L are optically coupled high-speed, totem-pole output isolators containing a GaAlAs LED on light emitting diode (input side) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip. The PS9611 is in a plastic DIP (Dual I

HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER

DESCRIPTION The PS9611 and PS9611L are optically coupled high-speed, totem-pole output isolators containing a GaAlAs LED on light emitting diode (input side) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip. The PS9611 is in a plastic DIP (Dual I

FOUR-CHANNEL PCM CODEC

文件：161.86 Kbytes Page：28 Pages