POWER OPERATIONAL AMPLIFIER

DESCRIPTION The PB51 is a high voltage, high current amplifier designed to provide voltage and current gain for a small signal, general purpose op amp. Including the power booster within the feed back loop of the driver amplifier results in a composite amplifier with the accuracy of the driver

Power Booster Amplifier

DESCRIPTION The PB51 is a high voltage, high current amplifier designed to provide voltage and current gain for a small signal, general purpose op amp. Including the power booster within the feed back loop of the driver amplifier results in a composite amplifier with the accuracy of the driver

300V, 2A, Voltage and Current Gain Power Booster Amplifier

\n\nThe PB51 is a 1.5A, 300V power booster amplifier designed to provide voltage and current gain for a small-signal, general purpose operational amplifier. By using the PB51 power booster within the feedback loop of a driver amplifier, the resulting composite amplifier has the accuracy of the drive •Wide supply range – ±15V to ±150V\n• • 1.5A continuous (PB51)\n• 2.0A continuous (PB51A)\n;

工业级芯片

PB5100 为电池管理芯片，可支持各类锂电池/钠电池的5~10 串电芯应用，提供高稳定度的数据采集，以及相关的保护功能。单节电芯电压测量范围 0-5V，适用于大多数锂电池。采用车规级BCD工艺设计，I2C接口与主机通讯，组成电池组管理系统BMS。\n\nPB5100 内置16bit高精度低噪声VADC，提供可靠的电压数据采集，高度适用于磷酸铁锂电池，并提供温度和快速电流测量。内置 CADC 采集电流，用于高精度电流测量和SOC 计量，内置CEDV算法，可通过GPIO口直接输出SOC状态。\n\nPB5100 提供多种电流、电压、温度、充放电保护。通过快速控制 4类充放电 MOS 实现保护功能 ◇ 最高支持10串锂电池，10-61V\n• 工作模式：40-120uA\n• 运输模式： 2uA\n;

Miniature Power PCB Relay

Miniature Power PCB Relay PB ■ 1pole 10 A, 1 CO or 1 NO contact ■ Environmentally-friendly cadmium-free contacts ■ Class F coil system standard ■ Compact and simple design gives high process security ■ Versions PB1 and PB5: Product in accordance to IEC60335-1 (PB3 on request) ■ RoHS complian

General Purpose Relays PCB Relays

Miniature Power PCB Relay PB ■ 1pole 10 A, 1 CO or 1 NO contact ■ Environmentally-friendly cadmium-free contacts ■ Class F coil system standard ■ Compact and simple design gives high process security ■ Versions PB1 and PB5: Product in accordance to IEC60335-1 (PB3 on request) ■ RoHS complian

General Purpose Relays PCB Relays

Miniature Power PCB Relay PB ■ 1pole 10 A, 1 CO or 1 NO contact ■ Environmentally-friendly cadmium-free contacts ■ Class F coil system standard ■ Compact and simple design gives high process security ■ Versions PB1 and PB5: Product in accordance to IEC60335-1 (PB3 on request) ■ RoHS complian

Miniature Power PCB Relay

Miniature Power PCB Relay PB ■ 1pole 10 A, 1 CO or 1 NO contact ■ Environmentally-friendly cadmium-free contacts ■ Class F coil system standard ■ Compact and simple design gives high process security ■ Versions PB1 and PB5: Product in accordance to IEC60335-1 (PB3 on request) ■ RoHS complian

POWER OPERATIONAL AMPLIFIER

DESCRIPTION The PB51 is a high voltage, high current amplifier designed to provide voltage and current gain for a small signal, general purpose op amp. Including the power booster within the feed back loop of the driver amplifier results in a composite amplifier with the accuracy of the driver

DIAMONDBACK Series Programmable Multi-Channel Solid State Power Controllers

文件：126.19 Kbytes Page：4 Pages