6.8V to 400V GPP TRANSIENT VOLTAGE SUPPRESSORS

Features ■ 400 WATT PEAK POWER PROTECTION ■ EXCELLENT CLAMPING CAPABILITY ■ FAST RESPONSE TIME ■ TYPICAL IR

400W Transient Voltage Suppressor

Stand-off Voltage: 6.8 ~ 440V Power Dissipation: 440 Walts Features: ● Glass passivated chip ● Low leakage ● Uni and Bidirection unit ● Excellent clamping capability ● The plastic material has UL recognition 94V-0 ● Fast response time

400 Watts Transient Voltage Suppressor Diodes

FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than 1.0ps from 0 volt to VBR for unidirectional and 5.0ns for bidirectional - Typical IR less than 1μA above 10V - UL recognized file # E-32

GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 6.8 to 440Volts POWER DISSIPATION - 400 Watts FEATURES ● low leakage ● Uni and bidirectional unit ● Excellent clamping capability ● Plastic material has UL recognition 94V-0 ● Fast response time

400 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 6.8 to 440 Volts 400 Watts Peak Power 1.0 Watts Steady State FEATURES * 400 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High

TRANSIENT VOLTAGE SUPPRESSOR

FEATURES : * 400W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State)

VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-41 package • 400W surge capability at 1ms • Excellent clamping capability • Low zener imped

400W TRANSIENT BOLTAGE SUPPRESSORS

Features ● Glass Passivated Die Construction ● 400W Peak Pulse Power Dissipation ● 6.8V – 440V Standoff Voltage ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

TRANSIENT VOLTAGE SUPPRESSORS DIODE

400 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 6.8 to 440 Volts 400 Watts Peak Power 1.0 Watts Steady State FEATURES * 400 Watts Surge Capability at 1ms * Excellent clamping capability * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Low zener impedance * Typical IR less than 1mA above 10V * High

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE 6.8 to 144 VOLTS 400 WATT PEAK POWER 1.0 WATTS STEADY STATE FEATURES • Plastic package has Underwrites Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 400W surge capability at 1 ms • Excellent clamping capability • Low zener impe

Transient Voltage Suppression Diodes

Description The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • Halogen-free • Rohs compliant • Typical maximum temperature coefficient • ΔVBR =0.1xVBR@25°

Transient Voltage Suppressor Diodes

■ Features ● PPP 400W ● VBR 6.8V-540V ■ Applications ● Clamping Voltage

Transient Voltage Suppressors Breakdown Voltage 6.8 to 440V

Breakdown Voltage 6.8 to 440V Features • Plastic package • Excellent clamping capability • High temperature soldering guaranteed: 260℃/10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3kg) tension • Lead and body according with RoHS standard

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ● Glass passivated chip junction in DO-41 package ● 400W surge capability at 1ms ● Excellent clamping capability ● Low zener impedan

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 6.8 to 550 Volts

VOLTAGE - 6.8 to 550 Volts 400 Watt Peak Power / 1.0 Watt Steady State FEATURES ◎ Plastic package ◎ Glass passivated chip junction in DO-41 Package ◎ 400W surge capability at 10/1000 µs wave form ◎ Excellent clamping capability ◎ Low zener impedance ◎ Fast response time: typically less tha

Transient Voltage Suppressors

FEATURES ◇ Plastic package. ◇ Glass passivated chip junction in DO-204AL/DO-41 package. ◇ 400W peak pulse power capability on 10/1000μs waveform. ◇ Excellent clamping capability. ◇ Low zener impedance. ◇ Fast response time: typically less than 1.0ps from 0 volt to BV min. ◇ Typical IR less

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage - 6.8 to 600 Volts Peak Pulse Power - 400 Watts FEATURES * Glass passivated chip * 600 W peak pulse power capability with a 10/1000 µs wavefrom, repetitive rate (duty cycle) : 0.01 * Low leakage * Excellent clamping capability * Very fast response time

400W TRANSIENT VOLTAGE SUPPRESSOR

Transient Voltage Suppressor

VBR : 6.8 - 550 Volts PPK : 400 Watts Features • 400W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) • Typical IR less then 1μA above 10V • RoHS compliant package Applications • For

Transient Voltage Suppressors

Features 1. Halogen-free 2. Rohs compliant 3. Typical maximum temperature coefficient 4. ΔVBR =0.1xVBR@25°C x ΔT 5. Glass passivated Chip junction in P600 package 6. 400W peak pulse capadility at 10x1000μs waveform,repetition rate (duty cycles):0.01 7. Fast response time:typically less than

TRANSIENT VOLTAGE SUPPRESSORS

Voltage Range 6.8 to 400 V 400 W Peak Power FEATURE . Plastic package has Underwriters Laboratory Flammability Classification 94V-0 . 400W surge capability at10×100us waveform, Duty cycle: 0.01 . Excellent clamping capability . Low zener impedance . Fast response time： Typically less then 1

TRANSIENT VOLTAGE SUPPRESSOR

FEATURES: * 400W surge capability at 1 ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min) * Typical IR less then 1μA above 10V * Pb/RoHS Free

400 Peak Power

FEATURES * 400 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds / .375(9.5mm) lead lengt

400 Watts Transient Voltage Suppressor Diodes

Features ◇ 400W surge capability at 10 x 100us waveform, duty cycle: 0.01 ◇ Excellent clamping capability ◇ Low zener impedance ◇ Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 ns for bidirectional ◇ Typical IR less than 1 uA above 10V ◇ High tem

6.8 To 600V 400W Axial Lead Transient Voltage Suppressors (TVS)

Features Glass passivated chip junction in DO-41 Package Low leakage Uni and Bidirectional unit Excellent clamping capability 400W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01 Fast response time: typically less than 1.0ps from 0 Volts to VBR min Typical I

TRANSIENT VOLTAGE SUPPRESSOR

FEATURES Available in uni-directional & bi-directional Glass passivated chip junction 400W surge capability at 10×100 s waveform, duty cycle: 0.01% 　 Excellent clamping capability Low zener impedance Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirection a

TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 400W Peak Pulse Power Dissipation 6.8V- 440V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O This is a Halogen Free Device A

400W TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 400W Peak Pulse Power Dissipation 5.5V – 513V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Voltage Typical Response Time

400 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 6.8 to 440 Volts 400 Watts Peak Power 1.0 Watts Steady State FEATURES * 400 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High

400 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 6.8 to 600 Volts 400 Watts Peak Power FEATURES * 400 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering gu

GLASS PASSIVAED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

文件：877.68 Kbytes Page：4 Pages

Axial Lead Transient Voltage Suppressors

文件：352.74 Kbytes Page：4 Pages

P4KE Transient Voltage Suppressor Diode Series

文件：520.9 Kbytes Page：4 Pages

Unidirectional and Bidirectional Transient Voltage Suppressors

文件：472.28 Kbytes Page：4 Pages

400W Transient Voltage Suppressor

文件：1.28117 Mbytes Page：5 Pages

DO-41 Plastic-Encapsulate Diode

文件：1.52137 Mbytes Page：7 Pages

400W TRANSIENT VOLTAGE SUPPRESSORS

文件：261.45 Kbytes Page：4 Pages

400 Watts Transient Voltage Suppressor Low Dynamic impedance

文件：224.6 Kbytes Page：6 Pages

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

文件：1.0746 Mbytes Page：4 Pages

TRANSIENT VOLTAGE SUPPRESSOR

文件：51.13 Kbytes Page：4 Pages

GPP TRANSIENT VOLTAGE SUPPRESSOR (400 WATT PEAK POWER 1.0 WATT STEADY STATE)

文件：1.04907 Mbytes Page：5 Pages

TVS 瞬态抑制二极管

400W TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 400W Peak Pulse Power Dissipation 5.5V – 513V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Voltage Typical Response Time

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State)

VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-41 package • 400W surge capability at 1ms • Excellent clamping capability • Low zener imped

GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 6.8 to 440Volts POWER DISSIPATION - 400 Watts FEATURES ● low leakage ● Uni and bidirectional unit ● Excellent clamping capability ● Plastic material has UL recognition 94V-0 ● Fast response time

TRANSIENT VOLTAGE SUPPRESSOR

BREAKDOWN VOLTAGE: 6.8 --- 440 V PEAK PULSE POWER: 400 W FEATURES ◇ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◇ Glass passivated junction ◇ 400W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01 ◇ Excellent clamping

TRANSZORB® Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Sold

POWER 400Watts VOLTAGE 6.8 to 440 Volts

Features · Plastic package has Underwriters Laboratory Flammability Classification 94V-0 · Glass passivated junction · 400W peak pulse power capability with a 10/100μS waveform, reptition rate(duty cycle) : 0.01 · Excellent clamping capability · Low incremental surge resistance · Fast respon

TRANSIENT VOLTAGE SUPPRESSORS

Features • Glass passivated junction • 400 W pulse capability on 10/1000 µs wave form • Excellent clamping capability • Low Zener impedance • Fast response time

PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR

Breakdown Voltage 6.8 to 400 Volts Peak Pulse Power 400 Watts FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated or silastic guard junction (open junction) • 400W peak pulse power capability with a 10/1000μs Waveform, repetition rate (d

400W Peak Power / 1.0W Steady State 400W Peak Power TVS

FEATURES * 400 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds / .375(9.5mm) lead lengt

400 Watt Transient voltage suppressors 6.8to400 volts

Features ● Unidirectional And Bidirectional ● Low Inductance ● High Temp Soldering: 250°C for 10 Seconds At Terminals ● For Bidirectional Devices Add “C” To The Suffix Of The Part Number: i.e. P4KE6.8C or P4KE6.8CA for 5 Tolerance Devices

Transient Voltage Suppressors

Features ◆ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◆ Glass passivated junction ◆ 400W peak pulse power capabililty on 10/1000uS waveform, repetition rate (duty cycle): 0.01 ◆ Excellent clamping capability ◆ Low incremental surge resistance ◆ Very fast re

TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 6.8 to 440 Volts Peak Pulse Power - 400 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

Transient Voltage Suppressors Breakdown Voltage 6.8 to 440V

Breakdown Voltage 6.8 to 440V Features • Plastic package • Excellent clamping capability • High temperature soldering guaranteed: 260℃/10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3kg) tension • Lead and body according with RoHS standard

GLASS PASSIVAED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage:6.8-440 Volts Peak Pulse Power:400 Watts FEATURE ♦ 400w peak pulse power capability ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time:typically less than 1.0ps from 0v to VBR for unidirectional and 5.0ns ror bidirectional types. ♦ High

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ● Glass passivated chip junction in DO-41 package ● 400W surge capability at 1ms ● Excellent clamping capability ● Low zener impedan

Unidirectional and bidirectional Transient Voltage Suppressor Diodes

Unidirectional and bidirectional Transient Voltage Suppressor Diodes • Peak pulse power dissipation 400 W • Nominal breakdown voltage 6.8...440 V • Plastic case DO-15 • Weight approx. 0.4 g • Plastic

Transient Voltage Suppressor Diodes

FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than 1.0ps from 0 volt to VBR for unidirectional and 5.0ns for bidirectional - Typical IR less than 1μA above 10V - UL recognized file # E-32