Si-100 Motor Control

Features • Programmable for stand alone operation with Applied Motion’s easy to use Si Programmer™ Windows software (software and programming cable included) • Can be operated in real time from a host PC or PLC using Applied Motion’s Si Command Language ™ (SCL) • Can be networked with all

Headphone amplifier with internal LPF and EVR for CD-ROM

The BH3540AFS is an H/P amplifier with internal secondary LPF and EVR circuits. When multibit output from a D/A converter is input, the secondary LPF outputs an audio signal. Output level for headphones can be changed with the EVR circuit. This IC also has independent internal mute circuits for th

4/5 Bit Multiplexed, 1 Bit Latched Port with Standard 2-Wire Bus Interface and Non-Volatile Latches

General Description The FM3540/60 multiplexes the I-port input signals with two internal non-volatile registers that can be loaded through the serial port. The multiplexer is selected via the serial port and defaults to the I-Port upon power-up. Pull-up resistors are provided on the input port to

35 Amp Rectifier 20 to 100 Volts Schottky Barrier

文件：115.54 Kbytes Page：2 Pages

DECT receiver

文件：68 Kbytes Page：16 Pages

DECT receiver

文件：68 Kbytes Page：16 Pages