NEMA 23 smart stepper motor 12 to 52V, 55Ncm, 256 µSteps, SixPoint ramp controller with CAN interface, SensOstep, StallGuard2 and CoolStep, StealthChop

PD57/60-1276 is an easy to use PANdrive™ smart stepper motor.\n\n The module is controlled via a CAN bus interface and comes with two firmware options – TMCL™ and CANopen®. PD57/60-1276 features StealthChop™ for absolute silent motor control, SpreadCycle™ for high speed stepper motor commutatio \n• Supply Voltage +10 to +30V DC\n• CAN bus interface\n• TMCL™ or CANopen® protocol\n• Integrated SixPoint™ ramp motion controller\n• StealthChop™ silent PWM mode\n• SpreadCycle™ smart mixed decay\n• StallGuard2™ load detection\n• CoolStep™ automatic current scaling\n\n\n;

PD57/60-1276 Hardware Manual

Features • PANdrive™ smart motor • Supply Voltag +10 to +30V DC • CAN bus interface • TMCL or CANopen protocol • Integrated sixPoint™ ramp motion controller • stealthChop™ silent PWM mode • spreadCycle™ smart mixed decay • stallGuard2™ load detection • coolStep™ autom. current scaling

包装：散装 描述：CABLE LOOM FOR PD-1276 电机，电磁阀，螺线管，驱动器板/模块 配件

8-Bit, 500 MSPS, Flash A/D Converter

Description The HI1276 is an 8-bit, ultra-high-speed, flash Analog-to-Digital converter IC capable of digitizing analog signals at a maximum rate of 500 MSPS. The digital I/O levels of this A/D converter are compatible with ECL 100K/10KH/10K. The HI1276 is available in the Industrial tempera

8-Bit 500 MSPS Flash A/D Converter

Description This is a specification that outlines the mechanical and electrical characteristics for the HI1276Y, 8-bit Flash A/D converter IC, in chip (die) form. Features • Differential Linearity Error . . . . . . . . . .±0.5 LSB or Less • Integral Linearity Error. . . . . . . . . .

EPITAXIAL PLANAR PNP TRANSISTOR (GENERAL PURPOSE)

GENERAL PURPOSE APPLICATION. FEATURES • Good Linearity of hFE. • Complementary to KTC3230.

High-Sensitivity LED Driver Array

Overview The LB1276 is an LED driver array. By connecting this IC to LSI output pins whose output current capacity is small, LEDs can be lighted. It features high sensitivity (IIN=80µA max.) and IOUT=30mA driving capacity and is ideally suited for driving LED indicators for use in commercial and

12-Bit, 300ksps Sampling A/D Converters with Reference

文件：451.2 Kbytes Page：24 Pages