4/5 Bit Multiplexed, 1 Bit Latched Port with Standard 2-Wire Bus Interface and Non-Volatile Latches

General Description The FM3540/60 multiplexes the I-port input signals with two internal non-volatile registers that can be loaded through the serial port. The multiplexer is selected via the serial port and defaults to the I-Port upon power-up. Pull-up resistors are provided on the input port to

4/5 Bit Multiplexed, 1 Bit Latched Port with Standard 2-Wire Bus Interface and Non-Volatile Latches

General Description The FM3540/60 multiplexes the I-port input signals with two internal non-volatile registers that can be loaded through the serial port. The multiplexer is selected via the serial port and defaults to the I-Port upon power-up. Pull-up resistors are provided on the input port to

4/5 Bit Multiplexed, 1 Bit Latched Port with Standard 2-Wire Bus Interface and Non-Volatile Latches

General Description The FM3540/60 multiplexes the I-port input signals with two internal non-volatile registers that can be loaded through the serial port. The multiplexer is selected via the serial port and defaults to the I-Port upon power-up. Pull-up resistors are provided on the input port to

4/5 Bit Multiplexed, 1 Bit Latched Port with Standard 2-Wire Bus Interface and Non-Volatile Latches

General Description The FM3540/60 multiplexes the I-port input signals with two internal non-volatile registers that can be loaded through the serial port. The multiplexer is selected via the serial port and defaults to the I-Port upon power-up. Pull-up resistors are provided on the input port to

4/5 Bit Multiplexed, 1 Bit Latched Port with Standard 2-Wire Bus Interface and Non-Volatile Latches

General Description The FM3540/60 multiplexes the I-port input signals with two internal non-volatile registers that can be loaded through the serial port. The multiplexer is selected via the serial port and defaults to the I-Port upon power-up. Pull-up resistors are provided on the input port to

Low Thermal EMF Reed Relays

LOW THERMAL EMF REED RELAYS The 3500 Series is ideally suited to the needs of Instrumentation, Data Acquisition and Process Control. The specification tables allow you to select the appropriate relay for your particular application. Recommended for use in high accuracy DVM’s, Multiplexers and Dig

Ceramic Stand-off Insulators for RF-Equipment

Ceramic Stand-off Insulators for RF-Equipment MATERIAL:    Stand - off insulator elements made from Class 1 Ceramic    material (C 221-IEC 60672-3), body completely glazed.    Connection terminals: brass OPERATING CONDITIONS:    Maximum operating temperature + 100 °C    Maximum compressive

Customer Specification

Construction 1) Component 1 10 X 1 COND a) Conductor 24 (19/36) AWG TC 0.025 b) Insulation 0.010 Wall, Nom. PVC 0.045 (1) Color(s) Cond Color Cond Color Cond Color 1 BROWN 5 GREEN 9 WHITE 2 RED 6 BLUE 10 BLACK 3 ORANGE 7 VILOET 4 YELLOW 8 SLATE 2) Cable Assembly 10 Components assemble

m廓 HiTESTER

文件：379.43 Kbytes Page：4 Pages

Precision Potentiometer

文件：211.13 Kbytes Page：2 Pages