High Collector-emitter Voltage, High Density Mounting Type Photocoupler

■ Features 1. High collector-emitter voltage ( VCEO : 70V ) 2. Compact dual-in-line package PC816 : 1-channel type PC826 : 2-channel type PC846 : 4-channel type 3. High isolation voltage between input and output ( VISO : 5 000V rms ) 4. Current transfer ratio ( CTR : MIN. 50 at

High Collector-emitter Voltage/ High Density Mounting Type Photocoupler

Processors

The PC8610 features a high-performance, superscalar e600 core operating between 667 MHz and 1333 MHz. Its smaller 256 KB backside L2 cache saves power and cost for target applications that typically don’t need the full 1 MB cache avail- able in other e600-based devices. The core also includes the Al • e600 Power Architecture™ Processor Core\n• Selectable MPX Bus up to 533 MHz\n• Integrated L2: 256 KB Backside Cache with Optional ECC\n• PCI Express Interface: One 1x, 2x, 4x or 8x and One 1x, 2x or 4x Serial(2.5 Gbaud/lane)\n• Memory Controller: DDR/DDR2 SDRAM with ECC(333, 400 and 533 MHz Data R;

N-channel junction FETs

DESCRIPTION N-channel symmetrical junction field effect transistors in a SOT23 package. FEATURES • High transfer admittance • Low input capacitance • Low feedback capacitance • Low noise. APPLICATIONS • Preamplifiers for AM tuners in car radios.

N-channel junction FETs

DESCRIPTION N-channel symmetrical junction field effect transistors in a SOT23 package. FEATURES • High transfer admittance • Low input capacitance • Low feedback capacitance • Low noise. APPLICATIONS • Preamplifiers for AM tuners in car radios.

UHF linear push-pull power transistor

DESCRIPTION NPN silicon planar epitaxial transistor with two sections in push-pull configuration. The device is encapsulated in a SOT289A 4-lead rectangular flange package, with a ceramic cap. FEATURES • Double stage internal input and output matching networks for an optimum wideband capabi

Integrated Circuit Quad, Normally Open, SPST JFET Analog Switch w/Disable

Description: The NTE861 is a monolithic combination of bipolar and JFET technology producing a one chip quad JFET switch. A unique circuit technique is employed to maintain a constant resistance over the analog voltage range of ±10V. The input is designed to operate from minimum TTL levels, and s

RAIL TO RAIL MICROPOWER BICMOS COMPARATORS

DESCRIPTION The TS86x (Single, Dual & Quad) is a Rail to Rail comparator characterized for 2.7V to 10V operation over -40°C to +85°C temperature range. It exhibits an excellent speed to power ratio, featuring a current consumption of 6µA per comparator and a response time of 500ns at 2.7V for