SMB PLUG RIGHT ANGLE CONNECTOR CLAMP/SOLDER ATTANCHMENT FOR RG174 RG316 RG188

SMB Plug Right Angle Connector Clamp/Solder Attachment For RG174, RG316, RG188 SMB Plug Right Angle Connector Clamp/Solder Attachment For RG174, RG316, RG188 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products mai

SP4T UltraCMOS??2.6 V Switch 100 - 3000 MHz

Product Description The PE4261 SP4T RF UltraCMOS™ Flip Chip Switch is designed specifically to address the needs of the antenna switch module market for GSM Handsets. On-chip CMOS decode logic is used to facilitate two-pin, low voltage CMOS control inputs. High ESD tolerance of 1500 V at all port

SP4T UltraCMOS??2.6 V Switch 100 - 3000 MHz

Product Description The PE4261 SP4T RF UltraCMOS™ Flip Chip Switch is designed specifically to address the needs of the antenna switch module market for GSM Handsets. On-chip CMOS decode logic is used to facilitate two-pin, low voltage CMOS control inputs. High ESD tolerance of 1500 V at all port

SP4T UltraCMOS 2.6 V Switch 100 - 3000 MHz

Product Description The PE42612 SP4T RF UltraCMOS™ Flip Chip Switch is designed specifically to address the needs of the antenna switch module market for GSM Handsets. On-chip CMOS decode logic is used to facilitate two-pin, low voltage CMOS control inputs. High ESD tolerance of 1500 V at all por

SP4T UltraCMOS 2.6 V Switch 100 - 3000 MHz

Product Description The PE42612 SP4T RF UltraCMOS™ Flip Chip Switch is designed specifically to address the needs of the antenna switch module market for GSM Handsets. On-chip CMOS decode logic is used to facilitate two-pin, low voltage CMOS control inputs. High ESD tolerance of 1500 V at all por

SP4T UltraCMOS 2.6 V Switch 100 - 3000 MHz

Product Description The PE42612 SP4T RF UltraCMOS™ Flip Chip Switch is designed specifically to address the needs of the antenna switch module market for GSM Handsets. On-chip CMOS decode logic is used to facilitate two-pin, low voltage CMOS control inputs. High ESD tolerance of 1500 V at all por

SP4T UltraCMOS 2.6 V Switch 100 - 3000 MHz

Product Description The PE42612 SP4T RF UltraCMOS™ Flip Chip Switch is designed specifically to address the needs of the antenna switch module market for GSM Handsets. On-chip CMOS decode logic is used to facilitate two-pin, low voltage CMOS control inputs. High ESD tolerance of 1500 V at all por

SP4T UltraCMOS??2.6 V Switch 100 - 3000 MHz

Product Description The PE4261 SP4T RF UltraCMOS™ Flip Chip Switch is designed specifically to address the needs of the antenna switch module market for GSM Handsets. On-chip CMOS decode logic is used to facilitate two-pin, low voltage CMOS control inputs. High ESD tolerance of 1500 V at all port

SP4T UltraCMOS??2.6 V Switch 100 - 3000 MHz

Product Description The PE4261 SP4T RF UltraCMOS™ Flip Chip Switch is designed specifically to address the needs of the antenna switch module market for GSM Handsets. On-chip CMOS decode logic is used to facilitate two-pin, low voltage CMOS control inputs. High ESD tolerance of 1500 V at all port

SMC Plug Right Angle Connector Clamp/Solder Attachment For RG174, RG316, RG188

Description Pasternack’s PE4262 SMC plug right angle connector with clamp/solder attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100 and 0.100 inch is part of our full line of RF components available for same-day shipping. Our SMC plug connector operates up to a maximum frequency of 10

SMC Plug Right Angle Connector Clamp/Solder Attachment For RG178, RG196

SMC Plug Right Angle Connector Clamp/Solder Attachment For RG178, RG196 SMC Plug Right Angle Connector Clamp/Solder Attachment For RG178, RG196 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99 availab

SP6T UltraCMOS??2.6 V Switch 100 - 3000 MHz

Product Description The PE4263 SP6T RF UltraCMOS™ Switch addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market. On-chip CMOS decode logic facilitates three-pin low voltage CMOS control. High ESD tolerance of 1500 V at all ports, no blocking capacitor requir

SP6T UltraCMOS 2.70 V Switch 100 - 3000 MHz,50ohm

Product Description The PE42632 is a HaRP™-enhanced SP6T RF Switch developed on the UltraCMOS™ process technology. This 50 Ω switch addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market. On-chip CMOS decode logic facilitates three-pin low voltage CMOS contr

SP6T UltraCMOS 2.70 V Switch 100 - 3000 MHz,50ohm

Product Description The PE42632 is a HaRP™-enhanced SP6T RF Switch developed on the UltraCMOS™ process technology. This 50 Ω switch addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market. On-chip CMOS decode logic facilitates three-pin low voltage CMOS contr

SP6T UltraCMOS 2.70 V Switch 100 - 3000 MHz,50ohm

Product Description The PE42632 is a HaRP™-enhanced SP6T RF Switch developed on the UltraCMOS™ process technology. This 50 Ω switch addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market. On-chip CMOS decode logic facilitates three-pin low voltage CMOS contr

SP4T UltraCMOS RF Switch DC - 3.0 GHz

Product Description The PE42641 is a HaRP™-enhanced SP4T RF Switch developed on the UltraCMOS® process technology. This switch contains 4 identical WEDGE/CDMA compliant TX paths and can be used in various GSM and WCDMA mobile applications as well as other wireless applications up to 3000 MHz. I

SP4T UltraCMOS RF Switch DC - 3.0 GHz

Product Description The PE42641 is a HaRP™-enhanced SP4T RF Switch developed on the UltraCMOS® process technology. This switch contains 4 identical WEDGE/CDMA compliant TX paths and can be used in various GSM and WCDMA mobile applications as well as other wireless applications up to 3000 MHz. I

SP4T UltraCMOS RF Switch DC - 3.0 GHz

Product Description The PE42641 is a HaRP™-enhanced SP4T RF Switch developed on the UltraCMOS® process technology. This switch contains 4 identical WEDGE/CDMA compliant TX paths and can be used in various GSM and WCDMA mobile applications as well as other wireless applications up to 3000 MHz. I

75 Ohm SMB Plug Right Angle Connector Clamp/ Solder Attachment For RG180, RG195

Configuration Connector SMB Plug Connector Interface Type RG180,RG195 Cable Attachment Method (Shield/Contact) Clamp/Solder Body Style Right Angle

Wideband support up to 60 GHz

Product Description The PE426525 is a HaRP™ technology-enhanced reflective SPDT RF switch die that supports a wide frequency range from 9 kHz to 60 GHz. This wideband flip-chip switch is pin compatible to the PE42524 and the PE42525. It delivers low insertion loss, fast switching time and high is

Wideband support up to 60 GHz

Product Description The PE426525 is a HaRP™ technology-enhanced reflective SPDT RF switch die that supports a wide frequency range from 9 kHz to 60 GHz. This wideband flip-chip switch is pin compatible to the PE42524 and the PE42525. It delivers low insertion loss, fast switching time and high is

75 Ohm SMC Plug Right Angle Connector Clamp/ Solder Attachment For RG59, RG62

Configuration Connector SMC Plug Connector Interface Type RG59,RG62 Cable Attachment Method (Shield/Contact) Clamp/Solder Body Style Right Angle

SP6T UltraCMOS2.75 V Switch 100 - 3000 MHz

Product Description The PE42660 is a HaRP™-enhanced SP6T RF Switch developed on the UltraCMOS™ process technology. It addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market. On-chip CMOS decode logic facilitates three-pin low voltage CMOS control, while high

75 Ohm SMC Plug Right Angle Connector Clamp/ Solder Attachment For RG180, RG195

Configuration Connector SMC Plug Connector Interface Type RG180,RG195 Cable Attachment Method (Shield/Contact) Clamp/Solder Body Style Right Angle

SP7T UltraCMOS 2.75 V Switch 100 - 3000 MHz, 68 dBm IIP3

Product Description The PE42671 is a HaRP™-enhanced SP7T RF Switch developed on the UltraCMOS™ process technology. It addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market for use in GSM/PCS/EDGE/WCDMA handsets. The switch is comprised of two transmit ports

SP7T UltraCMOS??2.75 V Switch 100 - 3000 MHz, 68 dBM IIP3

Product Description The PE42672 is a HaRP™-enhanced SP7T RF Switch developed on the UltraCMOS™ process technology. It addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market for use in GSM/EDGE/PCS/DCS/WCDMA handsets. The switch is comprised of three TX ports

SP6T UltraCMOS??2.6 V Switch 100 - 3000 MHz

Product Description The PE4268 SP6T RF UltraCMOS™ Switch addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market. Broadband performance also makes it a versatile solution in other IF and RF applications. The switch includes two high power paths with low inser

SMB Jack Connector Clamp/Solder Attachment For RG174, RG316, RG188

Description Pasternack’s PE4268 SMB jack connector with clamp/solder attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0.100 inch and LMR-100 is part of our full line of RF components available for same-day shipping. Our SMB jack connector PE4268 datasheet specifications and drawing with dim

SP6T UltraCMOS??2.6 V Switch 100 - 3000 MHz

Product Description The PE4268 SP6T RF UltraCMOS™ Switch addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market. Broadband performance also makes it a versatile solution in other IF and RF applications. The switch includes two high power paths with low inser

SP9T UltraCMOS 2.75 V Switch 100 - 3000 MHz, 68 dBm IIP3

Product Description The PE42693 is a HaRP™-enhanced SP9T RF Switch developed on the UltraCMOS™ process technology. It addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market for use in GSM/ PCS/EDGE/DCS/WCDMA handsets. The switch is comprised of two transmit

SP9T UltraCMOS 2.75 V Switch 100 - 3000 MHz, 68 dBm IIP3

Product Description The PE42693 is a HaRP™-enhanced SP9T RF Switch developed on the UltraCMOS™ process technology. It addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market for use in GSM/ PCS/EDGE/DCS/WCDMA handsets. The switch is comprised of two transmit

SP9T UltraCMOS 2.75 V Switch 100 - 3000 MHz, 68 dBm IIP3

Product Description The PE42693 is a HaRP™-enhanced SP9T RF Switch developed on the UltraCMOS™ process technology. It addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market for use in GSM/ PCS/EDGE/DCS/WCDMA handsets. The switch is comprised of two transmit

SMB Plug Right Angle Connector Clamp/Solder Attachment

文件：327.4 Kbytes Page：2 Pages

SMB Plug Right Angle Connector Clamp/Solder Attachment

文件：327.4 Kbytes Page：2 Pages

SP4T UltraCMOS™ 2.6 V Switch 100 - 3000 MHz

SP4T UltraCMOS 2.6 V Switch 100 - 3000 MHz

SMC Plug Right Angle Connector Clamp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, 0.100 inch

SMC Plug Right Angle Connector Clamp/Solder Attachment

文件：383.24 Kbytes Page：4 Pages

SMC Plug Right Angle Connector Clamp/Solder Attachment

文件：383.24 Kbytes Page：4 Pages

75 Ohm SMB Plug Right Angle Connector Clamp - Solder Attachment For RG59, RG62

文件：218.2 Kbytes Page：2 Pages

SP4T UltraCMOS짰 RF Switch

文件：891.67 Kbytes Page：8 Pages

SP12T RF Switch, 10 MHz?? GHz

文件：1.17656 Mbytes Page：25 Pages

SP12T RF Switch, 10 MHz?? GHz

文件：1.17656 Mbytes Page：25 Pages

SP4T UltraCMOS짰 RF Switch 100 MHz ??3.0 GHz

文件：232.62 Kbytes Page：8 Pages

封装/外壳：16-WFQFN 裸露焊盘 包装：托盘 描述：IC RF SWITCH SP4T 3GHZ 16QFN RF/IF，射频/中频和 RFID 射频开关

SP4T UltraCMOS짰 RF Switch 100 MHz ??3.0 GHz

文件：232.62 Kbytes Page：8 Pages

SP6T RF Switch, 10 MHz?? GHz

文件：786.86 Kbytes Page：20 Pages

SP6T RF Switch, 10 MHz?? GHz

文件：786.86 Kbytes Page：20 Pages

Harsh industrial applications up to 8 GHz

文件：911.85 Kbytes Page：23 Pages

Harsh industrial applications up to 8 GHz

文件：911.85 Kbytes Page：23 Pages

SP3T High Power UltraCMOS RF Switch 30 MHz - 1000 MHz

文件：453.13 Kbytes Page：11 Pages

SP3T High Power UltraCMOS RF Switch 30 MHz - 1000 MHz

文件：453.13 Kbytes Page：11 Pages

SP3T High Power UltraCMOS RF Switch 30 MHz - 1000 MHz

文件：453.13 Kbytes Page：11 Pages

封装/外壳：32-VFQFN 裸露焊盘 包装：散装 描述：IC RF SWITCH SP3T 1GHZ 32QFN RF/IF，射频/中频和 RFID 射频开关

SMB Jack Connector Clamp/Solder Attachment

文件：316.58 Kbytes Page：3 Pages

SP6T UltraCMOS 2.6 V Switch

文件：308.52 Kbytes Page：11 Pages

SP6T UltraCMOS

文件：308.52 Kbytes Page：11 Pages

2.6 V Switch

文件：308.52 Kbytes Page：11 Pages

Switch

文件：308.52 Kbytes Page：10 Pages

SMB Jack Connector Clamp/Solder Attachment

文件：316.58 Kbytes Page：3 Pages