600W TRANSIENT VOLTAGE SUPPRESSORS

Features ● Glass Passivated Die Construction ● 600W Peak Pulse Power Dissipation ● 6.8V – 440V Standoff Voltage ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

Silicon Avalanche Diodes - Silicon Avalanche Diodes

Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus, and other integrated circuits. FEATURES • Breakdown voltage range 6.8 to 440 Volts • Uni-directional and Bi-directional

GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 6.8 to 440Volts POWER DISSIPATION - 600 Watts FEATURES ● low leakage ● Uni and bidirectional unit ● Excellent clamping capability ● Plastic material has UL recognition 94V-0 ● Fast response time

600w Transient Voltage Suppressor

Features - plastic package has underwriters laboratory flammability classification 94v-0 - 600w surge capability at 1ms - Excellent clamping capability - Low zener impedance - Fast response time:typically less than 1.0 ps from 0 volts to bv min - High temperature soldering guaran

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE 6.8 to 440 VOLTS 600 WATT PEAK POWER 5.0 WATTS STEADY STATE FEATURES • Plastic package has Underwrites Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 400W surge capability at 1 ms • Excellent clamping capability

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Typical IR less than 1µA above 10V • 600W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts to BV min • Pb fre

Axial Lead Transient Voltage Suppressors (TVS)

P6KE Series 6.8 To 600 V 600W

TRANSIENT VOLTAGE SUPPRESSORS

Voltage Range 6.8 to 400V 500W Peak Power 5.0W Steady State FEATURE . Plastic package has Underwriters Laboratory Flammability Classification 94V-0 . 500W surge capability at10×100us waveform, Duty cycle:0.01 . Excellent clamping capability . Low zener impedance . Fast re

600W Peak Pulse Power Dissipation

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4

6.8 To 600V 600W Axial Lead Transient Voltage Suppressors (TVS)

Features Glass passivated chip junction in DO-15 Package Low leakage Uni and Bidirectional unit Excellent clamping capability 600W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01 Fast response time: typically less than 1.0ps from 0 Volts to VBR min Typical I

TRANSIENT VOLTAGE SUPPRESSOR

FEATURES Available in uni-directional & bi-directional 600W surge capability at 10x100 s waveform, duty cycle: 0.01 High temperature soldering capability 250 / 10 seconds/.375”(9.5mm) lead length/5lbs.,(2.3kg) tension Glass passivated chip junction Low zener impedance Fast response time:

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State)

VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ● Glass passivated chip junction in DO-15 package ● 600W surge capability at 1ms ● Excellent clamping capability ●

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-6.8 to 440 Volts?

VOLTAGE - 6.8 to 440 Volts 600 Watts Peak Power 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classifications 94V-O • 600W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast respones time : typically less than

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ● Glass passivated chip junction in DO-15 package ● 600W surge capability at 1ms ● Excellent clamping capability ● Low zener impeda

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

文件：85.02 Kbytes Page：4 Pages

Transient voltage suppressor power 600 watts

文件：1.00021 Mbytes Page：6 Pages

Axial Lead Transient Voltage Suppressors

文件：267.64 Kbytes Page：4 Pages

封装/外壳：DO-204AC，DO-15，轴向 包装：卷带（TR） 描述：TVS DIODE 7.02VWM 12.71V DO204AC 电路保护 TVS - 二极管

Surface Mount Transient Voltage Suppressors (TVS)

文件：3.90527 Mbytes Page：56 Pages

Axial Lead Transient Voltage Suppressors (TVS)

文件：504.21 Kbytes Page：6 Pages

Transient Voltage Suppressor Diodes

文件：189.54 Kbytes Page：5 Pages

600w Transient Voltage Suppressor

文件：153.11 Kbytes Page：3 Pages

封装/外壳：DO-204AC，DO-15，轴向 包装：散装 描述：TVS Diode 6.6V 600W DO-204AC AX 电路保护 TVS - 二极管

600W TRANSIENT VOLTAGE SUPPRESSOR

文件：74.64 Kbytes Page：6 Pages

600W TRANSIENT VOLTAGE SUPPRESSORS

Features ● Glass Passivated Die Construction ● 600W Peak Pulse Power Dissipation ● 6.8V – 440V Standoff Voltage ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ● Glass passivated chip junction in DO-15 package ● 600W surge capability at 1ms ● Excellent clamping capability ● Low zener impeda

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-6.8 to 440 Volts?

VOLTAGE - 6.8 to 440 Volts 600 Watts Peak Power 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classifications 94V-O • 600W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast respones time : typically less than

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State)

VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ● Glass passivated chip junction in DO-15 package ● 600W surge capability at 1ms ● Excellent clamping capability ●

6.8 To 600V 600W Axial Lead Transient Voltage Suppressors (TVS)

Features Glass passivated chip junction in DO-15 Package Low leakage Uni and Bidirectional unit Excellent clamping capability 600W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01 Fast response time: typically less than 1.0ps from 0 Volts to VBR min Typical I

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State)

VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ● Glass passivated chip junction in DO-15 package ● 600W surge capability at 1ms ● Excellent clamping capability ●

P6KE Series

Features: • Plastic package • Exceeds environmental standards of MIL-STD-19500 • 600 W surge capability at 10 × 1,000 μs waveform, duty cycle: 0.01% • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 V to VBR for unidirectional a

Transient Voltage Suppression Diodes P6KE Series, 600W

Features • Exceeds environmental standards of MIL-STD-19500 • 600W surge capability at 10 × 1,000μs waveform, duty cycle: 0.01% • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1ps from 0V to VBR for unidirectional and 5ns for bidirectio

TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.8V- 459V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O This is a Pb − Free Device All

Transient Voltage Suppressors (TVS)

Features ■ Glass passivated junction ■ Low zener impedance ■ Excellent clamping capability ■ 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response time ■ Typical IR less than 1μA above 12V. ■ High Temperature soldering guaranteed: 2

Transient Voltage Suppression Diodes

The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Description Features • 600W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Glass pa

Unidirectional And Bidirectional Transient Voltage Suppressor

Features: • Low leakage • Uni and Bi-Directional unit • Excellent clamping capability • Plastic material has UL recognition 94V-0 • Fast response time Description Unidirectional And Bidirectional Transient Voltage Suppressors

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-6.8 to 440 Volts?

VOLTAGE - 6.8 to 440 Volts 600 Watts Peak Power 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classifications 94V-O • 600W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast respones time : typically less than

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ● Glass passivated chip junction in DO-15 package ● 600W surge capability at 1ms ● Excellent clamping capability ● Low zener impeda

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Typical IR less than 1µA above 10V • 600W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts to BV min • Pb fre

TRANSIENT VOLTAGE SUPPRESSORS

Features ● Economical series ● Available in both unidirectional and bidirectional construction ● 6.8 to 440 stand-off volts available ● 600 watts peak pulse power dissipation APPLICATION This TVS is an economical, molded, commercial product voltage sensitive components from d

Voltage 6.8V ~ 480V 600 Peak Power / 5.0W Steady State 600W Peak Power TVS

FEATURES * 600 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds / .375(9.5mm) lead lengt

TRANSIENT VOLTAGE SUPPRESSORS

Voltage Range 6.8 to 400V 500W Peak Power 5.0W Steady State FEATURE . Plastic package has Underwriters Laboratory Flammability Classification 94V-0 . 500W surge capability at10×100us waveform, Duty cycle:0.01 . Excellent clamping capability . Low zener impedance . Fast re

Transient Voltage Suppressors

Features 1. Halogen-free 2. Rohs compliant 3. Typical maximum temperature coefficient 4. ΔVBR =0.1xVBR@25°C x ΔT 5. Glass passivated Chip junction in DO-15 package 6. 600W peak pulse capadility at 10x1000μs waveform,repetition rate (duty cycles):0.01 7. Fast response time:typi

600W Peak Pulse Power Dissipation

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage - 6.8 to 600 Volts Peak Pulse Power-600 Watts FEATURES * Glass passivated chip * 600 W peak pulse power capability with a 10/1000 µs wavefrom, repetitive rate (duty cycle) : 0.01 * Low leakage * Excellent clamping capability * Very fast response time

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 6.8 to 600 Volts

VOLTAGE - 6.8 to 600 Volts 600 Watt Peak Power / 5.0 Watt Steady State FEATURES ◎ Plastic package ◎ Glass passivated chip junction in DO-15 Package ◎ 600W surge capability at 10/1000 µs wave form ◎ Excellent clamping capability ◎ Low zener impedance ◎ Fast response time:

TRANSIENT VOLTAGE SUPPRESSOR

FEATURES Available in uni-directional & bi-directional 600W surge capability at 10x100 s waveform, duty cycle: 0.01 High temperature soldering capability 250 / 10 seconds/.375”(9.5mm) lead length/5lbs.,(2.3kg) tension Glass passivated chip junction Low zener impedance Fast response time:

Glass passivated junction

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4

Axial Lead Transient Voltage Suppressors (TVS)

P6KE Series 6.8 To 600 V 600W

Transient Voltage Suppressors

FEATURES ◇ Plastic package. ◇ Glass passivated chip junction in DO-15 package. ◇ 600W peak pulse power capability on 10/1000μs waveform. ◇ Excellent clamping capability. ◇ Low zener impedance. ◇ Fast response time: typically less than 1.0ps from 0 volt to BV min. ◇ Typical IR

600 Watt Transient Voltage Suppressors

Features • Glass passivated junction. • 600W Peak Pulse Power capability at 1.0 ms. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical IR less than

600w Transient Voltage Suppressor

Features - plastic package has underwriters laboratory flammability classification 94v-0 - 600w surge capability at 1ms - Excellent clamping capability - Low zener impedance - Fast response time:typically less than 1.0 ps from 0 volts to bv min - High temperature soldering guaran

Silicon Avalanche Diodes - Silicon Avalanche Diodes

Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus, and other integrated circuits. FEATURES • Breakdown voltage range 6.8 to 440 Volts • Uni-directional and Bi-directional

600W Transient Voltage Suppressors

Peak Pulse Power 600 Watt Stand-off Voltage 6.8 To 440 VOLTS Feature: * 600 Watt Peak Power Dissipation * Glass Passivated Die Construction * Excellent Clamping CapabilityFast Response Time * High Temperat Soldering Guaranteed : 265 C/10 sec/.375. (9.5mm) Lead Length, 51bs., (2

600W TRANSIENT VOLTAGE SUPPRESSORS

Features ● Glass Passivated Die Construction ● 600W Peak Pulse Power Dissipation ● 6.8V – 440V Standoff Voltage ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 6.8 to 440Volts POWER DISSIPATION - 600 Watts FEATURES ● low leakage ● Uni and bidirectional unit ● Excellent clamping capability ● Plastic material has UL recognition 94V-0 ● Fast response time

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 550 Volts 600 Watt Peak Power 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated chip junction in DO-15 (DO-204AC) package • 600W surge capability at 10/1000 µs • Low zenen impedance • E

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE 6.8 to 440 VOLTS 600 WATT PEAK POWER 5.0 WATTS STEADY STATE FEATURES • Plastic package has Underwrites Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 400W surge capability at 1 ms • Excellent clamping capability

TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 6.8 to 440 Volts Peak Pulse Power - 600 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● High Temperat Soldering Guaranteed : 265 °C/10 sec/.375. (9.5mm) Lead Length

TRANSIENT VOLTAGE SUPPRESSOR

VBR : 6.8 - 440 Volts PPK : 600 Watts FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V