PD42-x-1241 Hardware Manual

Features • Stepper Motor NEMA17 / 42mm • 0.4Nm or 0.8Nm holding torque • motor optimized for speed (>5k rpm possible @24V supply) • with controller/driver • Linear and sixPoint™ ramps • +10. . . 30V DC supply voltage • Up to 3A RMS motor current • RS485, CAN & USB interface • integrated

NEMA 23 smart stepper motor 12 to 52V, 55Ncm, 256 µSteps, SixPoint ramp controller with CAN interface, SensOstep, StallGuard2 and CoolStep, StealthChop

PD57/60-1276 is an easy to use PANdrive™ smart stepper motor.\n\n The module is controlled via a CAN bus interface and comes with two firmware options – TMCL™ and CANopen®. PD57/60-1276 features StealthChop™ for absolute silent motor control, SpreadCycle™ for high speed stepper motor commutatio \n• Supply Voltage +10 to +30V DC\n• CAN bus interface\n• TMCL™ or CANopen® protocol\n• Integrated SixPoint™ ramp motion controller\n• StealthChop™ silent PWM mode\n• SpreadCycle™ smart mixed decay\n• StallGuard2™ load detection\n• CoolStep™ automatic current scaling\n\n\n;

PD57/60-1276 Hardware Manual

Features • PANdrive™ smart motor • Supply Voltag +10 to +30V DC • CAN bus interface • TMCL or CANopen protocol • Integrated sixPoint™ ramp motion controller • stealthChop™ silent PWM mode • spreadCycle™ smart mixed decay • stallGuard2™ load detection • coolStep™ autom. current scaling

相位探测器 / 移相器

相位探测器 / 移相器

包装：散装 描述：CABLE LOOM FOR PD-1240 电机，电磁阀，螺线管，驱动器板/模块 配件

包装：散装 描述：CABLE LOOM FOR PD-1241 电机，电磁阀，螺线管，驱动器板/模块 配件