2W STEREO AUDIO AMPLIFIER

The UTC PA3427 is a stereo audio speaker operated on a single 5V supply. It is capable of delivering 2W of output power per channel in Bridge-Tied Load mode into 4Ω load with less than 1% THD+N. Two terminals (GAIN0 and GAIN1) can configure and control the amplifier gain. In order to simplify th •  Depop circuitry integrated \n•  SE gain: 4.1dB \n•  − 2.0W into a 4Ω load \n•  With two mode :BTL and SE \n• Fully differential input \n•  PC-Beep input function \n• Halogen Free;

2W STEREO AUDIO AMPLIFIER

文件：256.16 Kbytes Page：7 Pages

2W STEREO AUDIO AMPLIFIER

文件：270.86 Kbytes Page：7 Pages

2W STEREO AUDIO AMPLIFIER

文件：270.86 Kbytes Page：7 Pages

N-Channel Silicon MOSFET General-Purpose Switching Device

Features • Low ON-resistance. • Ultrahigh-speed switching. • 4V drive.

Multistandard Sound Processor Family

The MSP 34x7G family of single-chip Multistandard Sound Processors covers the sound processing of all analog TV standards worldwide, as well as the NICAM digital sound standards. The full TV sound processing, starting with analog sound IF signal-in, down to processed analog AF-out, is performed in

CMOS System Reset

Outline This IC is a system reset IC developed using the CMOS process. Super low consumption current of 0.25µA typ. has been achieved through use of the CMOS process. Also, detection voltage is high precision detection of ±2. Features 1. Super low consumption current 0.25µA typ. (when VDD

IC for CMOS System Reset

Outline This IC is a system reset IC developed using the CMOS process. Super low consumption current of 0.25µA typ. has been achieved through use of the CMOS process. Also, detection voltage is high precision detection of ±2. Features 1. Super low consumption current 0.25µA typ. (when VDD